Lifesafety Power FPO150/150-2C8P2D8PE2M 150W Power Supply with Relay Lock Control
Overview
The FPO150/150-2C8P2D8PE2M is a 150W power supply designed for access control and life safety installations requiring distributed relay-switched load management. It delivers either 12A at 12VDC or 6A at 24VDC, making it suitable for powering multiple electromagnetic locks, solenoids, and auxiliary control circuits in a single enclosure. Each of the 8 relay-switched outputs is class 2 power-limited at 2.5A per channel, with independent selection of failsafe or failsecure operation per output — critical for systems where different zones demand different failure modes (e.g., emergency egress unlocking vs. secure-on-power-loss).
Compatibility
This unit integrates into Lifesafety Power control architectures and supports supervision across 8 DC auxiliary outputs, with each configurable for Bus1 or Bus2 assignment. Installation typically pairs with access control panels, door automation controllers, and IP camera power distribution when integrated into converged physical security systems.
Output Specifications
Relay Lock Control Outputs: 8 channels at 2.5A class 2 power-limited per output; each selectable for FAI (fire alarm interface), failsafe, or failsecure mode. This per-output flexibility eliminates the need for external relay modules and simplifies wiring in multi-zone deployments. DC Auxiliary Outputs: 8 channels at 2.5A class 2 power-limited, bus-assignable for remote supervision and status monitoring across distributed panels.
Installation Considerations
Verify local fire code requirements for class 2 power-limited circuit separation before integration. The voltage/amperage configuration (12V/12A or 24V/6A) must be selected at procurement and is not field-changeable. Coordinate with panel builders on failsafe/failsecure mode assignment before commissioning to avoid operational surprises during an emergency egress event.
