Middle Atlantic LH Xtype Turret 4RU - LH-XTAT4RU

Middle Atlantic LH-XTAT4RU Lund/Halsey X-Type Turret 4RU Equipment Pod

The Middle Atlantic LH-XTAT4RU is a 4RU turret equipment pod from the Lund/Halsey X-Type broadcast console line — designed to mount rack gear directly at the operator position in control rooms, broadcast suites, and security command centers. At 21 inches wide, 7 inches tall, and 12 inches deep, it gives you four rack units of usable equipment space within arm's reach of the operator without consuming floor space or requiring a separate equipment rack behind the room.

Overview

The LH-XTAT4RU integrates into Middle Atlantic's X-Type console architecture as a turret-mounted equipment bay. Cage nut rails on standard 21-inch width accept virtually any rack-mount gear — processors, KVM switches, media converters, or compact NVR appliances — giving AV and security integrators a clean, repeatable way to surface equipment at the desk. TAA compliance makes it viable for federal, government, and publicly funded installations without exception requests. For broader context on Middle Atlantic rack and console solutions, the X-Type line is a modular system where turrets, worksurfaces, and CPU storage pods bolt together into a single cohesive console footprint.

Key Features

• 4RU Rack Capacity in a 7-Inch Profile: Seven inches of height fits neatly above or within a console worksurface without blocking sightlines — enough space for a compact NVR, a KVM, or a patch panel that operators need within reach rather than in a remote rack room.
• 21-Inch Width with Cage Nut Rails: Standard 21-inch rack rail spacing with cage nut mounting means you're not locked into proprietary hardware. Any standard rack-mount equipment fits without adapter plates or rail kits — a real time-saver on commissioning day.
• 12-Inch Depth: Shallow enough for comfortable turret positioning without encroaching on knee clearance or worksurface area. Shallow-depth appliances and 1U processors install cleanly; deeper 2-post equipment may require a shelf or rear support depending on weight.
• 8 lb Assembled Weight: The pod itself ships at 8 lbs (3.6 kg), keeping the console's total structural load manageable. Budget for the equipment weight on top — plan accordingly if loading a multi-channel NVR or dense patch panel.
• Ships Flat-Pack: The LH-XTAT4RU does not ship pre-assembled (Ships Flat: No in the spec sheet), so factor in assembly time on-site. Middle Atlantic X-Type consoles use tool-assisted modular assembly — not complex, but schedule it before the equipment load-in.
• TAA Compliant, UK Origin: Country of origin is the United Kingdom and the unit carries TAA compliance, satisfying Trade Agreements Act requirements for U.S. government procurement without a waiver. Confirm your specific contract vehicle requirements, but TAA status is verified for this SKU.
• Available Internationally: Cleared for international shipping, which matters for broadcast and government integrators managing multi-site or cross-border deployments from a single PO.

Integration and Compatibility

The LH-XTAT4RU is purpose-built for Middle Atlantic Lund/Halsey X-Type consoles and slots into the modular X-Type architecture alongside worksurfaces, CPU pods, and monitor mounts. Cage nut rails accommodate standard EIA rack-mount equipment. For security operations centers, pairing this turret pod with a compact NVR at the operator position shortens the cable run between display and recording appliance. If your design calls for rack accessories such as blanking panels, rack shelves, or cable management, those integrate directly into the cage nut rail system.

Frequently Asked Questions

Q: Is the LH-XTAT4RU TAA compliant?

A: Yes. The LH-XTAT4RU carries TAA (Trade Agreements Act) compliance and is manufactured in the United Kingdom, satisfying federal procurement requirements under TAA.

Q: What rack rail type does the LH-XTAT4RU use?

A: Cage nut rails — standard EIA spacing. No proprietary hardware required; any standard rack-mount equipment installs directly.

Q: How much usable rack space does the LH-XTAT4RU provide?

A: Four rack units (4RU) within a 7-inch overall height and 12-inch depth.

Q: Does the LH-XTAT4RU (often searched as LH XTAT4RU) ship pre-assembled?

A: No. It ships flat and requires on-site assembly as part of the X-Type console build-out.

Q: Can the LH-XTAT4RU be used in international deployments?

A: Yes. It is cleared for international shipping and available internationally per the manufacturer specification.

James Everett

The LH-XTAT4RU is a piece of console infrastructure I specify when the design calls for equipment at the operator station rather than in a back-of-room rack — the 12-inch depth and 7-inch height keep it from dominating the worksurface, and four rack units is exactly the right amount of space for a compact appliance plus a patch point. The cage nut rail system means I'm not hunting for proprietary fasteners on commissioning day.

Technical Highlights:

• 4RU / 7-inch height: Fits above a standard worksurface without blocking operator sightlines — usable for a 1U NVR, a KVM extender, or a 2U media converter shelf with room to spare.
• TAA Compliant, UK Origin: Pre-verified for federal and government projects; no country-of-origin exception needed on GSA or SEWP vehicle orders.
• 8 lb pod weight: Light enough that the console structure handles it cleanly, but remember you're adding equipment weight on top — a loaded 4RU bay with a dense NVR can push 25–30 lbs total on the turret arm.

Deployment Considerations:

• Assembly is required on-site (ships flat) — schedule the X-Type console build before equipment load-in, not the same day, especially on multi-pod console configurations.
• Twelve-inch depth works for shallow 1U appliances but constrains deeper 2-post equipment; use a rack shelf or rear support rail for anything over roughly 14 inches depth or above 10 lbs without front-panel support.

The LH-XTAT4RU is the right call for security operations centers and broadcast control rooms where operators need direct access to recording or switching equipment without a walk to a back rack — specifically on X-Type console layouts where the turret position is already in the design.