Lenovo 4XB7A80530 3.5 5200 480GB EN SATA SSD-ST50 V2

Lenovo 4XB7A80530 480GB SATA Enterprise SSD for ThinkSystem ST50 V2

Overview

The Lenovo 4XB7A80530 is a 480GB entry-level enterprise SATA solid-state drive designed for the ThinkSystem ST50 V2 tower server platform. If you're deploying a compact surveillance recording server, edge compute node, or branch office data store built on the ST50 V2, this is the purpose-matched storage option — factory-qualified for the platform rather than a generic aftermarket drive that forces you to troubleshoot firmware compatibility or warranty coverage after install.

The drive connects via SATA and ships in a 3.5-inch form factor, fitting the ST50 V2's hot-swap or fixed bays directly without an adapter sled. At 2.00 lb, the drive weight is consistent with a standard 3.5-inch enterprise SSD carrier assembly.

Key Features

• Platform-matched SATA interface: The 4XB7A80530 uses the SATA interface native to the ST50 V2, so there's no PCIe or NVMe slot consumed — those remain available for higher-throughput workloads or expansion cards. If your workload is sequential surveillance video writes rather than low-latency IOPS, SATA is the right bus and keeps cost in line.
• 3.5-inch form factor: Drops directly into the ST50 V2's standard 3.5-inch bays. No 2.5-to-3.5-inch adapter bracket required, which simplifies installation in space-constrained rack-adjacent or closet deployments.
• 480GB capacity: Sized for OS and application hosting on a dedicated system volume, or as a secondary analytics scratch drive alongside larger spinning media. In a 24/7 surveillance recording context, pair this with higher-capacity HDDs for the video store — use the SSD for the VMS application, database, and motion index where random read/write latency matters.
• UNSPSC 43201830 classification: Correctly classified as a solid-state storage device, which matters for procurement systems that validate commodity codes against approved categories — no manual override needed in most enterprise purchasing workflows.

Integration and Compatibility

The 4XB7A80530 is qualified for the Lenovo ThinkSystem ST50 V2 tower server. Verify against the ST50 V2 server storage compatibility matrix before deploying in other ThinkSystem platforms — Lenovo's platform-specific qualification process means a drive validated for one chassis generation may not be supported on another. For broader network-attached storage builds or multi-bay NVR appliances, consult the platform HCL directly. Explore the full Lenovo server and storage catalog for compatible components, or review our storage planning guide for surveillance retention sizing.

Frequently Asked Questions

Q: What server platform is the Lenovo 4XB7A80530 designed for?

A: The 4XB7A80530 is qualified for the Lenovo ThinkSystem ST50 V2 tower server. Always verify compatibility against the current ST50 V2 options and parts list before ordering for other platforms.

Q: What interface does the 4XB7A80530 use?

A: It uses a SATA interface. It does not occupy a PCIe or NVMe slot.

Q: What is the form factor of the 4XB7A80530?

A: The drive ships in a 3.5-inch form factor, compatible with standard 3.5-inch server bays without an adapter bracket.

Q: What is the capacity of this drive?

A: 480GB, as indicated in the product name (480GB EN SATA SSD-ST50 V2).

Q: Can this SSD be used as a primary OS drive in an ST50 V2-based surveillance server?

A: Yes — 480GB is sufficient for a VMS operating system, application binaries, and motion/analytics index. For video retention storage, pair with higher-capacity HDDs in the remaining bays.

Marty Allison

The 4XB7A80530 is a platform-specific qualification decision as much as a storage decision. Lenovo validates drives against specific ThinkSystem generations, and deploying an unqualified drive — even one that fits physically — can void server support and trigger firmware-level rejection on some platforms. The SATA interface on this 480GB drive is the correct match for the ST50 V2's storage controller without adding bus complexity.

Technical Highlights:

• SATA interface: Keeps PCIe lanes free for expansion — relevant if you're adding a capture card, network adapter, or GPU for edge analytics on the same ST50 V2 chassis.
• 3.5-inch form factor: No adapter hardware required in ST50 V2 bays; reduces install time and eliminates a mechanical failure point in carrier-based configurations.
• 480GB capacity: Right-sized for a VMS application volume — enough headroom for OS, VMS binaries, motion index, and export staging without over-provisioning a tier that doesn't need it.

Deployment Considerations:

• Do not assume cross-platform compatibility within the ThinkSystem family — the ST50 V2 HCL is the authoritative source; the same part number may not appear on the ST250 V2 or SR series lists.
• For surveillance deployments writing continuous 24/7 streams, plan the video retention tier separately using high-capacity HDDs optimized for streaming writes; the 4XB7A80530 is best positioned as the system/application drive, not the primary video store.

This drive is the right call for an ST50 V2 deployment where you need a qualified, no-hassle system volume — specifically in branch office NVR builds or compact edge servers where platform warranty integrity matters as much as the storage spec itself.