Lenovo 4X97A87136 SR630 V3 AnyBay Backplane SAS/SATA Cable

Overview

The Lenovo 4X97A87136 is a factory-new, genuine internal cable designed for the ThinkSystem SR630 V3 rack server. It connects the 10x2.5" G5 AnyBay backplane to the system's SAS/SATA controller, supporting both SAS and SATA drive populations in the same bay configuration — the defining feature of AnyBay designs. If you're expanding or replacing drive cabling in an SR630 V3 chassis with a 10-bay 2.5" AnyBay backplane, this is the correct OEM cable to maintain signal integrity and platform compatibility.

Key Features

• Dual-protocol support (SAS and SATA): The AnyBay backplane architecture lets you mix SAS and SATA drives in the same 10-bay enclosure without reconfiguring the backplane. This cable is the signal path that makes that flexibility possible — replacing it with a non-OEM part risks protocol errors or degraded throughput.
• Platform-specific fit: Designed exclusively for the SR630 V3 with the 10x2.5" G5 AnyBay backplane. Connector keying, cable routing, and length are matched to the SR630 V3 chassis geometry. Do not attempt to use this cable in earlier SR630 generations or different backplane configurations without verifying compatibility with Lenovo's configurator.
• Factory-new genuine part: Sourced as a new component, not pulled or refurbished. In a storage backplane path, connector wear and cable integrity directly affect drive reliability and error rates — genuine new cabling removes that variable.

Integration & Compatibility

The 4X97A87136 is validated for the Lenovo ThinkSystem SR630 V3 with the 10x2.5" G5 AnyBay backplane configuration. Verify your exact backplane and chassis generation before ordering — the SR630 product line spans multiple backplane variants, and cable assemblies are not interchangeable across generations. Consult Lenovo's SR630 V3 product guide or parts compatibility matrix to confirm this SKU matches your specific server build.

Frequently Asked Questions

Q: Which server is the 4X97A87136 compatible with?

A: The 4X97A87136 is designed for the Lenovo ThinkSystem SR630 V3 equipped with the 10x2.5" G5 AnyBay backplane. It is not validated for earlier SR630 generations or other server models.

Q: Does this cable support both SAS and SATA drives?

A: Yes. The AnyBay backplane design supports mixed SAS and SATA drive populations, and this cable carries both protocols to the backplane from the storage controller.

Q: Can I use a third-party cable instead of the 4X97A87136?

A: Lenovo validates SR630 V3 storage configurations with OEM cables. Third-party alternatives may not match connector keying, length, or signal specifications, which can affect drive detection and stability.

Q: Is this a new or refurbished part?

A: The 4X97A87136 is supplied as factory-new — not pulled, not refurbished.

Karl Wilson

When customers contact us about drive detection failures or instability in an SR630 V3 AnyBay configuration, a damaged or incorrect backplane cable is one of the first things to check. The 4X97A87136 is the OEM cable that Lenovo specifies for the 10x2.5" G5 AnyBay backplane — it's a platform-specific assembly, not a generic SAS cable you can substitute freely.

Technical Highlights:

• SAS and SATA dual-protocol: The AnyBay backplane lets you seat either drive type in any bay — this cable is the signal path that makes mixed populations work without a separate backplane per protocol.
• Platform-matched assembly: Connector type, keying, and cable length are specific to the SR630 V3 chassis. OEM fit means no improvised routing, no strain on connectors, and no guesswork on clearance.
• Genuine new part: Backplane cables in active storage arrays are wear items. A factory-new cable eliminates signal degradation from connector fatigue that pulled or refurbished parts can carry.

Deployment Considerations:

• Confirm your exact backplane generation before ordering — the SR630 V3 ships with multiple backplane configurations, and cable assemblies are not cross-compatible. Lenovo's SR630 V3 parts guide is the definitive reference.
• This cable is an internal server component, not a standalone storage interface. It has no external connectors and serves no purpose outside the SR630 V3 chassis it was designed for.

The 4X97A87136 is the right call for SR630 V3 deployments requiring a cable replacement or a spare during planned maintenance windows — particularly in environments running mixed SAS/SATA storage pools where backplane integrity directly affects array stability.