Lenovo 4X97A80415 SR650 V2 2.5" Front BP3 Sas/sata Cbl V2

Lenovo 4X97A80415 SR650 V2 2.5-Inch Front Backplane SAS/SATA Cable

Overview

The Lenovo 4X97A80415 is a factory-new SAS/SATA interconnect cable engineered specifically for the ThinkSystem SR650 V2 server platform. Designed as the Front Backplane 3 (BP3) cable variant, the 4X97A80415 routes storage traffic between the server's front 2.5-inch drive backplane and the internal storage controller — a purpose-built replacement or upgrade component for SR650 V2 builds and field-service scenarios. If you are expanding storage in an SR650 V2 or recovering from a damaged cable, this is the Lenovo-specific part to source.

Because the SR650 V2 uses a modular backplane architecture, each backplane position requires a matched cable. The 4X97A80415 covers the BP3 position in the 2.5-inch front-drive configuration. Using a non-matched or generic cable risks compatibility issues with the server's integrated expander and backplane management subsystem — use the correct Lenovo option part for the specific backplane slot.

Key Features

• Dual-Protocol Interface (SAS and SATA): Supporting both SAS and SATA drive protocols, this cable gives you flexibility to populate the BP3 backplane with either enterprise SAS drives for maximum endurance and dual-port resilience, or SATA drives for higher-capacity, cost-optimized storage tiers — without changing the cable.
• SR650 V2 Platform-Specific Fit: Designed exclusively for the ThinkSystem SR650 V2, the 4X97A80415 routes and connectorizes exactly for the chassis geometry. Cables from adjacent SR650 generations or other ThinkSystem models are NOT interchangeable — verify the exact server generation before ordering.
• Compact, Pre-Routed Form Factor: At 9.40 x 6.00 x 2.40 inches and 0.18 lb, the cable assembly is sized and shaped to route within the SR650 V2 chassis without modifications. Minimal weight means no strain on connectors during chassis vibration in rack environments.

Integration and Compatibility

The 4X97A80415 is intended for use in Lenovo ThinkSystem SR650 V2 servers configured with a 2.5-inch front drive bay and a BP3 backplane position. Verify your SR650 V2 chassis configuration, backplane slot, and storage controller type before ordering — Lenovo's server components lineup includes multiple cable variants for different backplane positions, and selecting the wrong variant will result in a non-fit. Consult the SR650 V2 maintenance manual or Lenovo's parts lookup to confirm 4X97A80415 is the correct BP3 cable for your specific configuration. This cable is relevant to builds using Lenovo ThinkSystem servers in data center, edge compute, and enterprise storage environments.

Frequently Asked Questions

Q: What server is the 4X97A80415 compatible with?

A: The 4X97A80415 is designed for the Lenovo ThinkSystem SR650 V2 server, specifically the 2.5-inch front drive bay BP3 backplane position. It is not confirmed compatible with other ThinkSystem generations without verification against Lenovo's parts documentation.

Q: Does the 4X97A80415 support both SAS and SATA drives?

A: Yes. The cable supports both SAS and SATA interfaces, allowing the BP3 backplane position to be populated with either drive type depending on your storage tier strategy.

Q: What are the dimensions and weight of the 4X97A80415?

A: The cable assembly measures 9.40 x 6.00 x 2.40 inches (L x W x H) and weighs 0.18 lb.

Q: Can I use a generic SAS/SATA cable instead of the 4X97A80415?

A: This is not recommended. The SR650 V2 uses a modular, platform-specific backplane architecture. Generic cables may not match the connector layout, routing geometry, or backplane management requirements of the SR650 V2 BP3 position. Use the correct Lenovo option part.

Q: Is the 4X97A80415 a field-replaceable unit (FRU)?

A: Based on available evidence, the 4X97A80415 is sold as a Lenovo option part suitable for field installation and server upgrades. Confirm FRU status and service procedures with Lenovo's SR650 V2 maintenance documentation.

Eden Phillips

When I spec storage expansions on the ThinkSystem SR650 V2, the 4X97A80415 is the cable that covers the BP3 front backplane position for 2.5-inch drive bays — it is not a universal SAS cable, and that specificity matters when you are working inside a chassis where every connector and routing path is platform-defined.

Technical Highlights:

• SAS + SATA Dual Protocol: A single cable covers both drive types at the BP3 position, so you are not locked into one storage tier at planning time — enterprise SAS for IOPS-critical workloads or high-density SATA for cost-sensitive archive are both valid downstream choices without a cable swap.
• Precise Chassis Fit: At 9.40 x 6.00 x 2.40 inches and 0.18 lb, the 4X97A80415 is pre-formed for the SR650 V2 chassis geometry — correct cable management without bending connectors or improvising routing paths.
• Platform Specificity: The SR650 V2 backplane architecture uses matched option parts per position; this cable is not transferable to adjacent SR650 generations or other ThinkSystem models without Lenovo parts verification.

Deployment Considerations:

• Before ordering, confirm the BP3 backplane position is present in your specific SR650 V2 chassis configuration — not all SR650 V2 builds include all three front backplane positions; reference Lenovo's SR650 V2 parts matrix or the server's maintenance manual.
• Evidence for this part is limited to distribution-feed structured attributes; connector pinout, cable length, and backplane management compatibility should be confirmed against Lenovo's official SR650 V2 documentation before installation in a production system.

The 4X97A80415 is most relevant as a field-service replacement or incremental storage expansion part for SR650 V2 deployments in enterprise data center and edge rack environments where maintaining platform-matched internal cabling is a service requirement.