Lenovo
SKU: 4Z57A80610
Overview
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Overview
Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.
The Lenovo 4M17A80601 is a mechanical bracket kit designed to install a 4x3.5-inch simple-swap HBA backplane into the ThinkSystem SR250 server platform with an X40 drive configuration. If you're expanding storage density on an SR250 — or replacing a damaged bracket assembly during a field repair — this is the OEM part that maintains proper backplane alignment and drive bay integrity. Having the correct bracket matters: misaligned backplanes create intermittent SAS/SATA signal errors that are difficult to diagnose under load.
Designed for the Lenovo ThinkSystem SR250 1U rack server in a 4x3.5-inch simple-swap drive bay configuration paired with an X40 HBA. Verify your SR250 chassis generation and storage bay configuration before ordering — the SR250 supports multiple storage backplane configurations (2.5-inch and 3.5-inch variants), and bracket geometry differs between them. This kit is specific to the 4x3.5-inch simple-swap (SS) HBA backplane topology; it is not interchangeable with hot-swap (HS) or 2.5-inch backplane bracket kits for the same chassis. If you are configuring a network video recorder or storage server for a surveillance deployment, confirm the SR250 storage SKU against Lenovo's SR250 configuration guide before adding this bracket to your build.
This bracket kit is a mechanical assembly component — installation requires partial disassembly of the SR250 chassis to seat and secure the backplane bracket. Use Lenovo's SR250 hardware maintenance manual torque specifications for all chassis fasteners; over-torquing sheet-metal standoffs in 1U enclosures can strip threads and compromise grounding continuity. Ensure the HBA card and backplane signal/power cables are fully disconnected before repositioning the bracket. No special tooling beyond a standard Torx/Phillips set is required, but confirm screw sizes against the SR250 service guide before disassembly.
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more Lenovo products? Shop the full Lenovo catalog →
Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.
Fixed scope • Fixed price