Middle Atlantic RLNK-915R 9-Outlet 15A Rackmount PDU with Per-Outlet Control

The Middle Atlantic RLNK-915R is a 1U rackmount power distribution unit built for AV, security, and IT rack installations that need individual outlet-level switching without scaling up to a full enterprise IPDU. Nine controlled outlets on a single 15A circuit, managed through the RackLink platform — it keeps every powered device in the rack reachable for remote reboot or scheduled cycling without requiring a technician on site. If you're deploying NVRs, network switches, or access control servers in a remote IDF or security closet, the RLNK-915R addresses the most common service call: the device that needs a power cycle.

Key Features

• 9 Individually Controlled Outlets on a Single 15A Circuit: Eight outlets carry individual switching control (Outlet Control Type: 8) while all nine are distributed across one 15A circuit — enough headroom for a mixed rack of network gear, NVRs, and access control panels without requiring a 20A dedicated circuit. Individual control means you reboot one device without disrupting the rest of the rack.
• RackLink Networked Management: The RLNK-915R integrates with Middle Atlantic's RackLink management ecosystem, giving you remote per-outlet on/off control, outlet scheduling, and power event logging over the network. For security integrators managing multiple remote sites, this eliminates truck rolls for simple power-cycle service calls.
• 9 ft (2.7 m) Cord with NEMA 5-15P Plug: The 9-foot IEC cord with a standard 5-15P plug reaches most rack-adjacent wall outlets or in-rack power sources without extension cords. If your rack is more than 9 feet from the closest circuit, plan accordingly — there's no longer-cord option baked in.
• Basic Surge Protection: Surge protection is present but rated at the basic tier — appropriate for installations on a clean, conditioned circuit or downstream of a UPS. Do not rely on this unit as your primary surge defense in environments with unstable utility power; pair it with a UPS for full protection.
• 1U Rackmount Form Factor (17.36 in W × 1.74 in H × 9.67 in D): At 1.74 inches tall, the RLNK-915R occupies a single rack unit. The 9.67-inch depth fits comfortably in shallow 2-post open-frame racks as well as standard 4-post enclosures, leaving rear cable management space intact.
• Powder-Coat Steel Construction: The powder-coat finish over steel gives the unit durability appropriate for commercial rack environments and resists corrosion in conditioned equipment rooms.
• Shipping Weight 8.5 lbs (3.9 kg): Solid enough to stay put in a rack without additional anchoring, light enough to be a one-person install. No specialized lifting equipment needed.
• Not TAA Compliant: This unit is NOT TAA compliant. If your project is funded through a federal contract or requires TAA-compliant hardware, this model does not qualify — select a TAA-rated PDU from the same family before spec'ing it into a government bid.

Integration & Compatibility

The RLNK-915R is designed for the Middle Atlantic RackLink management platform, which supports integration with control systems commonly used in security and AV rack builds. The unit's NEMA 5-15P plug works with any standard 15A North American branch circuit — no special wiring required. It is not rated for international use and is not available internationally, so deployments outside North America require a different model.

For rackmount power distribution in a security rack, pair this unit with an appropriately sized UPS for ride-through and surge suppression upstream. Downstream, it's well-suited to power NVRs, managed network switches, IP access control panels, and similar loads that benefit from remote outlet cycling. Consult a rack power planning guide when sizing total connected load — 15A at 80% NEC continuous load rating means 12A available for continuous draw across all nine outlets.

Frequently Asked Questions

Q: How many outlets does the RLNK-915R have, and how many are individually controllable?

A: The RLNK-915R has 9 total outlets. Eight of those outlets have individual switching control (Outlet Control Type: 8), allowing you to power-cycle or schedule each device independently.

Q: What plug type does the RLNK-915R use, and what circuit is required?

A: It uses a NEMA 5-15P plug — a standard North American 15A plug. A standard 15A branch circuit is all that's required. No 20A circuit or special wiring is needed.

Q: Is the RLNK-915R TAA compliant for government projects?

A: No. The RLNK-915R is not TAA compliant. It cannot be specified on federal contracts or projects requiring TAA-compliant hardware.

Q: Can the RLNK-915R be used internationally?

A: No. This unit is not available internationally and is not rated for use outside North America. International deployments require a different model.

Q: What type of surge protection does the RLNK-915R provide?

A: The RLNK-915R includes basic surge protection. It is not a substitute for a UPS or a dedicated surge suppressor in environments with unstable utility power. For full protection, deploy it downstream of a UPS.

Q: What are the rack space and depth requirements for the RLNK-915R?

A: The unit occupies 1U (1.74 in height) and measures 17.36 in wide by 9.67 in deep. It fits standard 19-inch rack rails and is compatible with shallow 2-post and standard 4-post rack enclosures.