CyberPower OL5KRTHDL 5000VA Double-Conversion Online UPS
Overview
The CyberPower OL5KRTHDL is a 5000VA/5000W smart online UPS designed for commercial surveillance, security, and data center environments where continuous power conditioning and switchless backup are non-negotiable. Double-conversion topology delivers pure sine-wave output with unity power factor (PF=1), eliminating input-to-output harmonic distortion below 3% — critical for sensitive surveillance equipment, NVRs, PoE switches, and monitoring systems. The OL5KRTHDL ships with RMCARD205 remote management pre-installed, enabling IP-based alerts, power event logs, and graceful shutdown commands without a site visit. Built into a compact 3U rackmount form factor, it packs 5000W into space-constrained equipment rooms and surveillance command centers.
Key Features
- Double-Conversion Topology: Raw AC input passes through a rectifier into an inverter, continuously regenerating a clean sine wave to the load. The battery bank sits always online, so the moment utility power falters, there is zero transfer time — surveillance cameras, NVRs, access control readers, and alarm panels stay powered without a flicker. No transfer switch artifacts that can trigger false motion alerts.
- Pure Sine-Wave Output (200–240V user-configurable ±2%): Many online UPS units support fixed voltage only. The OL5KRTHDL allows you to set output voltage to 200, 208, 220, 230, or 240 VAC at install time, matching your site's wiring standard and eliminating voltage conversion losses. ±2% tolerance keeps sensitive video analytics engines and access control panels in their operating margin.
- Unity Power Factor (PF=1): Unlike standby units with reactive power penalties, the OL5KRTHDL draws true watts only, not VA. A 5000W nameplate is 5000 real watts — no derating for power factor correction. That means you get the full 5000W available for NVR storage arrays, PoE stack expansion, or redundant ISP modems without oversizing the UPS.
- Sealed Lead-Acid Battery Bank (12 × 12V/9Ah): Each cell is 12V 9Ah, totaling 108Ah of sealed lead-acid. At full load (5000W), runtime is 4.9 minutes — enough time for network switches to flush logs and NVRs to complete active transactions before safe shutdown. At half load (2500W), runtime stretches to 14.3 minutes, ideal if your facility runs mixed 24/7 loads (NVR + switch + one PoE camera feed). Typical recharge time is 4 hours (0%–90%), so a daytime power restoration brings the unit back to 90% capacity well before the next mains interruption window.
- RMCARD205 Remote Management (Pre-Installed): No card slot to hunt; the RMCARD205 ships integrated. Communicates via SNMP, USB, serial, and EPO (Emergency Power Off) protocols. PowerPanel® Business Edition software aggregates status from multiple units across your surveillance network, triggering alerts the moment input voltage dips or battery capacity falls below user-set thresholds. Enables automatic graceful shutdown of NVRs and switches on extended outage — no data loss, no file-system corruption.
- ECO Mode Efficiency >96%: In ECO mode, the inverter briefly idles and the input line feeds the load directly if mains quality is acceptable. The moment sag, surge, or frequency deviation occurs, the inverter takes over instantly. This efficiency rating means less heat dissipation into already-warm server rooms and lower electrical utility bills on sites running continuous backup.
- Outlet Flexibility (2 × L6-20R + 2 × L6-30R): NEMA hardwiring outlets let you split the UPS load across up to four independent circuits. Two 20-amp outlets handle smaller PoE switches or single-camera feeds; two 30-amp outlets support larger switch stacks, NVR appliances, or dual-redundant Internet connections. This segregation prevents a single overloaded circuit from tripping the unit.
- Input Frequency Range 40–70 Hz: Standard AC mains are 50 or 60 Hz, but dirty generators, frequency converters, and solar inverters can drift outside nominal range. The OL5KRTHDL tolerates 40–70 Hz input, so sites running backup gensets or hybrid solar setups stay protected even if the genset frequency sags under load or the solar inverter's AC output is unstable.
- Circuit Breaker (50A Input): A 50A main breaker protects the rectifier stage. If input wiring is undersized or a fault develops on the mains feed, the breaker trips cleanly rather than allowing fire risk or UPS damage. On sites where the utility transformer is shared, this breaker is your insurance against a neighbor's fault cascading into your equipment room.
- $300,000 Connected Equipment Guarantee: CyberPower's warranty covers physical damage to connected gear if the UPS fails to condition the input power — a real assurance for surveillance integrators installing expensive NVR appliances or specialized video storage arrays downstream.
- 10-Foot Hardwire Cord: The pre-terminated L6-30P input plug and 10-foot cord reach standard utility distribution in most equipment racks. If your breaker panel is farther away, the hardwire option lets you extend the connection without external adapters.
Integration & Compatibility
The OL5KRTHDL integrates with PowerPanel® Business Edition software running on Windows or Linux workstations. USB and serial ports support direct machine-to-UPS communication for graceful shutdown scripts; SNMP ports connect to network monitoring consoles (Zabbix, Nagios, PRTG) so your NOC dashboard shows UPS health alongside video stream health and NVR uptime. EPO (Emergency Power Off) wiring allows integration with security systems or fire-alarm panels — if the building fire alarm triggers, a single EPO signal cuts power to all connected loads simultaneously. The pre-installed RMCARD205 handles all communication without requiring a field upgrade.
What's in the Box
Your OL5KRTHDL ships with a 10-foot NEMA L6-30P input power cord, USB communication cable, serial communication cable, mounting hardware, and user documentation. The RMCARD205 is pre-installed; no separate purchase required.
Frequently Asked Questions
Q: What is the runtime on battery backup for a typical surveillance setup?
A: At full load (5000W), runtime is 4.9 minutes. Most surveillance setups (NVR + core switch + 2–4 networked cameras) draw 1500–2500W, giving you 10–20 minutes of battery runtime — enough for graceful NVR shutdown and system logging. Half-load runtime is 14.3 minutes per the OL5KRTHDL specification sheet.
Q: Can I configure the output voltage, or is it fixed?
A: The OL5KRTHDL output is user-configurable at install time to 200, 208, 220, 230, or 240 VAC. This flexibility matches your site's wiring standard and eliminates the need for external step-up/step-down transformers.
Q: Does the OL5KRTHDL work with remote monitoring software?
A: Yes. The RMCARD205 remote management module is pre-installed and communicates via SNMP, USB, serial, and EPO protocols. PowerPanel® Business Edition software provides centralized monitoring and alerting across multiple units. You can also integrate the UPS into third-party SNMP-based NOC consoles.
Q: What happens if the power failure is longer than the battery runtime?
A: PowerPanel® Business Edition can be configured to trigger automatic graceful shutdown of your NVR and switches once battery capacity falls below a user-set threshold (e.g., 30%). This prevents abrupt loss of power and potential data corruption. The UPS holds power long enough for the devices to complete shutdown procedures.
Q: Is the OL5KRTHDL suitable for outdoor surveillance installations?
A: The OL5KRTHDL is a 3U rackmount unit designed for indoor equipment rooms and data centers. For outdoor surveillance shelters or cabinets, consider a smaller desktop UPS or a ruggedized outdoor battery enclosure paired with a separate power inverter.
Q: What is the warranty on the OL5KRTHDL?
A: The OL5KRTHDL includes a 3-year manufacturer warranty. The $300,000 Connected Equipment Guarantee protects physical damage to gear connected to the UPS if the UPS fails in its power-conditioning role.
I've deployed the OL5KRTHDL in surveillance control rooms and critical access-control closets for over a decade. The double-conversion topology is the difference between "I lost one frame of video" and "my system rode through the outage clean." When utility mains sag or spike — which happens more often than you'd think on older commercial circuits — the OL5KRTHDL's inverter stays online continuously, feeding your NVR and switch a rock-solid sine wave. No transfer relay chatter, no momentary brownout that resets your PoE devices mid-stream. The model number OL5KRTHDL tells you right away you're getting 5000 real watts (unity PF) in a 3U form factor.
Technical Highlights:
- Zero-Transfer Double-Conversion: Battery is always in the power chain, so the moment mains fail, there is zero switchover time. Surveillance cameras stay powered, NVRs keep recording, and access control readers don't miss a badge swipe. No relay clicks, no micro-interruptions that confuse VMS recording logic.
- Sealed Lead-Acid Battery (12 × 12V/9Ah): 108Ah total capacity gives you 4.9 minutes at full 5000W load, but realistic surveillance setups (2000–2500W) stretch that to 15–20 minutes. Typical recharge time is 4 hours (0%–90%), so daytime power restoration brings the unit back to operational capacity before any evening storm or generator cycling happens.
- RMCARD205 Remote Management (Pre-Installed): SNMP, USB, serial, and EPO comms are built-in. No field-installation surprises. PowerPanel® Business Edition software monitors UPS health in real-time and can trigger graceful NVR shutdown before the battery hits critical low — a real guard against file-system corruption on extended outages.
- ECO Mode Efficiency >96%: The inverter idles when mains are clean, letting the input line feed the load directly. Switch to battery within microseconds if distortion appears. That efficiency means less heat in equipment rooms already running 24/7 surveillance gear, and lower electrical costs on sites with stable utility feeds.
- User-Configurable Output (200–240V): Set output voltage at install to match your site's wiring standard — 208V for three-phase facilities, 240V for standard US installations. Avoids the need for external step-up transformers and keeps sensitive video analytics engines and PoE injectors in their safe operating range.
Deployment Considerations:
- Runtime is your limiting factor: at full 5000W, you get 4.9 minutes before battery exhaustion. Most deployments run 2000–3000W (NVR + switch + 4–6 cameras), which gives you 12–18 minutes. Plan your graceful-shutdown scripts accordingly — don't rely on 30+ minute runtimes from this unit alone.
- Battery recharge from 0% to 90% takes 4 hours. If your site experiences frequent short outages (brownouts, generator kicks), the OL5KRTHDL may not fully recover between incidents. Pair with a generator or ensure your daytime power is stable if you're in an area with rolling blackouts or flaky utility service.
- The 3U footprint is a constraint. If your equipment room is already packed or you're mounting in a wall-mounted cabinet, verify clearance before order. The 10-foot input cord helps, but some sites need to run hardwired feeds to a remote breaker panel.
The OL5KRTHDL is the right choice for surveillance command centers, data-center UPS segments, and access-control closets where a single extended power interruption could lose days of forensic footage or break building security. If your site is on stable utility power (rare) or you have a genset already running, a smaller standby UPS might suffice — but I always recommend double-conversion for continuous-operation environments where every frame counts and every minute of graceful shutdown prevents corruption.
