Intercom Mounts
Showing Results for Intercom Mounts
-
Code Blue
SKU: 40622
Code Blue 40622 OCM Side Mount SBL CC
- Side-mount bracket enables vertical surface installation where front-entry won't work.
- Compatible with Code Blue paging amplifiers operating on 12–24V DC power supplies.
- Secure component alignment simplifies cable management in wall and pole deployments.
$1,420.00 $1,218.99 Save $201.01The item has been added -
Code Blue
SKU: 40777
Code Blue 40777 Dual Curb Mount GBK
- Dual anchor points distribute load across curb width, resisting wind and impact forces.
- Wired RJ45 Ethernet backbone eliminates wireless dropout risk on dedicated emergency networks.
- PoE power delivery simplifies installation by reducing dedicated electrical runs to the unit.
$1,090.00 $943.99 Save $146.01The item has been added -
Code Blue
SKU: 41462
Code Blue 41462 Curb Mount GBK
- Curb-level positioning keeps emergency stations visible to pedestrians and responders.
- Wired Ethernet backbone eliminates wireless dependency for consistent, always-on uptime.
- PoE power delivery simplifies installation by reducing dedicated electrical runs to the unit.
$790.00 $683.99 Save $106.01The item has been added -
Code Blue
SKU: 41577
Code Blue 41577 Dual Curb Mount IP2500/Centry CC
- Mounts two IP2500 or Centry CC units simultaneously for dual-angle coverage.
- Curb-optimized design eliminates need for poles or wall brackets at site edges.
- Weather-resistant steel construction handles UV, rain, and salt-air environments.
$1,420.00 $1,229.99 Save $190.01The item has been added -
Code Blue
SKU: CB1E00491
Code Blue CB1E00491 Paging Amplifier Wall Mount
- Wall-mount bracket secures CB1e series paging amplifiers in permanent installations.
- 24V DC power supply delivers stable, on-board power without a separate PSU.
- Network-compatible design supports both standalone and networked paging deployments.
$5,500.00 $4,715.99 Save $784.01The item has been added -
Hanwha
SKU: SBC-165W
Hanwha SBC-165W White Door Cover for TID-600R
White polycarbonate door cover for TID-600R intercom with weather & impact protection
- Precision-fit design for TID-600R video intercom installations
- Polycarbonate construction resists weathering, dust, and impact damage
- Clean white finish integrates with modern and traditional building aesthetics
$23.00 $13.99 Save $9.01The item has been added -
Hanwha
SKU: SBD-110GPA
Hanwha SBD-110GPA Installation Kit for Mobile Cameras
Mount kit for Hanwha 5MP mobile IR cameras with M12 adapter
- Aluminum mount plate with white finish fits wall or ceiling install
- M12 to RJ45 adapter converts camera connector to standard network jack
- Works with TNV-C8014RM and TNV-C8034RM 5MP mobile IR flat cameras
$85.00 $54.99 Save $30.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBS-165TM
Hanwha SBS-165TM Tilt Mount for TID-600R
Adjustable tilt mount for TID-600R intercom with polycarbonate durability
- Tilt mechanism positions intercom at optimal angle for any entry point
- Polycarbonate construction resists impact and UV degradation outdoors
- Compact 35g mount operates -30°C to +55°C in 0–100% humidity environments
In stock · Ships same business day$32.00 $19.99 Save $12.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBV-121WCW
Hanwha SBV-121WCW Polycarbonate Weather Cap
UV-stabilized polycarbonate weather cap for outdoor IP cameras
- Polycarbonate weather cap for Hanwha outdoor cameras
- UV-stabilized material resists yellowing 3-5+ years
- Built for southern and equatorial outdoor deployment
In stock · Ships same business day$31.00 $19.99 Save $11.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBV-140WCBW
Hanwha SBV-140WCBW Weather Cap
Weather cap for TNV-C8011RW panoramic camera; UV-resistant polycarbonate
- UV-resistant polycarbonate weather cap for outdoor cameras
- Material maintains clarity over 5+ years in outdoor service
- Shields optics and housing from rain and dust
In stock · Ships same business day$31.00 $19.99 Save $11.01The item has been added -
Hikvision
SKU: DS-K7PEB
Hikvision DS-K7PEB Emergency Break Glass Button
Compact fireproof emergency exit button with flexible relay outputs
- NO/NC/COM contact options integrate with most access control systems
- Operates -10°C to 55°C in up to 95% humidity for reliable performance
- Sandblast-finish housing 86×86×50mm fits standard exit door cutouts
$59.99The item has been added -
Hikvision
SKU: DS-KAB02
Hikvision DS-KAB02 Protective Shield
Stainless steel shield for DS-KV8X02-IM intercom camera, -30°C to +70°C
- SUS201 stainless steel construction resists corrosion in outdoor/indoor environments
- Compact wall-mount design (193 × 106 × 80 mm) protects camera without obstructing view
- Rated -30°C to +70°C for year-round reliability in demanding weather conditions
$73.99The item has been added -
Hikvision
SKU: DS-KAB671-B
Hikvision DS-KAB671-B Floor Stand for DS-K1T671 Series
Ergonomic floor stand for DS-K1T671 access terminals, 52.8" height
- Cold-rolled steel construction resists bending under repeated daily use
- 52.8-inch height positions camera at eye level for accurate face recognition
- Compact 3.9" × 8.9" base fits tight entry vestibules and lobby checkpoints
In stock · Ships same business day$391.00 $263.99 Save $127.01 -
Hikvision
SKU: DS-KABV9503-RS
Hikvision DS-KABV9503-RS Protective Shield
Weatherproof steel shield for outdoor intercoms, -40°C to 60°C
- SECC electroplated steel construction resists corrosion and vandalism
- Compact 188.69 × 97 × 49.06 mm form fits standard Hikvision models
- Tool-free installation with transparent design for full device visibility
$46.99The item has been added
Intercom Mounts
Intercom mounts and brackets provide secure, professional installation for door stations and communication devices. Select mounting hardware that aligns with your surface type, weather exposure, and installation angle requirements.
Plan Your Deployment
- Surface type (flush, surface, masonry, metal, glass)
- Indoor vs outdoor weather exposure rating
- Angled mounting for accessibility and camera alignment
- Compatibility with specific intercom models
- ADA and installation compliance considerations
Intercom Mounts — Engineering-Grade Commercial Security for Commercial Deployments
This category covers 69 working models of intercom mounts sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility with your existing infrastructure is the first decision. Verify the part numbers, voltage requirements, mounting patterns, and software/firmware compatibility against the rest of your system before ordering. Cross-brand substitutions sometimes work; the most common installation rework comes from skipping that verification step under time pressure.
Environmental rating drives material and installation choice. Indoor and outdoor units have very different ingress-protection requirements. Industrial environments add temperature, vibration, and chemical-exposure considerations. Spec the right environment rating up front — derated or mismatched hardware looks cheaper at purchase but fails early in service.
Integration with adjacent systems matters more than spec-sheet feature lists. ONVIF, OSDP, SIP, and various vendor APIs each enable different cross-system workflows. Confirm the integration paths required for your end-to-end use case before locking in any individual component; the cheapest component in isolation often forces the most expensive integration work downstream.
Total cost of ownership includes installation labor, warranty horizon, software/firmware update commitments, and consumables. Hardware with 5-year warranties and free firmware updates typically outlives cheaper alternatives that hit end-of-life within 3 years. For commercial installs that will operate for a decade, the lifecycle of the manufacturer's product line matters as much as the unit's spec.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP |
| Connectivity | Wi-Fi |
| Power | PoE, AC/DC |
| Type | Accessory, Box, Intercom |
| Durability | Indoor/Outdoor |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
How do I confirm compatibility with my existing system?
Match the manufacturer and model line against your existing equipment's datasheets and compatibility lists. For mixed-vendor installations, verify against documented integration paths (ONVIF, OSDP, SIP, vendor APIs) rather than assuming a generic standard covers the use case. Our Senior Specialists can help with compatibility verification before purchase — sending the existing equipment model numbers prevents the most common ordering errors.
What's the typical lead time?
Most items in stock ship the same business day from our warehouse. Items showing 'special order' typically ship in 2-3 weeks direct from the manufacturer or channel-direct US distribution. For project planning, confirm stock status before finalizing a project schedule; manufacturer back-orders on specialty hardware can extend beyond 4-6 weeks during supply-chain disruptions.
Do you offer volume pricing?
Yes. For quantities above typical single-deployment counts, contact a Senior Specialist for project pricing. We work with manufacturer-direct sourcing for many lines, which gives us pricing flexibility on larger orders. Build the project quantity from your bill-of-materials and request quote pricing — line-item discounts often combine for meaningful project savings.
What warranty applies?
Manufacturer warranty terms vary by product line. Most cameras, recorders, and access control hardware carry 3-5 year manufacturer warranties; accessories typically carry 1-2 years. Specific terms are listed on each product page when published by the manufacturer. We handle the warranty processing for items purchased through us, including advance-replacement when the manufacturer offers that option.
Can I get help with system design?
Yes — talk to a Senior Specialist before ordering for any non-trivial system. We work with commercial installers on design verification, parts-list completeness, and compatibility checks. The conversation typically saves project labor on the back end by catching missing parts and incompatible substitutions during procurement instead of mid-install. Direct line 877-277-7147 or use the contact form.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.