Hikvision DS-KAB671-B Floor Stand for DS-K1T671 Series
The DS-KAB671-B is a dedicated floor stand engineered to elevate access control terminals from the Hikvision DS-K1T671 family to ergonomic user height. Built from SPCC (cold-rolled commercial steel), this stand delivers stable positioning for face recognition, card-based access, and time-tracking workflows without requiring wall cutouts or ceiling modifications. At 14.77 lbs, it remains portable enough for relocation or temporary deployment while maintaining rigid support during daily multiuser interaction.
Key Features
- SPCC Steel Construction: Cold-rolled commercial-grade steel resists bending and warping under repeated user contact. In warehouse or manufacturing environments where dozens of personnel touch the terminal daily, this translates to years of straight, stable alignment without sagging.
- 52.8-Inch Height Positioning: Elevates the DS-K1T671 terminal to a natural eye and hand level for average adult users. Reduces neck strain and improves face-recognition enrollment accuracy by placing the camera lens at typical interaction distance—critical for high-volume onboarding or shift-change scenarios.
- Compact Footprint (3.9" × 8.9" base): The narrow base occupies minimal floor space, making it suitable for entry vestibules, office lobbies, or warehouse checkpoints where real estate is tight. Does not obstruct traffic flow or require dedicated corners.
- Lightweight at 14.77 lbs: Portable enough that a single technician can move the stand between locations without additional equipment or labor. Useful for temporary access points or facilities testing terminal placement before permanent installation.
- Seamless DS-K1T671 Integration: Engineered specifically for DS-K1T671M, DS-K1T671MF, and DS-K1T671TM-3XF models. No adapters, no custom mounting plates—the stand and terminal mate directly. Simplifies spare-parts inventory and reduces deployment time.
- Indoor Environment Rating: Suitable for climate-controlled buildings. Not intended for outdoor, wet, or high-humidity areas—bypass this stand if your terminal will face direct rain, temperature swings, or saltwater spray.
Integration and Compatibility
The DS-KAB671-B (often searched as DS KAB671 B) mounts without tools or special hardware. Its design assumes a standard concrete or tile floor; ensure your installation surface is level to within 1/4 inch across the stand's footprint to prevent wobbling. The stand does not include cable management trays or wire guides—budget separately if you need to route Ethernet and power cables away from high-traffic areas. Compatible exclusively with the three DS-K1T671 variants listed above; it will not fit other Hikvision terminal generations or third-party devices.
What's in the Box
- 1 × Hikvision DS-KAB671-B Floor Stand
Frequently Asked Questions
Q: Can the DS-KAB671-B be used outdoors?
A: No. The stand is rated for indoor environments only. SPCC steel will rust if exposed to rain, humidity, or salt air. For outdoor terminals, consult Hikvision's weatherproofed enclosure options or wall-mount solutions.
Q: What floor types will the stand work on?
A: Concrete, tile, and sealed wood floors work well. Carpeted areas are not recommended—the stand's base can shift or settle unevenly on soft surfaces, creating wobble. If carpeted installation is mandatory, place a rigid plywood or metal plate underneath.
Q: Will the DS-KAB671-B fit other Hikvision terminal models?
A: No. This stand is designed for DS-K1T671M, DS-K1T671MF, and DS-K1T671TM-3XF only. Using it with other models risks improper weight distribution or mounting misalignment.
Q: How do I route cables to the terminal?
A: The stand itself does not include cable trays or grommets. You will need to manage Ethernet and power cables separately—either run them along the base perimeter, use external conduit, or bundle them with adhesive clips to avoid trip hazards.
Q: Is assembly required?
A: No. The DS-KAB671-B ships fully assembled. Mount the compatible terminal to the top plate and position on your installation floor. Total deployment time: under 5 minutes.
Q: Can the stand be relocated after installation?
A: Yes. Because it is freestanding, you can move it to a new location without tools or wall repairs. Check the floor for level before repositioning to ensure stability.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The DS-KAB671-B is a straightforward accessory, but don't underestimate its deployment impact. A 52.8-inch stand puts your DS-K1T671 terminal at the right ergonomic height—face-recognition enrollment and card-swipe interactions happen at natural eye and hand level. In high-throughput access points (shift changes, visitor check-ins), this eliminates user strain and reduces face-capture failures caused by poor camera angles. SPCC steel construction resists the repeated impacts of daily multiuser contact; it won't develop play or wobble after months in a busy warehouse or manufacturing floor.
Technical Highlights:
- SPCC Cold-Rolled Steel: Commercial-grade steel resists bending under continuous user interaction. No coating or paint specified in the datasheet, so expect surface rust exposure over 3–5 years if deployed in high-humidity indoor spaces (print rooms, kitchens, washdown areas). Indoor-only rating is non-negotiable.
- 14.77 lbs Portable Weight: Light enough for one technician to relocate, yet rigid enough to handle dozens of daily touches without sagging. Useful for A/B testing terminal placement or temporary site deployments before committing to wall-mount or ceiling-mount solutions.
- Compact 3.9" × 8.9" Base Footprint: Takes up minimal floor space—critical in cramped vestibules or single-lane checkpoints. Does not obstruct emergency exits or create trip hazards if positioned correctly.
Deployment Considerations:
- Floor levelness matters. Uneven concrete or tile will cause the stand to rock, degrading the user experience and potentially causing enrollment failures if the camera shifts between captures. Use a level before committing to a permanent location.
- Cable routing is your responsibility. The stand ships with no conduit, wire guides, or cable trays. You'll need to manage Ethernet and power separately—either adhesive clips along the base or a separate under-floor or wall-mounted channel. Budget 1–2 additional hours for neat installation in visible traffic areas.
- Indoor-only rating is absolute. Avoid lobbies with overhead skylights, parking structures, or any space where moisture or temperature extremes are likely. SPCC will corrode rapidly in those conditions.
Best suited for controlled-environment access checkpoints—office building lobbies, warehouse punch clocks, manufacturing floor gates—where the terminal stays dry and users require ergonomic interaction. Not a fit for outdoor vestibules, vehicle drop-offs, or sites with seasonal humidity swings.
