Panduit Industrial NET 8PT Rail Mount COP Panel

Panduit CDPP8RG 8-Port DIN Rail Copper Patch Panel

Overview

The Panduit CDPP8RG is an 8-port Panduit IndustrialNet copper patch panel designed for DIN rail deployment — the right choice when you need structured cabling termination inside an industrial enclosure or control cabinet rather than a traditional 19-inch rack. Built from high-impact polycarbonate and engineered to snap onto a standard 35mm DIN rail, the CDPP8RG keeps copper patch points organized in the same enclosure as your PLCs, switches, and other rail-mounted equipment.

Where conventional patch panels demand rack space and flat-panel mounting, this unit clips directly to IEC 60715 and DIN EN 60715 compatible rails — a practical difference on factory floors, utility closets, and transit installations where every rack unit counts and vibration resistance matters more than front-panel aesthetics.

Key Features

• Standard 35mm DIN Rail Mount: Adjustable locking tabs let the CDPP8RG snap securely onto any IEC 60715 / DIN EN 60715 / DIN EN 50022 compliant rail. No rack, no tools beyond a flathead — install time measured in seconds, not minutes.
• Universal Mini-Com Module Compatibility: All 8 ports accept any single-slot Mini-Com module, giving you full flexibility to mix Cat6A, Cat6, fiber, or specialty keystone inserts in a single panel. Swap modules in the field without replacing the housing.
• High-Impact Polycarbonate Construction: Rated to IEC 60068 environmental standards, this housing handles the vibration, temperature cycling, and humidity swings common in manufacturing and industrial environments — without the weight or corrosion risk of a metal chassis.
• Panel Securing Screws Included: Integrated screw provisions hold module blanks and populated keystone inserts firmly in place under vibration, preventing the creep or pop-out failures that occur on snap-only designs in high-vibration settings.
• Ultimate ID Labeling System: Each port ships with Ultimate ID labels and clear label covers — port identification is immediate and permanent without a separate label printer or aftermarket label kit.
• cULus Listed, RoHS Compliant: Carries cULus listing per UL1863 and meets RoHS requirements, satisfying the compliance checkboxes most facility managers and system integrators need for sign-off in North American commercial and industrial projects.
• Compact Footprint (6.62 in H × 2.65 in W): At 168.1mm tall and 67.3mm wide, the CDPP8RG fits inside standard DIN rail enclosures without dominating available rail length — leaves room for adjacent terminal blocks, breakers, or switches on the same rail segment.

Integration & Compatibility

The CDPP8RG integrates into any structured cabling deployment using Panduit Mini-Com single-slot modules. It is compatible with standard 35mm DIN rails meeting IEC 60715, DIN EN 60715, DIN EN 50022, DIN 46277-3, and BS 5584:1978. Because it accepts any Mini-Com single-slot keystone, it works alongside network switches and other panel-mount equipment in the same enclosure. Color is gray, matching typical industrial enclosure interiors. Carton quantity is 10 units; package quantity is 1.

Frequently Asked Questions

Q: What DIN rail sizes does the CDPP8RG fit?

A: The CDPP8RG mounts on a standard 35mm DIN rail. It meets IEC 60715, DIN EN 60715, DIN EN 50022, DIN 46277-3, and BS 5584:1978 rail standards.

Q: Which keystone modules are compatible with the CDPP8RG?

A: Any Panduit Mini-Com module that occupies a single slot is compatible. This covers copper Cat5e/Cat6/Cat6A jacks, fiber modules, and other single-slot Mini-Com inserts.

Q: Is the CDPP8RG RoHS compliant?

A: Yes. The CDPP8RG is RoHS compliant and cULus listed per UL1863.

Q: What are the physical dimensions of the CDPP8RG?

A: Overall height is 6.62 inches (168.1mm); overall width is 2.65 inches (67.3mm).

Q: Does the CDPP8RG include port labeling?

A: Yes. The panel ships with Ultimate ID labels and clear label covers for all 8 ports.

Marty Allison

The CDPP8RG is the panel I spec when a project has copper termination points inside a control cabinet and zero rack space to spare. The 35mm DIN rail mount with adjustable locking tabs means it drops into any IEC 60715-compliant enclosure in under a minute — no rack ears, no cage nuts, no separate mounting bracket.

Technical Highlights:

• Universal Mini-Com Single-Slot Compatibility: All 8 ports take any single-slot Mini-Com insert — mix Cat6A, Cat6, or specialty modules port-by-port without swapping the panel housing.
• High-Impact Polycarbonate to IEC 60068: The housing is rated for the environmental stress cycles (temperature, humidity, vibration) called out in IEC 60068 — meaningfully tougher than the thin ABS you find on budget patch panels that weren't designed for cabinet environments.
• cULus Listed per UL1863: Carries the cULus mark under UL1863, which is the listing most AHJs and facility sign-off checklists require for communications hardware in North American industrial installs.

Deployment Considerations:

• Confirm your DIN rail is 35mm wide and meets at least one of the referenced standards (IEC 60715, DIN EN 50022) before ordering — the locking tab engagement depends on rail profile geometry, not just width.
• The panel is 6.62 inches tall (168.1mm), so account for that vertical clearance on the rail segment; adjacent components need to leave enough room for the locking tab release during install and future module swaps.

Best fit: industrial Ethernet drops inside NEMA enclosures on manufacturing lines, transit signaling cabinets, or any site where copper patch termination needs to share a DIN rail with PLCs and managed switches rather than living in a separate comms rack.