Panduit IURH6X04BL-UG IndustrialNet Cat 6A Copper Cable
Panduit's IURH6X04BL-UG delivers Category 6A performance in a ruggedized U/UTP construction engineered specifically for harsh industrial environments. This 1000-foot reel of 23 AWG solid-conductor cable meets ANSI/TIA-568.2-D Category 6A and ODVA EtherNet/IP standards while providing oil and sunlight resistance that standard office-grade structured cabling cannot survive. When you're pulling cable through manufacturing floors, outdoor conduit runs, or facilities where exposure to cutting oils, hydraulic fluids, and UV degradation is inevitable, the IndustrialNet platform addresses failure modes that would sideline conventional Cat 6A within months of deployment.
Key Features
- Category 6A performance to 500 MHz, supporting 10GBASE-T Ethernet over full 100-meter channel
- 23 AWG solid copper conductors in 4-pair U/UTP (unshielded twisted pair) configuration
- Oil-resistant and sunlight-resistant PVC jacket rated per UL 444 and UL AWM Style 21047
- Dual CMX/CMR flammability rating for flexible installation code compliance
- 600V AWM rating suitable for industrial control and power-limited circuits
- Black jacket for discreet routing in exposed industrial environments
- 1000 ft (305 m) reel length minimizes mid-run splices on typical factory floor drops
- Meets UL 1666 CMR plenum alternative and ODVA EtherNet/IP physical layer requirements
The IndustrialNet IURH6X04BL-UG uses 23 AWG solid bare copper conductors in an unshielded twisted-pair geometry optimized for Category 6A channel performance across the full swept frequency range to 500 MHz. Unlike office environments where cables live in pristine ceiling plenums, industrial Ethernet infrastructure sees direct contact with lubricants, solvents, and continuous UV exposure in skylight-lit facilities or outdoor IDF enclosures. Panduit's oil-resistant PVC jacket formulation resists the plasticizer leaching and jacket embrittlement that degrades standard PVC within 18-36 months of exposure to cutting oils or hydraulic mist. The sunlight-resistant jacket meets UL 444 aging requirements, maintaining mechanical integrity and flame rating through years of direct or reflected UV exposure that would crack and chalk conventional black PVC.
The dual CMX/CMR listing provides installation flexibility across general-purpose (CMX) and riser (CMR) applications without stocking separate SKUs. For integrators running cable vertically between floors in an industrial facility, the CMR rating satisfies NEC 800.113 requirements; for horizontal factory-floor runs in cable tray or conduit, the CMX rating reduces material cost compared to plenum-rated alternatives where plenum rating provides no code benefit. The 600V AWM Style 21047 rating allows this cable to share conduit or tray with Class 1 power-limited circuits under NEC 725.136, eliminating the need for segregated pathways in dense industrial wire runs.
This cable directly addresses ODVA's EtherNet/IP physical layer guidelines for industrial automation networks, where deterministic latency and continuous uptime drive device-level control in packaging lines, robotic cells, and process equipment. The 23 AWG solid conductor provides lower DC loop resistance than 24 AWG alternatives (52.5Ω/1000 ft vs 86Ω/1000 ft per pair), reducing voltage drop on PoE++ (IEEE 802.3bt Type 4) installations that deliver up to 100W to industrial managed switches or I/O blocks at the far end of a 90-meter permanent link. For installations using Panduit's RJ45 Industrial connectors or sealed M12 X-coded field terminators, the solid conductor ensures reliable IDC contact and long-term connection stability under vibration and thermal cycling that would degrade stranded-conductor terminations.
Deploying 1000-foot reels reduces the number of mid-run splices required when pulling cable across large manufacturing floors or between building IDF locations and remote MDF rooms in campus industrial sites. Fewer splices mean fewer points of failure and faster pull times during new construction or retrofit projects. The black jacket provides visual discretion when cable is surface-mounted on machinery frames, routed through open wire basket tray in high-bay facilities, or installed in outdoor conduit runs where aesthetic concerns favor non-bright colors. For integrators supporting Rockwell, Siemens, or Schneider Electric industrial control platforms, this cable provides the physical-layer foundation that allows those systems to deliver on their microsecond-level timing guarantees without physical-layer retransmissions degrading PLC scan times or motion-control loop closure rates.
The IURH6X04BL-UG ships on a 1000 ft reel with Panduit's standard industrial packaging, designed for job-site storage in trailers or on-site material cages where cable may sit for weeks between pull phases. When you need Category 6A performance that survives the mechanical, chemical, and environmental abuse inherent to factory floors, outdoor industrial enclosures, or mixed-use facilities where IT and OT networks converge, Panduit's IndustrialNet platform delivers the ruggedized construction and standards-compliant performance that keeps deterministic Ethernet running through conditions that would fail office-grade structured cabling within the first maintenance cycle.
