Panduit IMLT69S-C6L StrongHold 316L Stainless Steel Standard Cable Tie
Overview
The Panduit IMLT69S-C6L is a standard-length stainless steel cable tie from the Panduit StrongHold line — engineered for environments where nylon or plastic ties fail: corrosive atmospheres, high-heat zones, and outdoor installations exposed to UV and moisture cycles. At 10.2 inches (259mm) in length and 0.25mm thick, this is a purpose-built fastener for bundling cables and wire harnesses in demanding commercial and industrial applications where long-term mechanical integrity is non-negotiable.
The IMLT69S-C6L (often searched as IMLT69S C6L) ships in packs of 100, with 500 units per shipping carton — a quantity structure suited for deployment across large infrastructure projects or restocking a field service inventory.
Key Features
- Type 316L Stainless Steel Construction: 316L-grade stainless adds molybdenum to the alloy, which meaningfully improves resistance to chloride-induced pitting corrosion — the failure mode that ruins standard 304 SS ties in coastal installations, chemical plants, food processing areas, or anywhere salt spray is present. If your cable runs pass through wash-down zones or marine-adjacent spaces, 316L is the correct alloy choice.
- 10.2-inch (259mm) Standard Length: Long enough to handle larger wire bundles, conduit groups, or harnessed cable assemblies without stacking multiple ties. At 0.25mm (0.010 inches) thickness, the strap seats cleanly through tool-applied tensioning heads without deforming on the edge.
- UL Listed — File E56854: The UL listing provides third-party verification that the tie meets recognized safety standards — relevant when documentation is required for as-built records, inspections, or client-facing compliance submittals on commercial projects. Not just a marketing note — check your project spec sheets before substituting unrated ties.
- StrongHold™ Sub-Brand: Panduit's StrongHold designation signals this is positioned as a heavy-duty fastening product within the broader wire management and cable routing category — not a commodity import. The design is consistent with Panduit's commercial-grade manufacturing tolerances.
- 100-Pack Packaging: The per-pack quantity of 100 makes job-site and project-level procurement straightforward. Order quantities scale directly against bundle counts without re-calculating for odd pack sizes. The 500-unit carton quantity is useful context for larger procurement runs.
- Compatible with Panduit Installation Tools: Designed for use with Panduit's GS4MT-E, HTMT, PPTMT, and ST2MT tensioning and cut-off tools. Using the paired tool produces consistent tension, a flush cut on the tail, and eliminates the sharp-tip hazard that manual trimming leaves. If you are already running Panduit tool infrastructure on the job, this tie integrates directly.
- Metallic Finish: The natural stainless steel finish is visually identifiable in as-built inspections and does not degrade, fade, or crack the way UV-exposed nylon ties do over multi-year service life. For exposed cable runs in plant environments, this matters for long-term maintenance visibility.
Integration & Compatibility
The IMLT69S-C6L is designed for use with Panduit's tensioning tool family: the GS4MT-E, HTMT, PPTMT, and ST2MT. These tools apply calibrated tension and cut the strap tail flush, which is important in finished installation environments where protruding tie tails create a cut hazard or fail visual inspection. Cross-reference competitor part AS4229 if you are working from a spec sheet that references that number — the Panduit IMLT69S-C6L is the direct equivalent.
For project environments requiring cable management planning across mixed metallic and non-metallic tie applications, confirm bundle diameter and pull tension requirements against Panduit's application guidance before specifying. The 316L alloy is the appropriate upgrade path from standard 304 SS when chloride exposure is a documented concern in the installation environment.
This tie fits within Panduit's broader StrongHold cable tie family, which includes variants by length, width, and locking mechanism — making it straightforward to standardize on a single supplier for an entire project's fastening BOM.
What's in the Box
- 100x Panduit IMLT69S-C6L StrongHold 316L stainless steel cable ties (10.2 in / 259mm length)
Frequently Asked Questions
Q: What grade of stainless steel is the IMLT69S-C6L made from, and why does it matter?
A: The IMLT69S-C6L uses Type 316L stainless steel. The 'L' designation indicates low carbon content, and the alloy includes molybdenum, which significantly improves resistance to chloride-based corrosion (pitting and crevice corrosion). This makes it the correct choice over standard 304 SS for coastal, marine, food processing, chemical, or wash-down environments where salt or corrosive chemicals are present.
Q: How many ties come in a pack, and what is the carton quantity?
A: Each pack contains 100 cable ties. The shipping carton contains 500 ties (5 packs). This structure supports both single-project and larger volume procurement.
Q: Is the IMLT69S-C6L UL Listed?
A: Yes. The IMLT69S-C6L carries a UL listing under file number E56854. This provides third-party safety verification and supports compliance documentation on commercial and industrial projects requiring listed components.
Q: What Panduit tools are compatible with the IMLT69S-C6L?
A: The IMLT69S-C6L is designed for use with the Panduit GS4MT-E, HTMT, PPTMT, and ST2MT tensioning and cut-off tools. These tools apply consistent tension and produce a flush tail cut, eliminating sharp protrusions and ensuring installation quality on finished work.
Q: Does the IMLT69S-C6L have a competitor cross-reference?
A: Yes. The IMLT69S-C6L is the Panduit equivalent to competitor part number AS4229. If your project specification references AS4229, the IMLT69S-C6L is the direct cross-reference.
Q: What is the length and thickness of the IMLT69S-C6L?
A: The tie is 259mm (10.2 inches) in overall length and 0.25mm (0.010 inches) thick. This standard geometry is suitable for medium-to-large cable bundle diameters in wire management applications.
The IMLT69S-C6L is a detail that gets overlooked on BOM reviews until there is a corrosion callback from the field — and then it becomes the only tie on the approved list. The 316L alloy with its molybdenum addition is a genuine upgrade over commodity stainless for any installation within a mile of saltwater, in food-grade areas subject to CIP chemical cycles, or in industrial environments with chlorine or sulfur compounds in the atmosphere. At 10.2 inches, it covers the bundle diameters you encounter on cable tray runs without needing to daisy-chain shorter ties.
Technical Highlights:
- 316L Alloy: The molybdenum content in 316L directly addresses chloride pitting — the failure mode that causes standard 304 ties to develop surface rust and eventually fracture under cyclic load in wet or chemically active environments. Not a cosmetic spec difference.
- UL Listed E56854: Carries a UL listing by file number, which is the documentation trail that gets you through inspections on commercial projects and satisfies the 'listed components' language in many project specs and AHJ requirements.
- 100-unit pack / 500-unit carton: The pack-of-100 structure matches typical project-level consumption quantities for mid-size cable infrastructure runs without requiring bulk-warehouse ordering minimums. Order exactly what the job needs.
Deployment Considerations:
- Tool pairing matters: the IMLT69S-C6L is engineered for the Panduit GS4MT-E, HTMT, PPTMT, and ST2MT. Running it with an off-brand tensioning tool risks inconsistent strap tension or a non-flush tail cut — both are inspection failures on finished work in data centers or clean commercial installs.
- 316L is the correct spec for chloride exposure, but it is not rated for every aggressive chemical environment. If the installation involves strong acids or specific industrial solvents, verify alloy compatibility against the chemical exposure profile before specifying.
The IMLT69S-C6L is the right specification call for outdoor cable tray runs in coastal or industrial facilities, food and beverage plant cable infrastructure, and any application where a corrosion callback would require retracing finished conduit or tray work — the cost of the upgrade over standard SS is small relative to the cost of a service call two years post-installation.
