Panduit IMLT69H-L6L StrongHold Heavy-Duty 316L Stainless Steel Cable Tie
Overview
The Panduit IMLT69H-L6L is a heavy-duty stainless steel cable tie from the StrongHold™ series, built for wire bundling and cable management in environments where standard nylon ties simply won't hold up. At 259 mm (10.2 inches) in length and 0.25 mm (0.010 inches) thick, these 316L stainless steel ties deliver the corrosion resistance and mechanical strength needed in marine, outdoor, industrial, and harsh-environment installations. If you're routing conduit or cable bundles in coastal facilities, chemical plants, outdoor enclosures, or anywhere with persistent moisture or chemical exposure, this is the hardware-grade fastener to spec. Available in a 50-piece pack (IMLT69H-L6L, often searched as IMLT69H L6L) with a carton quantity of 250, these ties are priced and packaged for project-scale procurement.
Key Features
- 316L Stainless Steel Construction: Type 316L stainless — the "marine grade" alloy — offers significantly better resistance to chloride-induced pitting and crevice corrosion than standard 304 SS. Deploy these where salt spray, humidity, or chemical wash-down are routine. A nylon tie fails invisibly over time; these won't.
- Heavy-Duty Rated: Classified as "heavy" gauge (0.25 mm / 0.010" thickness), these ties handle larger bundle diameters and higher retention forces than standard-duty SS ties. Appropriate for power cable bundles, conduit groups, and structural cable runs — not just light data cabling.
- 10.2-Inch (259 mm) Length: At just over 10 inches, you have enough working length to wrap moderate-to-large bundle diameters or to reach around mounting surfaces with clearance. Verify your bundle diameter against the usable wrap length before ordering — this is the spec that most often gets overlooked when specifying cable ties.
- Metallic Finish: The natural stainless finish means no coating to chip, fade, or contaminate a sterile or food-processing environment. What you see is what the tie is — solid 316L through and through.
- UL Listed (File E56854): UL listing provides third-party verification of performance and safety claims — relevant when your installation must pass inspection or when a client's insurance requires listed hardware. The UL file number (E56854) is traceable and verifiable.
- Competitor Cross-Reference KE0138: Direct cross to competitor part KE0138, so if you're standardizing on a spec that called out that part number, IMLT69H-L6L is the Panduit equivalent without a re-engineering exercise.
- Pack Quantity 50, MOQ 5 Packs: The 50-piece pack size suits medium installations or jobsite stock. The 250-piece carton quantity means bulk orders ship efficiently. Plan quantities against your bundle count — stainless ties are typically single-use (the locking tab deforms on cinch), so order with appropriate buffer.
Integration & Compatibility
The IMLT69H-L6L is designed for use with Panduit cable management tools and accessories including the GS4MT-E, PPTMT, ST2MT, HTMT, and PBTMT installation tools. Using a proper tensioning and cut-off tool (rather than hand-cinching) ensures consistent pull force and a clean tail cut — critical in enclosures where a protruding stainless tail can damage adjacent wiring or injure technicians. If you're working with cable management systems at scale, pairing these ties with the correct Panduit hand tool is the right call. For broader wire routing and protection needs, the full Panduit cable and wire management line includes mounts, raceways, and straps that complement these ties in structured cabling and rack and enclosure builds. When planning a larger installation, review your cable management selection guide to match tie type, length, and material to the environment — stainless is the right call for harsh environments, but overkill (and more expensive) for clean indoor telecom rooms where nylon is sufficient.
What's in the Box
- 50x Panduit IMLT69H-L6L StrongHold™ heavy-duty 316L stainless steel cable ties (259 mm / 10.2 in)
Frequently Asked Questions
Q: What material are the IMLT69H-L6L cable ties made from?
A: These ties are made from Type 316L stainless steel — the low-carbon marine-grade alloy with superior resistance to chloride and chemical corrosion compared to standard 304 stainless.
Q: How many ties come in a package, and what is the minimum order quantity?
A: Each package contains 50 ties. The minimum order quantity (MOQ) is 5 packages (250 ties total), which aligns with the standard carton quantity.
Q: What is the length and thickness of the IMLT69H-L6L?
A: Each tie is 259 mm (10.2 inches) long and 0.25 mm (0.010 inches) thick — classified as heavy-duty gauge within the StrongHold series.
Q: Are these cable ties UL listed?
A: Yes. The IMLT69H-L6L meets UL listing requirements under UL file number E56854, providing third-party verification of performance and safety.
Q: What Panduit tools are compatible with these ties?
A: The IMLT69H-L6L is designed for use with Panduit installation tools including the GS4MT-E, PPTMT, ST2MT, HTMT, and PBTMT — enabling consistent tensioning and clean tail removal.
Q: What competitor part does the IMLT69H-L6L cross-reference to?
A: The IMLT69H-L6L cross-references to competitor part number KE0138, making it a direct Panduit equivalent if your spec sheet or existing inventory references that part.
The IMLT69H-L6L is one of those SKUs that looks unremarkable on a spec sheet until you've had a nylon tie failure in a coastal mechanical room or a food-processing wash-down bay. The 316L alloy isn't marketing — it's the specific low-carbon variant of 316 stainless that resists sensitization during welding and is the standard specification for anything living in chloride-heavy air long-term. At 259 mm and 0.25 mm gauge, this is a working tie for real bundle diameters, not a light-duty data-closet fastener.
Technical Highlights:
- 316L vs. 304 SS: The 'L' designation matters — lower carbon content prevents chromium carbide precipitation at grain boundaries, preserving corrosion resistance in high-humidity and chemical environments where 304 would eventually pit.
- 0.25 mm (0.010 in) Heavy Gauge: Heavier wall means higher loop tensile and bundle retention compared to standard-duty SS ties. Suitable for power cable groups and structural runs, not just instrument or signal cable bundles.
- UL Listed E56854: Traceable UL file means you can pull this up for AHJ review or contractor submittals without relying solely on the manufacturer's datasheet claim.
Deployment Considerations:
- Pair these with a Panduit-compatible tensioning tool (GS4MT-E or equivalent listed in the compatibility data) — hand-cinching 316L ties inconsistently can leave tails that protrude and create laceration risk in enclosures; a proper tool cuts flush and sets repeatable tension.
- Stainless cable ties are single-use by design — the locking tab cold-works when cinched and cannot be re-opened without cutting. Order 10–15% above your bundle count for miscuts and adjustments, especially on first-install teams unfamiliar with the tool.
Best fit for outdoor OSP enclosures, marine or waterfront facility cable runs, industrial process areas with chemical wash-down, and any installation where the client's spec explicitly calls for 316L SS fasteners or a cross to KE0138.
