Panduit IMLT25S-C 5" Stainless Steel Cable Tie 100-Pack

Panduit IMLT25S-C StrongHold™ Stainless Steel Cable Tie

The Panduit IMLT25S-C delivers industrial-grade bundling for outdoor surveillance, solar installations, and corrosive environments where nylon ties degrade in months. This 5-inch Type 304 stainless steel tie with full polymer coating handles cable runs exposed to UV, salt spray, temperature extremes, and chemical wash-down—common on rooftop camera arrays, marine facilities, food processing plants, and petrochemical sites. UL Listed and rated for continuous outdoor use, it solves the maintenance cycle problem: one stainless tie outlasts a dozen nylon replacements, eliminating callback costs and ensuring power/data integrity on mission-critical perimeter systems.

Key Features

• Type 304 stainless steel construction resists corrosion in salt-air, chemical, and high-humidity environments
• Full polymer coating protects cable jackets from abrasion and prevents galvanic reaction with aluminum conduit or cable tray
• 5-inch (127mm) working length accommodates bundled Cat6/fiber/power runs up to 1.5" diameter—typical for 4-6 cable outdoor drops
• 0.010" (0.25mm) band thickness balances flexibility for hand installation with 50 lb loop tensile strength
• UL Listed (File E56854) for plenum and outdoor use, meeting NEC 300.6 corrosion-resistance requirements
• Compatible with Panduit GS4MT-E, HTMT, PPTMT, and ST2MT installation tools for consistent tension without overtightening
• 100-piece contractor pack reduces per-tie cost on large deployments (rooftop arrays, perimeter fence lines, parking structure installs)

Stainless steel cable ties are the mandated choice when building codes require corrosion-resistant fasteners (IBC 1404.3, NEC 300.6) or when insurance inspections flag rusted/degraded tie wraps on outdoor equipment. The IMLT25S-C uses austenitic 304 stainless—the same alloy specified for coastal construction—which forms a passive chromium oxide layer that self-heals when scratched, maintaining integrity through decades of thermal cycling and wet/dry exposure. The full polymer coating (not a dip or spray) encapsulates the entire band surface, preventing the cable jacket cuts and insulation nicks that occur with bare metal edges during pull-through or when cables shift under wind load. This coating also blocks galvanic corrosion when the tie contacts dissimilar metals like aluminum cable tray or galvanized conduit, a failure mode that creates white corrosion powder and loss of clamp force within 18-36 months in uncoated stainless installations.

The 5-inch length is the workhorse size for surveillance and access control trunk runs: it closes around a 1.5" bundle (typically 4× Cat6 + 2× 18/2 power + 1× fiber in outdoor-rated jacket), leaves enough tail for Panduit tool engagement, and provides 50 lb loop tensile strength when properly tensioned—sufficient for vertical cable tray runs and overhead J-hook support spans up to 4 feet per NEC 300.11(A). Installation with Panduit's GS4MT-E hand tool delivers repeatable 18-25 lb tension (the ideal range that secures the bundle without compressing Cat6 below the 0.229" pair-separation spec), then shears the tail flush to eliminate snag points in dense equipment racks. For high-volume jobs—100+ camera retrofit, stadium/arena perimeter hardening, solar farm DC combiner routing—the tool-applied method cuts install time by 60% vs. manual twist-tie or nylon ratchet ties, and the flush cut removes the sharp tail hazard that fails OSHA 1910.269 inspection on utility sites. The metallic finish maintains visibility in cable tray without the UV-fade blackout that makes nylon ties invisible during adds/moves/changes, simplifying maintenance documentation and change tracking on multi-year projects.

UL Listing under File E56854 confirms this tie meets UL 62275 plenum and outdoor cable tie standards, including the 167°F (75°C) continuous-duty temperature rating and the flame-propagation limits required for air-handling spaces and above-deck installations. The 100-piece packaging is optimized for commercial integrators running 20-50 camera projects: it's the right volume for a typical 24-camera building perimeter (averaging 4 ties per home-run), costs 30-40% less per tie than 10-packs sold through electrical distribution, and ships in a resealable bag that survives jobsite tool bags and service truck storage without spillage. For datacenter, industrial control, and transportation infrastructure projects where cable tie failure can trigger costly unplanned downtime or create NEC 110.12 "workmanship" deficiencies during AHJ inspection, the IMLT25S-C's stainless construction and Panduit's ISO 9001-certified manufacturing consistency provide the material traceability and performance documentation that risk-management and warranty programs require.