i-PRO

i-PRO · MX-O-SMA-TS-R079

i-PRO MX-O-SMA-TS-R079 Thermal Sensor - 45 Deg FOV

Thermal sensor module for the MOBOTIX S16 multi-sensor camera platform, configured with a 45-degree field of view

• VOx microbolometer enables reliable detection in low-light and obscured conditions.
• 45° FOV suits medium-range perimeter monitoring with useful area coverage per module.
• Field-swappable into S16 body—no cable pulls or camera replacement required.

i-PRO · MC-7610

i-PRO MC-7610 Keyfob

When you're deploying proximity-based access control for clients who need straightforward credential management without the complexity of smart

• 125 kHz passive RFID needs no batteries, eliminating credential maintenance overhead.
• Compatible with Schlage AD-400/NDE and HID readers for broad ecosystem deployment.
• NDAA-compliant keyfob suits bulk credentialing of contractors and shift workers.

i-PRO · MC-UPG-A-900

i-PRO Reader: R10/RP10 Iclass/multiclass - MC-UPG-A-900

When you need to add iClass or multiclass credential support to existing i-PRO R10 or RP10 reader installations, replacing entire hardware isn't

• Converts R10/RP10 readers to iCLASS SE/Multiclass without rewiring or panel changes.
• Supports 13.56 MHz smart card and 125 kHz prox in one reader for mixed-credential sites.
• NDAA-compliant field upgrade rated –30°C to +65°C with Wiegand, RS-485, and OSDP output.

i-PRO · MC-75-B100C4D8PE

i-PRO Powersupply: - MC-75-B100C4D8PE

75 W LifeSafety Power FPO75-class access-control supply for small-to-medium door counts

• 75 W FPO75-class output supports small door counts without over-provisioning space.
• Selectable 12/24 VDC output and SLA battery charging simplify multi-door deployments.
• Individually fused channels plus AC-fail and tamper outputs enable panel-level monitoring.

i-PRO · MC-T3MK77F16SMC

i-PRO Altronix T3MK77F16 KIT Consists OF - MC-T3MK77F16SMC

When deploying i-PRO camera systems that require precise power management and mounting infrastructure, sourcing compatible components individually

• Single SKU bundles Altronix power and mounting components for T3MK77F16 deployments.
• Pre-matched components eliminate compatibility risk across multi-camera i-PRO installations.
• Reduces procurement cycles and on-site delays by consolidating verified component sets.

i-PRO · MC-5365-EKP00

i-PRO MC-5365-EKP00 Prox

When you're deploying access control across multiple facilities with varying panel manufacturers, you need proximity readers that speak universal

• 125 kHz proximity reads standard prox cards and fobs at 2–4 inch range.
• 26-bit Wiegand output integrates with virtually any access control panel.
• 18-inch pigtail and mullion-mount form factor speed rough-in on narrow frames.

i-PRO · MC-PIM400-1501-LC

i-PRO MC-PIM400-1501-LC Panel Interface Module

• Extends I/O capacity for door hardware, sensors, and readers without new cable runs.
• Integrates legacy wired readers into i-PRO IP-based access control for unified management.
• Compact form factor fits space-constrained equipment closets and door frame enclosures.

i-PRO · MC-150/250-3D8P2-1

i-PRO Powersupply: - MC-150/250-3D8P2-1

When deploying i-PRO camera systems across multi-building campuses or distributed locations, maintaining consistent power delivery becomes critical

• Eight individually fused 12V DC/24V AC outputs consolidate power for up to 8 devices.
• 250W capacity at 10A supports full i-PRO MC-150/250 series deployments from one unit.
• Enclosed cabinet form factor rack-mounts cleanly alongside switches and NVRs in IDFs.

i-PRO · MC-BL3

i-PRO BL3 Battery Leads - MC-BL3

Battery backup installations fail when connections compromise system reliability

• Pre-terminated 18-inch leads eliminate field stripping and reduce wiring errors.
• 18AWG conductors handle current demands of 12V/24V sealed lead-acid batteries.
• Red jacket enables instant polarity identification during install and maintenance.

i-PRO · MC-150-B100C8D8-1

i-PRO 150W Powersupply - MC-150-B100C8D8-1

When you're deploying multi-camera installations with PTZ units, high-resolution encoders, or edge recording devices, inconsistent power delivery

• 150W continuous output supports PTZ motors and multi-camera loads without voltage sag.
• Over-current and short-circuit protection prevents downstream equipment damage on faults.
• Compact form factor integrates cleanly into equipment closets, racks, or enclosures.

i-PRO · MC-921PTNNEK00000

i-PRO MC-921PTNNEK00000 Kpd Std

When your access control deployment requires credential flexibility without sacrificing security, single-technology readers create unnecessary

• Reads 125 kHz prox and 13.56 MHz iCLASS SE/MIFARE in one device, eliminating reader swaps during migration.
• Wiegand, RS-485, and OSDP outputs ensure compatibility with virtually all commercial access control panels.
• Rated –30°C to +65°C with NDAA compliance, supporting exterior installs in regulated federal environments.

i-PRO · WVQ204/2S

i-PRO Mounting Bracket for WJ-GXE500 & WJ-GXD400 (2 - WVQ204/2S

i-PRO · IPS-SRV-UDE-12TB-A

I-pro UDE Hybrid Server/storagefor T3 - IPS-SRV-UDE-12TB-A

Tier 3 UDE (Unified Data Environment) hybrid appliance with 12 TB of recording storage

• Pre-loaded UDE stack unifies body-worn, in-car, and fixed-camera ingest on one chassis.
• 12 TB hybrid storage supports Tier 3 retention with chain-of-custody and audit logging built in.
• Cybersecurity-hardened image and H.265 hardware decode suit agency network deployment requirements.

i-PRO · MC-75-D8PE4M-1

i-PRO MC-75-D8PE4M-1 75W

N FPO75-D8PE4M 75 W LifeSafety Power access-control supply, configured for small-to-medium door counts

• 75 W output right-sizes power for small door counts without over-provisioning.
• Selectable 12/24 VDC output with individually fused channels protects each device.
• Battery-charging circuit and AC-fail output support monitored, backed-up operation.

i-PRO · WVCW504S/22

i-PRO Super Dynamic 5 Vandal-resistant Fixed - WVCW504S/22

5MP vandal-resistant fixed dome designed for indoor high-risk environments where physical impact is an operational certainty—retail floors subject to

• 5MP (2560×1920) at 30fps supports facial ID at 6–10 ft without excess bitrate.
• IK08/IP66 ratings handle direct impact and dust or high-pressure water ingress.
• ONVIF compliance integrates with existing VMS platforms; ceiling or wall mountable.

i-PRO · IPS-LIS-1-4TB

I-pro Legacy Interface Server Unit Includes 1X - IPS-LIS-1-4TB

Legacy Interface Server with 4 TB of storage, designed to bridge legacy i-PRO / Panasonic recording systems to the current evidence-management

• 4 TB of onboard storage keeps moderate legacy archives accessible during migration.
• Bridges older i-PRO/Panasonic recording systems to the current evidence-management platform.
• Rack-mount appliance form factor integrates cleanly into existing IT infrastructure.

i-PRO · WVLZA61/2S

i-PRO WVLZA61/2S 1/3 Varifocal Zoom Lens

Varifocal zoom lens engineered for 1/3-inch interline transfer CCD camera systems

• Varifocal zoom eliminates fixed-lens swaps, cutting commissioning time on multi-zone sites.
• Matched to 1/3-inch CCD at 768×494 NTSC for aberration-free imaging across the full zoom range.
• Rated –10 °C to +50 °C with IR/Day-Night support for continuous dusk-to-dawn operation.

i-PRO · MC-7410

I-Pro Credential: 7410 Proximity Card Clamshell - MC-7410

When you're deploying or expanding a proximity-based access control system, credential compatibility and durability determine long-term operational

• 125 kHz proximity technology ensures compatibility with legacy and current readers.
• Clamshell form factor resists bending and antenna breaks in high-wear deployments.
• Slot-punch ready design supports lanyard or badge reel attachment out of the box.

i-PRO · WVCS584

i-PRO WVCS584 Super Dynamic 6 650 TVL Analog Camera

650 TVL analog surveillance dome built for hybrid analog-IP facilities and legacy coaxial infrastructure

• Super Dynamic 6 WDR (128×–160× range) eliminates iris adjustments in mixed-light scenes.
• 36× optical zoom with 256 presets and 400°/s pan speed reduces camera count on large sites.
• Coaxial-native 650 TVL output integrates directly with existing DVRs and Pelco P/D systems.

i-PRO · IPS-CLR-SYNC-1Y

i-PRO Automatically Generate Cases IN - IPS-CLR-SYNC-1Y

When security events pile up across multiple i-PRO cameras and recorders, manually correlating footage into actionable case files drains

• Automates case file assembly from alarm and analytics triggers across i-PRO networks.
• One-year subscription delivers continuous evidence sync and chain-of-custody tracking.
• Consolidates clips, metadata, and timestamps from multi-site cameras into export-ready packages.