i-PRO products
-
i-PRO
SKU: WJ-NX200/6000T3
i-PRO WJ-NX200/6000T3 9-Channel 6TB NVR
- Dual 3TB drives in RAID 1 deliver 6TB protected storage for 9-channel 24/7 recording.
- H.265 compression reduces storage consumption ~40–50% compared to H.264 across all channels.
- ONVIF compliance enables mixed-vendor camera integration without proprietary lock-in.
$2,039.00 $1,612.99 Save $426.01The item has been added -
i-PRO
SKU: WJ-NX200/3000T3
i-PRO WJ-NX200/3000T3 9-Channel 3TB NVR
- Ships with 3TB HDD pre-installed, supporting 24/7 recording across all 9 channels.
- H.265 compression reduces storage consumption ~40–60% versus H.264 for longer retention.
- ONVIF Profile S compatibility allows integration with any compliant IP camera brand.
$1,723.00 $1,362.99 Save $360.01The item has been added -
i-PRO
SKU: WJ-NX200/12000T6
i-PRO WJ-NX200/12000T6 9-Channel 12TB NVR
- Dual 6TB drives in RAID1 deliver 12TB fault-tolerant storage out of the box.
- 384 Mbps total throughput sustains concurrent 4K recording and live playback.
- FIPS 140-2 Level 1 certification with pre-installed device certificates eases compliance.
$3,367.13 $2,294.99 Save $1,072.14The item has been added -
i-PRO
SKU: WJ-HXE400/54000T6
i-PRO WJ-HXE400/54000T6 54TB 6TBx9 Hard Disk Extension Unit
- 54TB (9×6TB) in one housing extends NVR retention without adding rack units.
- Plug-and-play with WJ-NVR and WJ-NV series — no complex array configuration on-site.
- Rack-mountable, 0–40°C rated housing suits standard climate-controlled IDF/server rooms.
$12,207.18 $8,617.99 Save $3,589.19The item has been added -
i-PRO
SKU: WJ-HXE400/36000T4
i-PRO WJ-HXE400/36000T4 36TB 4TBx9 Hard Disk Extension Unit
- 36TB raw capacity across nine 4TB Panasonic HDDs scales retention for 16+ camera sites.
- Pre-validated Panasonic drives ensure firmware alignment and reduce compatibility troubleshooting.
- Rack-mountable 19-inch form factor with active cooling suits continuous data-center deployments.
$9,537.23 $6,733.99 Save $2,803.24The item has been added -
i-PRO
SKU: WJ-GXE500
i-PRO WJ-GXE500 4-Channel Video Encoder
- Streams H.264 or JPEG at up to 30 fps per channel across all 4 analog inputs.
- PoE 802.3af eliminates separate DC supply; three units stack into a single 1U rack.
- ONVIF Profile S output integrates with Genetec, Milestone, and Avigilon VMS platforms.
$954.44 $747.99 Save $206.45The item has been added -
i-PRO
SKU: PWM40
i-PRO PWM40 Silver Wall Mount
- Silver wall mount provides a clean, professional finish for indoor deployments.
- Compatible with various i-PRO camera models, reducing SKU complexity on mixed installs.
- Note: PWM40 is discontinued — verify availability before specifying for new projects.
$81.03 $57.99 Save $23.04The item has been added -
i-PRO
SKU: PS485S
i-PRO PS485S Pantone Gray Outdoor Pendant Shroud
- Pantone Gray finish integrates discreetly into modern outdoor architectural settings.
- Weather-resistant materials protect pendant-mounted cameras from rain, UV, and dust.
- Compatible with standard outdoor pendant mounting systems for straightforward installation.
$37.99The item has been added -
i-PRO
SKU: PRCM1
i-PRO PRCM1 Universal Recessed Ceiling Mount Bracket
- Recessed ceiling design keeps camera body and hardware hidden within the ceiling void.
- Fits standard drop-ceiling grid systems with 15 mm or 24 mm T-bar spacing.
- Compatible exclusively with i-PRO WV-SC384, WV-SC385, and WV-SW Series cameras.
$168.61 $118.99 Save $49.62The item has been added -
i-PRO
SKU: PPM485S
i-PRO PPM485S Pantone Gray Pole Mount Kit
- Mounts i-PRO surveillance cameras securely to poles of varying diameters.
- Pantone Gray finish blends with professional architectural environments.
- Durable construction supports both indoor and outdoor deployment conditions.
$199.99The item has been added -
i-PRO
SKU: PLM12MP120/10
i-PRO PLM12MP120/10 1/3" 12mm F1.8 Evetar M12-Mount Megapixel
- F1.8 aperture admits ~77% more light than F2.8, improving low-light image quality.
- 12mm focal length on 1/3" sensor delivers ~31° horizontal FOV for mid-range coverage.
- 10-pack format ensures consistent optics across multi-camera deployments on i-PRO cameras.
$225.33 $158.99 Save $66.34The item has been added -
i-PRO
SKU: PLAMP2808A
i-PRO PLAMP2808A 1/2.7" 2.8-8mm F1.2 Tamron Auto Iris Varifocal
- F1.2 aperture maintains sharp exposure across shifting indoor and transitional lighting.
- 2.8–8mm varifocal range lets you reframe coverage without swapping lenses on the camera.
- Auto DC iris on C-mount fits 1/2.7" i-PRO sensor bodies; verify 4/5-pin connector before install.
$229.99The item has been added -
i-PRO
SKU: PLAMP2406
i-PRO PLAMP2406 1/3" 2.4-6mm F1.2 Tamron Auto Iris Varifocal Lens
- F1.2 aperture gathers 4× more light than F2.0, supporting low-light deployment without IR.
- 2.4–6mm varifocal range lets you dial in FOV post-install without repositioning the camera.
- Motorized auto iris maintains consistent exposure across day-night and backlit transitions.
$178.71 $126.99 Save $51.72The item has been added -
i-PRO
SKU: PLAMP0850A
i-PRO PLAMP0850A 1/2.7" 8-50mm F1.6 Tamron Auto Iris Varifocal
- F1.6 aperture with auto iris adapts exposure automatically across bright and low-light scenes.
- 8–50mm varifocal range supports 3MP coverage from wide-area floors to narrow corridor zoom.
- 1/2.7" sensor format matches i-PRO varifocal-generation cameras; verify mount and iris interface before ordering.
$359.99The item has been added -
i-PRO
SKU: PCM485S
i-PRO PCM485S Pantone Gray Corner Mount Kit
- Corner-mount geometry maximizes camera coverage and reduces blind spots.
- Pantone Gray finish integrates unobtrusively across varied architectural environments.
- Compatible with a wide range of i-PRO surveillance cameras for flexible deployment.
$311.91 $225.99 Save $85.92The item has been added -
i-PRO
SKU: PCM484S
i-PRO Panasonic PCM484S Corner Mount Kit Beige
- 90° corner bracket consolidates two mounts into one point, cutting cable runs and labor.
- Heavy-duty aluminum with powder-coat finish suits high-tamper and corrosion-prone environments.
- Dual-surface load distribution reduces fastener stress vs. single-point wall mounting.
$432.32 $336.99 Save $95.33The item has been added -
i-PRO
SKU: PAPM4GR
i-PRO PAPM4GR Cool Gray Pole Mount Adaptor
- Mounts i-PRO surveillance cameras securely to poles for flexible field placement.
- Cool gray finish blends into most architectural environments, reducing visual impact.
- Rigid mounting mechanism minimizes camera vibration to maintain stable image capture.
$89.99The item has been added -
i-PRO
SKU: PACA4GR
i-PRO PACA4GR Cool Gray Corner Mount Adapter
- Corner-specific geometry delivers full 90° coverage at building corners without awkward angling.
- Supports wall, pole, corner, and rack mounting for flexible deployment across varied structures.
- Cool gray finish integrates cleanly into standard commercial and industrial interior environments.
$164.28 $115.99 Save $48.29The item has been added -
i-PRO
SKU: MR-MRAANTIVIBWMP
i-PRO Panasonic MR-MRAANTIVIBWMP 3-Axis Anti-Vibration/Shock Kit
- 3-axis elastomeric isolators attenuate vibration vertically, laterally, and longitudinally.
- Shock absorption prevents camera misalignment and connector loosening in high-impact sites.
- Designed for i-PRO cameras deployed on vehicles, bridges, and industrial equipment.
$464.00 $312.99 Save $151.01The item has been added -
i-PRO
SKU: MR-MRAANTIVIB
i-PRO Panasonic MR-MRAANTIVIB 3-Axis Anti-Vibration/Shock Kit
- 3-axis isolation blocks vibration transfer across all planes for stable image capture.
- Absorbs mechanical shock and impact stress, protecting camera sensors and mounts.
- Compatible with standard bracket configurations for indoor and outdoor deployments.
$271.44 $183.99 Save $87.45The item has been added
