APC by Schneider Electric FS-AC-5006-B 42-52U Rack Blanking Panel 600mm
Overview
The APC by Schneider Electric FS-AC-5006-B is a rack blanking panel engineered specifically for Hyperpod-series 42U to 52U enclosures with a 600mm width profile. If you're managing airflow in a high-density rack environment, empty rack units are one of the fastest ways to undermine your hot-aisle/cold-aisle containment strategy — recirculating hot exhaust back to the intake side of servers and switches. This panel closes those gaps, forcing cooled air through the equipment rather than around it. At 667mm tall and 84mm deep, the FS-AC-5006-B is dimensioned to fill the open bay precisely in compatible Hyperpod racks without shimming or modification. The black finish (product colour: Black) matches the standard APC Hyperpod rack palette, keeping the installation visually consistent. This is a purpose-built rack enclosure accessory — not a universal blank — so verify rack model compatibility before ordering.
Key Features
- Targeted 42–52U Hyperpod Fit: Designed for APC Hyperpod rack configurations in the 42U to 52U range. A blanking panel that doesn't match the rack's internal geometry will gap or bow; the FS-AC-5006-B is dimensioned for a flush, secure fit in compatible enclosures — no improvised cuts or adapter brackets needed.
- 667mm Height Profile: At 667mm tall, this panel covers a substantial vertical run of open rack space in a single install. That's practical in retrofit scenarios where multiple adjacent empty units need to be sealed quickly without stacking several smaller 1U or 2U blanks.
- 84mm Depth: The 84mm depth is matched to the Hyperpod rack's internal frame depth, ensuring the panel seats fully without protruding into cable management channels or interfering with adjacent equipment's rear connectors.
- cUL, CE, and UL Certifications: Carrying cUL, CE, and UL certifications means the FS-AC-5006-B meets North American and European safety standards. For enterprise data centers and colocation facilities that require certified components throughout the rack — not just the active equipment — this matters during audits and compliance reviews.
- 600mm Rack Width Compatibility: The 2217mm package depth and 84mm package width confirm this ships in a form factor matched to 600mm-wide rack infrastructure. Standard 19-inch racks and 600mm-wide APC Hyperpod frames are the target; do not order this for 800mm or non-Hyperpod enclosures.
- Black Finish: Matches the standard APC Hyperpod black interior. Cosmetically consistent racks matter in customer-facing data rooms, colocation facilities, and security operations centers where presentation is part of the service.
- Package Weight 13kg: At 13kg packaged, this is not a lightweight single-piece blank — the panel is built with the material weight consistent with a structural Hyperpod accessory. Factor this into freight planning if ordering multiple units for a full-rack refresh.
Integration & Compatibility
The FS-AC-5006-B is positioned within the APC by Schneider Electric Hyperpod accessory line. It is designed for Hyperpod rack enclosures in the 42–52U size class with a 600mm width. If your installation uses 800mm-wide racks or non-Hyperpod APC enclosures, this panel will not fit correctly — check the Hyperpod frame specification before procurement. For facilities deploying a mix of active and passive rack components, pairing blanking panels with structured rack cable management and a dedicated UPS and power distribution strategy ensures that airflow improvements from blanking translate into measurable thermal gains. Certifications (cUL, CE, UL) support deployment in regulated environments including financial data centers, healthcare IT rooms, and government infrastructure where component-level certification documentation is required.
Frequently Asked Questions
Q: What rack models is the FS-AC-5006-B compatible with?
A: The FS-AC-5006-B is designed for APC Hyperpod rack enclosures in the 42U to 52U range with a 600mm width profile. It is not a universal blanking panel — verify your specific Hyperpod model number against APC's compatibility documentation before ordering.
Q: What certifications does the FS-AC-5006-B carry?
A: The FS-AC-5006-B is certified to cUL, CE, and UL standards, supporting deployment in facilities that require certified components throughout the rack infrastructure.
Q: What is the warranty on the FS-AC-5006-B?
A: APC provides a 1-year manufacturer warranty on the FS-AC-5006-B.
Q: Can the FS-AC-5006-B be used in 800mm-wide racks?
A: No. The FS-AC-5006-B is dimensioned for 600mm-wide Hyperpod enclosures. Installing it in an 800mm rack will result in a poor fit and gaps that defeat its airflow-management purpose.
Q: Why does rack blanking matter for thermal management?
A: Open rack units allow hot exhaust air from servers to recirculate back to equipment intakes, raising inlet temperatures and reducing cooling efficiency. Blanking panels like the FS-AC-5006-B physically block that recirculation path, maintaining the integrity of hot-aisle/cold-aisle containment.
Q: What is the height of the FS-AC-5006-B panel?
A: The panel measures 667mm tall, allowing it to cover a significant vertical span of open rack space in a single install — useful in retrofit scenarios with multiple adjacent empty units.
The FS-AC-5006-B is a dimension-specific accessory — at 667mm tall and 84mm deep, it's built to the Hyperpod frame profile, not to a generic rack standard. I've seen facilities try to substitute universal blanks in Hyperpod racks and end up with visible airflow gaps at the top and bottom edges. That defeats the entire point. If you're in a Hyperpod 42–52U / 600mm environment, this is the correct part; if you're not, it isn't.
Technical Highlights:
- 667mm Panel Height: Covers a large contiguous open bay in a single piece — fewer seams means fewer potential air bypass paths compared to stacking multiple smaller blanks.
- cUL / CE / UL Certification: All three marks on one SKU covers North American (UL, cUL) and European (CE) regulatory requirements simultaneously — useful when one rack build ships to multiple regions or when a colocation audit requires component-level certification records.
- 13kg Packaged Weight: Heavier than typical thin-plastic blanks, which is consistent with a structural Hyperpod accessory rather than a light snap-in filler. Factor shipping weight when ordering quantities for a full rack refresh.
Deployment Considerations:
- Confirm your Hyperpod rack is in the 42–52U class and 600mm wide before ordering — the FS-AC-5006-B is not adjustable and will not retrofit to 800mm frames or non-Hyperpod APC enclosures.
- The 2217mm package depth listed in specs is the packaged dimension, not the installed depth (installed depth is 84mm) — plan storage and receiving accordingly if taking delivery of multiple units.
The FS-AC-5006-B is the right call for enterprise data centers and colocation deployments standardized on APC Hyperpod infrastructure where thermal containment compliance and certified components are both requirements — not afterthoughts.
