HPE S4P01A ANW Central DL360 G11 HW APP

HPE S4P01A ANW Central DL360 G11 Hardware Appliance

The HPE S4P01A is a hardware appliance built on the ProLiant DL360 Gen11 platform, pre-configured for Aruba Networking Central (ANW Central) network video and surveillance management workloads. Weighing in at 39.11 lb, this is a rack-mounted server unit — not a camera or peripheral device — intended for organizations that need a dedicated, purpose-built host for centralized video or network management rather than deploying software onto general-purpose infrastructure.

Because the S4P01A ships as an integrated hardware-plus-application bundle, it eliminates the OS tuning, driver compatibility, and sizing guesswork that comes with a bring-your-own-server approach. The DL360 Gen11 chassis is HPE's standard 1U dual-socket rack platform, widely deployed in data centers and IT closets, so your facilities team will recognize the form factor and your spare-parts process applies directly.

Key Features

• Purpose-Built Appliance Packaging: The S4P01A arrives as a validated hardware-software bundle. Deploying ANW Central on a pre-qualified server removes the risk of under-provisioning compute or running into OS-level incompatibilities — a common time sink when teams try to self-provision surveillance management hosts.
• ProLiant DL360 Gen11 Platform: The DL360 G11 is a 1U rack server with a well-established support ecosystem — standard HPE iLO remote management, broad data-center toolchain compatibility, and a known hardware lifecycle. That matters for long-term surveillance deployments where the management host needs to outlast camera refresh cycles.
• 39.11 lb Rack Unit: At 39.11 lb, this unit is heavier than a thin edge appliance — plan for a standard 2-person rack installation and verify your rack's weight capacity before committing a mounting position. It ships from Mexico (country of origin: MX), which is relevant for any TAA or domestic-sourcing procurement checks.
• UNSPSC 43211502 Classification: Classified under UNSPSC code 43211502 (computer servers), confirming this is a server-class device — not a NVR consumer appliance. Procurement teams using commodity codes for purchase-order routing should note this classification.

Integration and Compatibility

The S4P01A is designed for environments already standardized on HPE infrastructure and Aruba Networking Central. As a network video management appliance, it targets IT and physical security teams that want a single-vendor support path from server hardware through the management application layer. Organizations evaluating surveillance server appliances should confirm ANW Central licensing terms and supported camera counts with HPE directly, as those details are outside the scope of the hardware SKU specification. If your environment runs a third-party VMS, review the VMS compatibility requirements before specifying this appliance — ANW Central is HPE's platform, and cross-VMS support is not implied by the hardware alone.

Frequently Asked Questions

Q: What is the HPE S4P01A?

A: The S4P01A is an HPE hardware appliance based on the ProLiant DL360 Gen11 server platform, pre-configured for Aruba Networking Central (ANW Central) surveillance and network video management workloads.

Q: Is the S4P01A a camera or a server?

A: It is a server-class hardware appliance — UNSPSC code 43211502 (computer servers) — not a camera or NVR peripheral. It hosts the ANW Central management application.

Q: What is the weight of the S4P01A?

A: The S4P01A weighs 39.11 lb. Plan for a two-person rack installation and verify rack weight capacity before mounting.

Q: Where is the S4P01A manufactured?

A: Country of origin is Mexico (MX). This is relevant for TAA compliance or domestic-sourcing procurement requirements — verify with HPE for current TAA status on this SKU.

Q: Does the S4P01A require separate ANW Central licensing?

A: Licensing terms are defined by HPE separately from the hardware SKU. Confirm current ANW Central license requirements with HPE or your procurement channel before ordering.

Eden Phillips

The S4P01A stands out in procurement conversations primarily because of what it is NOT: it is not a camera, not a standalone NVR, and not a software license. It is a 39.11 lb ProLiant DL360 Gen11 rack server pre-loaded for ANW Central — and that distinction matters when you are budgeting rack space, power draw, and support contracts for a multi-site surveillance management rollout.

Technical Highlights:

• DL360 Gen11 Foundation: The 1U DL360 platform brings HPE iLO remote management out of the box — useful when the appliance lives in a remote equipment room and you need out-of-band access without dispatching a technician.
• 39.11 lb Unit Weight: Heavier than a typical 1U server suggests this unit ships fully populated (drives, PSUs). Confirm rack load ratings before scheduling installation — most 2-post open-frame racks are not rated for this weight class.
• MX Country of Origin: Mexico-origin hardware passes most North American procurement screens, but TAA-specific contracts require SKU-level verification with HPE. Do not assume TAA compliance without confirming on the current HPE product brief for S4P01A.

Deployment Considerations:

• Treat this as a data-center-class server installation: redundant power feeds, dedicated VLAN for management traffic, and iLO network access configured before the unit goes into a locked rack.
• ANW Central licensing is separate from the hardware SKU — a common gotcha at PO stage. Get the license SKU confirmed before this unit ships to avoid a deployment hold.

The S4P01A fits best in enterprise physical security deployments where IT already runs HPE ProLiant infrastructure and wants a single-vendor support path for the ANW Central management tier — not for small-site deployments where a software-only or edge-NVR approach is more cost-effective.