HPE P92540-005 ProLiant DL360 Gen12 1U Rack Server
Overview
The HPE ProLiant DL360 Gen12 P92540-005 is a dense 1U rack server configured for compute-intensive workloads that demand processor performance, large memory footprints, and redundant power — including video management systems, network recording infrastructure, and enterprise security platforms. This specific build ships with a single Intel Xeon Gold 6505P at 2.2GHz across 12 cores, 128GB of registered DDR memory across four slots, eight Small Form Factor drive bays, the HPE MR408i-O Gen12 storage controller, and two 800W redundant power supplies. At 67.70 lb, it's a fully configured server-class platform, not a stripped chassis — rack and rail planning should account for that weight before deployment.
The DL360 Gen12 sits in HPE's mainstream 1U compute line — designed for organizations that need a proven rack density without moving to blade or composable infrastructure. The P92540-005 configuration targets deployments where a single-processor server with solid memory capacity and internal storage flexibility is the right call, rather than a dual-socket build with underutilized sockets.
Key Features
- Intel Xeon Gold 6505P, 2.2GHz, 12-core: The 6505P is a single-socket-optimized processor — 12 real cores at 2.2GHz base gives you consistent throughput on workloads that don't parallelize well across dozens of threads. For VMS platforms running concurrent decode streams or analytics pipelines, this matters more than raw core count on a lower-clocked part.
- 128GB DDR RAM (4× 32GB): Four registered DIMMs populate the memory subsystem at 128GB total. For a video management server running 32–64 camera streams with active motion analytics, that headroom prevents the OS from swapping under peak recording load. If you anticipate scaling to larger channel counts, verify how many DIMM slots the DL360 Gen12 platform exposes before committing to this config.
- 8 SFF Drive Bays: Eight Small Form Factor bays give you the flexibility to configure RAID 5, RAID 6, or RAID 10 arrays using 2.5-inch SAS or SATA drives (including SSDs). For 30-day retention across a 64-camera VMS deployment, you'll want to calculate storage requirements before purchasing drives — the bay count is the ceiling, not the solution.
- HPE MR408i-O Gen12 RAID Controller: The MR408i-O is HPE's Gen12 OCP-form-factor RAID controller, supporting RAID 0, 1, 5, 6, 10, 50, and 60. Offloading RAID parity calculations to a dedicated controller rather than the host CPU frees Xeon cores for application workloads — meaningful on a VMS server where simultaneous recording, playback, and export can compete for compute.
- Dual 800W Redundant Power Supplies: Two 800W PSUs in a redundant configuration mean a failed power supply is a hot-swap maintenance event, not an unplanned outage. For 24/7 security recording infrastructure, eliminating single points of failure in the power path is non-negotiable — this config ships with that covered.
- 1U Form Factor (DL360 Gen12): One rack unit means you can densely stack these in a security operations rack without consuming space that might be needed for NVR appliances, network switches, or UPS units. The 67.70 lb ship weight reflects a fully populated unit — confirm your rack rails and cable management can handle it before installation.
- Single-Processor Platform: This is a 1P (single-processor) build. If your VMS vendor's licensing is per-socket, you pay for one socket. If your workload scales linearly with core count and you need more than 12 cores, evaluate whether a 2P variant in the DL360 Gen12 family or a move to the DL380 Gen12 footprint makes more sense before purchasing.
Integration and Compatibility
The HPE ProLiant DL360 Gen12 (P92540-005, often searched as P92540 005) is a standard x86 server platform and runs any major VMS software that supports Windows Server or Linux — including Milestone XProtect, Genetec Security Center, Axis Camera Station Pro, Hanwha Wisenet WAVE, and similar enterprise platforms. Confirm your VMS vendor's hardware compatibility list and minimum server specifications against this configuration before provisioning, as channel counts and analytics features drive memory and storage requirements that vary by platform.
The MR408i-O controller is an OCP 3.0 form-factor card integrated into the Gen12 platform — it is not a standalone PCIe card you can swap to a different server. If your storage architecture requires specific HBA or RAID cards, verify compatibility with HPE's Smart Array or MegaRAID ecosystem documentation before specifying this unit. For deployments integrating with network switching infrastructure or NVR appliances in the same rack, the DL360's 1U footprint keeps rack density manageable.
Organizations evaluating server-based VMS platforms alongside purpose-built network video recorders should weigh the flexibility of a general-purpose server (OS choice, software licensing, expandability) against the simpler provisioning of a pre-loaded NVR appliance. The DL360 Gen12 wins when you need the server to do more than record — analytics processing, integration middleware, or multi-application hosting on a single chassis. For more on matching server specs to recording infrastructure, see our surveillance server category. The broader HPE compute line includes additional DL360 and DL380 configurations if this specific build doesn't match your channel or storage requirements.
Frequently Asked Questions
Q: What is the processor in the HPE P92540-005?
A: The P92540-005 ships with a single Intel Xeon Gold 6505P running at 2.2GHz with 12 cores.
Q: How much RAM does the P92540-005 include?
A: The configuration includes 4× 32GB registered DIMMs for a total of 128GB of system memory.
Q: How many drive bays does the DL360 Gen12 P92540-005 have?
A: It comes with 8 SFF (Small Form Factor, 2.5-inch) drive bays managed by the HPE MR408i-O Gen12 RAID controller.
Q: Does the P92540-005 have redundant power supplies?
A: Yes. The P92540-005 ships with two 800W power supplies in a redundant configuration, allowing hot-swap replacement of a failed PSU without downtime.
Q: What VMS software is compatible with the HPE DL360 Gen12?
A: As a standard x86 server platform, the DL360 Gen12 supports any VMS software certified for Windows Server or Linux, including Milestone XProtect, Genetec Security Center, Axis Camera Station Pro, and Hanwha Wisenet WAVE. Check your VMS vendor's hardware compatibility list for minimum specifications.
Q: How heavy is the HPE P92540-005 for rack installation?
A: The unit weighs 67.70 lb as shipped. Verify your rack rail ratings and plan cable management accordingly before installation.
The P92540-005 is a tightly specified 1U platform — the Intel Xeon Gold 6505P at 2.2GHz with 12 cores is a deliberate choice for single-threaded-heavy workloads rather than maximum parallelism, which maps well to VMS servers where per-stream decode performance matters more than aggregate thread count. The 128GB memory footprint and 8 SFF bays give you room to grow without a chassis swap.
Technical Highlights:
- Single-socket 12-core CPU: The 6505P's single-socket design means you pay one processor license with VMS platforms that meter by socket — relevant when Milestone or Genetec licensing is part of your total cost calculation.
- MR408i-O Gen12 RAID: The OCP-form-factor controller offloads parity computation from the Xeon, keeping application cores available for decode and analytics tasks rather than storage overhead.
- Dual 800W redundant PSUs: In a 24/7 recording environment, this is the line item that separates a maintenance event from an incident — hot-swap the failed unit without a recording gap.
Deployment Considerations:
- At 67.70 lb, this is a fully loaded 1U chassis — specify your rack rails at the start of the project, not as an afterthought. Standard 1U rails rated for 50 lb will be undersized.
- The 8 SFF bays cap your internal raw storage at whatever the largest 2.5-inch drives support; for high-channel-count deployments with 30+ day retention, you may need external storage or a DL380-class platform with more bay capacity.
The P92540-005 is the right call for mid-size VMS deployments — 32 to 64 camera channels with active analytics — where you want a proven 1U HPE platform, a single-socket licensing footprint, and redundant power, without the cost or complexity of a dual-processor build.
