HPE P89196-005 ProLiant DL360 Gen12 1U Rack Server

The HPE ProLiant DL360 Gen12 P89196-005 is a 1U rack server configured with a single AMD EPYC 6505P 12-core processor, 2x32GB DDR5 registered DIMMs (64GB total), dual 480GB SATA SSDs, and an HPE MR408I-O storage controller — a purpose-built compute platform suited for edge VMS deployments, surveillance recording infrastructure, and enterprise workloads where rack density and reliable storage throughput matter. At 50 lb and 38.50 x 23.50 x 9.30 inches, this is a standard 1U footprint designed for data center or equipment room racks. For the full HPE server and compute catalog, additional configurations are available across the ProLiant line.

Key Features

• AMD EPYC 6505P 12-Core Processor: The EPYC 6505P delivers high per-core throughput in a single-socket package — meaningful for VMS platforms like Genetec or Milestone where video decode, motion analytics, and database I/O compete for CPU cycles on the same host. Single-socket design keeps licensing costs lower on per-socket software.
• 64GB DDR5 Registered Memory (2x32GB): 64GB of DDR5 registered ECC RAM gives VMS platforms ample headroom for high-channel-count recording (typically 32–64+ streams depending on resolution and codec) while ECC protection guards against silent data corruption — critical on always-on recording infrastructure.
• Dual 480GB SSD Boot/OS Drives: The two 480GB SSDs provide fast OS and application storage. In a VMS deployment, keeping the OS and VMS application on dedicated SSDs separate from video storage eliminates I/O contention between the recording engine and the OS — a known performance bottleneck on single-drive configurations.
• HPE MR408I-O RAID Controller: The MR408I-O is an entry-level 12Gb/s SAS/SATA controller supporting RAID 0/1/5/6/10 — allows the 8 SFF drive bays to be configured as a JBOD expansion array or protected RAID volume for bulk video storage. Selecting the right RAID level for surveillance (typically RAID 5 or 6) determines both your usable capacity and your rebuild tolerance if a drive fails mid-recording.
• 8 Small Form Factor (SFF) Drive Bays: Eight front-accessible SFF bays in a 1U chassis is dense storage for a rack server at this height. For a network video recording deployment, populating these bays with 2.5-inch enterprise SATA or SAS HDDs gives you the bulk capacity needed for multi-camera, multi-day retention without expanding to a 2U chassis.
• 1U Rack Form Factor — 38.50 x 23.50 x 9.30 in, 50 lb: Standard 1U depth (23.50 inches wide) fits most two-post and four-post equipment racks. At 50 lb configured, verify your rack's weight rating before dense-populating multiple units on the same shelf rail — rail kit compatibility with your specific rack brand should be confirmed at time of order.
• ProLiant Gen12 Platform: Gen12 introduces updated iLO 7 management, UEFI secure boot, and support for PCIe Gen 5 I/O — relevant if you're adding GPU-based analytics cards or high-throughput NIC expansion for a multi-gigabit recording network. The network switching infrastructure feeding this server should be sized accordingly.

Integration and Compatibility

The DL360 Gen12 P89196-005 is compatible with standard x86 VMS platforms including Milestone XProtect, Genetec Security Center, Avigilon Control Center, and Hanwha Wisenet WAVE, provided OS and driver prerequisites are met. HPE's iLO 7 management interface supports out-of-band remote management — useful for physically remote equipment rooms where in-person access to cycle power or check POST status isn't practical. For physical security integrators deploying this server as a dedicated surveillance server, pairing it with a dedicated storage expansion unit is recommended for deployments exceeding 30-day retention at high camera counts. Confirm VMS vendor hardware compatibility lists for Gen12 ProLiant prior to deployment, as some VMS platforms maintain explicit HCL requirements for server hardware certification. HPE Smart Array configuration utilities and SPP (Service Pack for ProLiant) firmware updates are available through HPE's support portal using the server's serial number post-deployment.

Frequently Asked Questions

Q: What processor does the HPE P89196-005 include?

A: The P89196-005 ships with a single AMD EPYC 6505P 12-core processor in a single-socket configuration.

Q: How much memory does the P89196-005 come with, and is it ECC?

A: The server includes 2x32GB DDR5 registered DIMMs for 64GB total. Registered DDR5 DIMMs used in ProLiant servers include ECC, providing protection against silent memory errors on always-on infrastructure.

Q: What RAID controller is included and what drive bays are available?

A: The P89196-005 includes the HPE MR408I-O controller paired with 8 Small Form Factor (SFF) front-accessible drive bays. The 2x480GB SSDs are pre-installed; remaining bays can be populated with additional 2.5-inch SAS or SATA drives per your storage design.

Q: Is the P89196-005 suitable for use as a VMS recording server?

A: Yes. The 12-core EPYC processor, 64GB DDR5 ECC memory, and 8 SFF drive bays make this a capable platform for mid-to-large VMS deployments. The MR408I-O controller supports RAID configurations appropriate for bulk video storage. Confirm your specific VMS vendor's hardware compatibility list before deployment.

Q: What are the physical dimensions and weight of the P89196-005?

A: The server measures 38.50 inches long x 23.50 inches wide x 9.30 inches tall and weighs 50 lb. It is a 1U rack-mount form factor.

Q: Does the P89196-005 include rail kits for rack mounting?

A: Rail kit inclusion depends on the specific order configuration. Verify rack-mount hardware is included or order the appropriate HPE rail kit compatible with your rack brand and depth before installation.

Eden Phillips

When I spec a dedicated VMS recording server for a 64-camera-plus deployment, the P89196-005 checks the boxes that matter operationally: the single AMD EPYC 6505P 12-core gives you enough thread headroom to run simultaneous recording, live decode for operator views, and motion/analytics processing without the licensing overhead of a dual-socket platform. The 8 SFF bays in this 1U chassis are the key density argument — you get expansion room for bulk HDDs without moving to a 2U footprint.

Technical Highlights:

• EPYC 6505P Single-Socket: 12 cores in a single socket means per-socket software licenses (VMS, OS, database) cost half of what a dual-socket equivalent would run — a real factor on commercial VMS deployments billed per server socket.
• 64GB DDR5 ECC (2x32GB): DDR5 registered ECC in a 24/7 recording server isn't optional — uncorrected memory errors on a VMS host can corrupt the recording index or crash the recording service silently. 64GB gives comfortable headroom for 48–96 camera streams depending on VMS and resolution.
• MR408I-O + 8x SFF Bays: The MR408I-O controller supports RAID 5/6, which is standard practice for surveillance storage (RAID 5 for capacity efficiency, RAID 6 if drive failure during rebuild is a concern on larger arrays). With 8 SFF slots, you can stage a meaningful capacity array while keeping the dual 480GB SSDs for OS and VMS application isolation.

Deployment Considerations:

• At 50 lb and 38.50 inches deep, confirm your rack has four-post mounting rails and sufficient depth — some wall-mount and two-post open-frame racks in IDF closets won't accommodate this chassis safely without additional support hardware.
• Rail kit compatibility is not guaranteed across rack brands — specify your rack manufacturer and model when ordering to confirm the correct HPE rail kit ships with the unit, or plan for a separate rail kit order to avoid delays at installation.

This configuration is well-matched for a centralized VMS recording server in a mid-large physical security deployment — think a 64–128 camera enterprise site running Milestone XProtect Corporate or Genetec Security Center where you need a single 1U host to handle recording, live view decode, and local database without external storage on day one, with room to add bulk HDDs as retention requirements grow.