HPE HU4A8A30BD0 DL360 G11 Storage Server FOR DP Supp

HPE HU4A8A30BD0 DL360 Gen11 Storage Server for Data Protection

The HPE HU4A8A30BD0 is a rack-mounted server platform in the ProLiant DL360 Gen11 family, configured as a supplemental storage node for data protection (DP) workloads. The DL360 Gen11 is HPE's 1U dual-socket compute platform, and this SKU is positioned specifically for backup, replication, or archive infrastructure rather than primary compute. If you are sourcing a storage-focused node to pair with a data protection software stack — Veeam, Commvault, Zerto, or HPE's own portfolio — this SKU targets that role. Country of origin is documented as US, which matters for TAA-sensitive federal and government procurement.

Overview

The HU4A8A30BD0 carries UNSPSC code 81111812, which maps to IT management and operation services/hardware in the UNSPSC taxonomy — consistent with a data-protection-role server appliance. As a DL360 Gen11 derivative, the platform inherits the Gen11 chassis architecture: 1U form factor, iLO 6 management, and HPE's current-generation silicon support. However, the specific configuration details for this SKU — CPU, RAM, drive bays, storage capacity, NIC, and power supply — are not published in the available source data. Contact for a configuration breakdown before committing to a bill of materials.

Key Considerations

• Data Protection Role: The "FOR DP Supp" designation in the product name signals this is a supplemental node in a data protection architecture — not a standalone primary server. Deploy it as an additional target or secondary node alongside an existing DP infrastructure, not as an entry-point standalone solution.
• DL360 Gen11 Platform: The Gen11 chassis supports HPE iLO 6 out-of-band management, which allows remote provisioning, firmware updates, and health monitoring without a KVM — a practical requirement in rack-dense environments where physical access is constrained.
• US Country of Origin: TAA compliance documentation is supported by the US country of origin designation, relevant for federal contracts, GSA schedules, and DoD procurement where country-of-origin verification is a contract requirement.
• UNSPSC 81111812: This code is used for procurement classification in ERP and eProcurement systems. Verify your organization's commodity code requirements match before raising a PO — mismatched UNSPSC codes can trigger procurement holds in SAP Ariba and similar platforms.

Integration and Compatibility

As a ProLiant DL360 Gen11 platform, this server is supported by HPE's Gen11 ecosystem: HPE iLO 6, HPE OneView, HPE InfoSight, and the full HPE Pointnext services catalog. It is compatible with standard 19-inch rack mounting (EIA-310) and supports HPE's current rail and cable management accessories. For data protection software compatibility — including Veeam Ready, Commvault HCL, or Zerto certification — verify against the specific drive and NIC configuration included in this SKU, as DP software certifications are configuration-specific.

Frequently Asked Questions

Q: What is the HU4A8A30BD0 designed for?

A: It is a ProLiant DL360 Gen11 server configured as a supplemental storage node for data protection workloads — backup, replication, or archive infrastructure rather than primary compute.

Q: Is the HU4A8A30BD0 TAA compliant?

A: The country of origin is documented as US, which supports TAA compliance requirements for federal and government procurement. Verify against your specific contract requirements.

Q: What rack space does the DL360 Gen11 require?

A: The DL360 Gen11 is a 1U server that mounts in a standard 19-inch EIA-310 rack. Confirm rail kit compatibility with your specific rack model before ordering.

Q: What management interface does this server use?

A: The DL360 Gen11 platform uses HPE iLO 6 for out-of-band management, supporting remote provisioning, health monitoring, and firmware updates without physical access to the server.

Q: Where can I find the full configuration details for HU4A8A30BD0?

A: The specific CPU, RAM, storage, and NIC configuration for this SKU is not published in the available source data. Contact pre-sales engineering for a complete configuration breakdown before purchasing.

Karl Wilson

The HU4A8A30BD0 is one of those SKUs where the product name tells you most of what you need to know before the spec sheet does: DL360 Gen11, supplemental role, data protection stack. That "FOR DP Supp" designation is not marketing — it signals this node is intended to extend an existing DP architecture, not anchor one. Before you drop it in a PO, confirm you have the primary DP target already provisioned and that this node's specific drive and NIC configuration matches what your software stack requires for a certified secondary node.

Technical Highlights:

• US Country of Origin: Documented US origin on this SKU means TAA compliance documentation is straightforward — relevant for any federal, GSA, or DoD procurement where country-of-origin attestation is a contract line item, not an afterthought.
• UNSPSC 81111812: The commodity code is published in the distribution feed, which matters more than it sounds — procurement systems like SAP Ariba and Coupa use UNSPSC matching to route approvals, and a mismatched code on a server PO can trigger a manual hold that delays deployment by days.
• DL360 Gen11 Platform: The Gen11 chassis brings iLO 6 management, which supports agentless health monitoring and remote firmware management — useful for DP nodes that often sit in secondary rack positions where physical access is infrequent.

Deployment Considerations:

• The specific configuration — CPU count, RAM capacity, drive bay count, and NIC — is not published in the available source data. Do not assume a standard DL360 Gen11 BTO configuration; request the exact component manifest from pre-sales engineering before building a DP architecture bill of materials around this SKU.
• DP software certifications (Veeam Ready, Commvault HCL, Zerto) are configuration-specific. A DL360 Gen11 with the wrong NIC or storage controller may not appear on the certified node list for your target software version — verify before deployment, not after.

This SKU fits cleanly into a rack-mounted data protection expansion scenario — specifically where you need to add a certified, US-origin supplemental storage target to an existing DP cluster without re-architecting the primary node. It is not the right entry point for a greenfield DP deployment where you need a primary target first.