Honeywell 8675I505-LNYRDRL Wearable Ring Scanner
Overview
The Honeywell 8675I505-LNYRDRL is a wearable ring-form barcode scanner purpose-built for warehouse, distribution, and field-service operations where workers need to capture 1D and 2D barcodes while keeping both hands free. Unlike traditional handheld scanners that require setting down merchandise or tools, the ring scanner sits on the operator's finger and eliminates the cognitive load of device management—a meaningful productivity gain in high-throughput logistics environments where workers process items continuously. Wireless Bluetooth connectivity keeps operators mobile without tether constraints, and the IP55 environmental rating handles dust and water splash in outdoor asset-tracking and loading-dock scenarios.
Key Features & Specifications
- 1D/2D Barcode Reading: Reads both linear codes (Code 128, Code 39, EAN/UPC, ITF-14) and 2D symbologies (QR, Data Matrix, PDF417) from a single sensor. This eliminates the need to carry separate scanners when your operation mixes legacy and modern barcode standards—one device handles both, reducing inventory complexity and training overhead.
- IP55 Environmental Rating: Dust-tight and water-resistant to low-pressure jets. Survives outdoor loading docks, rainy field audits, and dusty warehouse aisles without protective enclosures. However, avoid this model if your environment requires full submersion or explosive-atmosphere certification (IP67+ or ATEX/IECEx ratings)—neither is supported here.
- Bluetooth Wireless Connectivity: Pairs with enterprise mobile computers and tablets using HID (keyboard emulation) or Honeywell SPP (Serial Port Profile), eliminating cable drag and tether constraints that slow movement across large warehouse zones. Typical open-air Bluetooth range is 30–100 meters; validate this against your site topology, particularly in metal-heavy warehouse environments where range drops significantly.
- 380 mAh Battery with 8–12 Hour Runtime: Supports multi-shift operation under typical scan frequencies. The capacity is modest, so validate runtime against your shift length and scan volume before deploying a large fleet—high-frequency scanning (100+ scans per hour) or full 12+ hour shifts may require a mid-shift top-up. Battery cycle life degrades over 18–24 months of daily use.
- Lightweight 28g Form Factor: At 1.0 ounce, the ring sits comfortably for full-shift wear without hand or wrist fatigue. This matters in roles requiring 10+ hours of continuous scanning; heavier handheld scanners (200–300g) cause measurable fatigue and accuracy loss over extended shifts. The minimal weight also reduces repetitive strain injuries common in high-volume picking operations.
- Genuine Honeywell OEM Design: Built to Honeywell mechanical and electrical standards, ensuring predictable Bluetooth pairing, battery longevity, and compatibility with enterprise fleet-management tools. Third-party clones introduce unpredictable pairing behavior, warranty voids, and reduced technical support—avoid them in critical operations.
Integration & Compatibility
The 8675I505-LNYRDRL pairs with any mobile device or stationary host supporting Bluetooth HID or Honeywell SPP profiles. Enterprise deployments—particularly those using Zebra, Datalogic, or in-house mobile-computer platforms—should pilot with a sample of target hardware to validate pairing stability and data-flow reliability before large rollouts. Bluetooth interference in dense warehouse environments with multiple access points or Wi-Fi networks can reduce effective range and increase reconnection latency; test signal coverage in your target zones before committing to fleet-wide deployment.
Deployment Context
The 8675I505-LNYRDRL excels in high-motion, continuous-scanning roles: order-picking, pack-and-ship line operations, field-service asset audits, and outdoor lot inventories. It is not ideal for stationary scanning stations or roles requiring frequent device set-down—traditional handheld or hands-free headset-mounted scanners are better suited there. The two limiting factors are battery life (validate against shift length) and Bluetooth range (confirm against your site's metal density and RF environment). If your operation requires longer shifts or denser coverage, pilot a sample before committing to large quantities.
Frequently Asked Questions
Q: What barcode symbologies does the 8675I505-LNYRDRL read?
A: The scanner handles standard 1D codes (Code 128, Code 39, EAN/UPC, ITF-14) and 2D symbologies (QR, Data Matrix, PDF417). Configuration and enable/disable of specific symbologies is performed via Honeywell configuration tools or the paired mobile device's app.
Q: What is the effective Bluetooth range of the 8675I505-LNYRDRL?
A: Typical Bluetooth range is 30–100 meters in open air. In metal-heavy warehouse environments with RF interference from Wi-Fi, cellular, or dense access-point networks, effective range drops to 15–40 meters. Test your specific site topology before deploying a large fleet.
Q: Does the 8675I505-LNYRDRL battery support a full 12-hour shift?
A: Yes, under typical scan frequencies (15–50 scans per hour). High-frequency scanning environments (100+ scans/hour) or continuous use may reduce runtime to 8–10 hours. Validate against your shift profile and scan volume before deployment. Battery capacity degrades roughly 10% per year of daily use.
Q: Is the 8675I505-LNYRDRL waterproof or just water-resistant?
A: IP55 rating means dust-tight and water-resistant to low-pressure jets, but not fully waterproof (submersion). It handles rain, splash, and outdoor loading-dock conditions. Do not submerge or expose to high-pressure water jets—that requires IP67 or higher ratings not supported on this model.
Q: Can the 8675I505-LNYRDRL integrate with our existing Zebra or Android mobile platform?
A: Yes, provided the host device supports Bluetooth HID or Honeywell SPP profiles. Most modern Android and enterprise mobile computers support both. Test pairing and data flow with a sample unit on your target hardware before large rollouts to ensure compatibility and Bluetooth stability in your RF environment.
Q: What warranty and support does Honeywell provide for the 8675I505-LNYRDRL?
A: OEM warranty coverage applies to genuine Honeywell units. Specific terms (duration, coverage scope, repair vs. replacement) vary by region and purchase agreement. Confirm details with your Honeywell account team or authorized distributor before purchase.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Honeywell 8675I505-LNYRDRL makes sense when your operation can't afford the throughput loss of handheld scanner set-down cycles. The 28-gram weight is the real differentiator here—at full-shift scale (8–12 hours of continuous scanning), that light form factor directly reduces hand fatigue and accuracy drift that slows pickers on high-volume sort lines.
Technical Highlights:
- 380 mAh Battery (8–12 Hour Runtime): Supports multi-shift operation under typical scan frequencies (15–50 scans/hour). High-volume environments (100+ scans/hour) will see runtime compression to 8–10 hours; validate shift length and scan volume before fleet deployment. Battery capacity fades roughly 10% per year of daily cycling.
- IP55 Rating: Handles dust and low-pressure water spray—good enough for outdoor loading docks and rainy field audits. Not submersion-rated (no IP67), so skip this if your site has wet-floor zones or washdown requirements demanding full water resistance.
- Bluetooth Connectivity (30–100m Open Air): Range drops to 15–40 meters in metal warehouse environments with RF noise. Do an on-site Bluetooth site survey before committing to fleet quantities; interference from Wi-Fi APs, cellular, and dense metal shelving is a real gotcha that gets blamed on the scanner when it's an environment issue.
Deployment Considerations:
- Pilot a sample unit on your actual target hardware (Zebra, Datalogic, Android) to validate HID or SPP pairing stability. Bluetooth profile support varies, and troubleshooting pairing failures at scale is painful.
- Battery degradation is real—plan for 8–10% annual capacity loss. A 12-hour-runtime device becomes an 11-hour device after 18 months; factor that into shift planning and rotation schedules.
- Do not assume 100-meter Bluetooth range; test your site's actual coverage in the zones where workers spend the most time. Dense shelving and metal infrastructure create dead zones that won't be obvious on a vendor spec sheet.
Deploy the 8675I505-LNYRDRL in order-picking, pack-and-ship, and field-service operations where hands-free scanning directly improves throughput. Skip it for stationary scanning stations or environments with full-submersion water requirements—traditional handheld or headset scanners are better fits there.
