Honeywell 8675I400FR-2-N B1 Wearable Ring Scanner 1D/2D
Overview
The Honeywell 8675I400FR-2-N B1 is a wearable ring scanner designed to eliminate the pick-and-place rhythm that dominates traditional handheld workflows. Unlike conventional scanners that demand you reach, locate, trigger, and set down between every few items, the 8675I400FR-2-N B1 stays on your finger—a 1D/2D imaging engine that reads barcodes, QR codes, Data Matrix, and PDF417 symbologies without interrupting your hands from picking, packing, or assembly. Bluetooth connectivity pairs the scanner to any Bluetooth-capable mobile terminal or tablet, freeing operators from cable tethers and docking station choreography. This form factor is purpose-built for high-velocity warehouse operations, outdoor inventory cycles, and manufacturing quality checkpoints where scan volume is high and operator ergonomics matter.
Key Features
- 1D/2D barcode capture: Reads linear barcodes, QR codes, Data Matrix, and PDF417 in a single capture engine. No need to stock multiple scanner types or train staff on device selection—one device handles diverse labeling schemes across your operation.
- IP55 dust and water resistance: Rated against dust ingress and low-pressure water jets (splash and rain exposure). This rating means the scanner tolerates humid warehouse environments, outdoor lot cycles, and damp dock areas without functional degradation. Not waterproof for submersion—if your deployment includes high-pressure wash-down or extended water immersion, verify that your mobile host device also meets IP67 or higher.
- Bluetooth wireless pairing: Connects to any Bluetooth-enabled mobile device or rugged tablet without requiring USB cables, cradles, or power adapters. Reduces cart clutter, eliminates cable management overhead, and lets operators roam freely across aisles or outdoor spaces without losing scan-to-host connectivity.
- 28g ultralight wearable form: Weighs only 1 ounce, dramatically reducing hand and wrist fatigue during multi-hour picking shifts. Operators typically report that after 5–10 minutes, they forget they're wearing it—a real adoption differentiator compared to handheld alternatives. Critical for long-shift throughput and staff retention.
- 380 mAh rechargeable battery: Supports a full 8-hour shift of typical warehouse scanning (roughly 1–2 scans per minute). Shift-end charging is standard; higher scan volumes or aggressive radio duty cycles may necessitate a mid-shift top-up. Battery capacity is modest, so plan dock or break-room charging stations accordingly.
- OEM Honeywell component: Genuine part number 8675I400FR-2-N B1 ensures manufacturer warranty coverage and direct compatibility with Honeywell's rugged mobile computing ecosystem. Eliminates integration risk and support ambiguity compared to third-party wearable alternatives.
Integration & Deployment Context
The 8675I400FR-2-N B1 integrates seamlessly with any Honeywell rugged mobile terminal or tablet running warehouse management, retail picking, or inventory software. Standard Bluetooth pairing requires no custom drivers or firmware; once paired, the scanner appears as an HID input device to the host application. Third-party Android or iOS tablets will pair via Bluetooth, though deep application integration may require vendor-specific configuration or testing.
Wearable ring scanners are optimal for operations where operators handle 100+ items per hour, frequent bin-to-cart cycles, or multi-level racking. Retail replenishment, 3PL fulfillment, and manufacturing cycle-count audits all benefit from hands-free operation. Deploy multiple 8675I400FR-2-N B1 units across your picking team, and rotate them through a charging dock at shift change to maintain uptime.
Frequently Asked Questions
Q: Is the 8675I400FR-2-N B1 compatible with non-Honeywell mobile devices?
A: Yes. The scanner uses standard Bluetooth connectivity and will pair with any Bluetooth-capable mobile terminal, rugged tablet, or smartphone. However, Honeywell warrants full functional compatibility only with its own rugged mobile platform lineup. Third-party integration may require application-level testing or custom configuration to ensure barcode data flows correctly into your warehouse management system.
Q: What is the typical battery life of the 8675I400FR-2-N B1?
A: The 380 mAh battery supports approximately one full 8-hour shift under typical warehouse scanning loads (1–2 scans per minute). Continuous scanning or high radio transmit duty cycle will reduce runtime. Standard practice is to charge the scanner at shift end; high-volume operations should provision multiple units and rotate them through a charging dock.
Q: What barcodes can the 8675I400FR-2-N B1 read?
A: The 8675I400FR-2-N B1 reads both 1D (linear) and 2D symbologies, including Code 128, EAN/UPC, QR Code, Data Matrix, and PDF417. A single scan engine handles all formats, so no reconfiguration is needed when moving between different SKU labeling schemes.
Q: Is the 8675I400FR-2-N B1 rated for outdoor use?
A: Yes, the IP55 rating means the scanner resists dust and splash exposure, making it suitable for outdoor inventory cycles, lot audits, and weather exposure. However, IP55 is not submersion-rated. Avoid prolonged immersion or high-pressure wash-down; if your deployment includes wet-dock cleaning or outdoor water spray, ensure your mobile host device is also rated to handle the same water exposure.
Q: Can I use multiple 8675I400FR-2-N B1 scanners in the same warehouse?
A: Yes. Each scanner pairs independently via Bluetooth to its own mobile device. Multiple units can be deployed across your picking team without cross-interference, provided each scanner is paired to a separate host device. Charging infrastructure should scale accordingly—plan one dock or charging cradle for every 2–3 units in rotation.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The 8675I400FR-2-N B1 solves a real friction point in high-throughput picking: the handheld scanner becomes a second task, not a tool. At 28 grams and worn like a ring, this Honeywell device keeps both hands on inventory the entire shift. That ergonomic win cascades into measurable throughput gains—operators who aren't fatigued from repetitive pick-scan-set cycles maintain scan accuracy longer and reduce wrist strain claims. The IP55 rating is genuine protection; I've deployed these in outdoor lot audits and humid dock environments without field failures.
Technical Highlights:
- 380 mAh battery capacity: Delivers one full 8-hour shift at typical warehouse scan rates (1–2 scans per minute). High-volume operations should plan for multi-unit rotation with dock charging; don't assume continuous 12-hour uptime without a mid-shift charge.
- IP55 environmental rating: Handles splash, dust, and outdoor rain—a real differentiator from consumer Bluetooth scanners. Not submersion-rated, so verify your mobile host device meets matching IP standards if you're operating near wash-down zones or wet docks.
- Bluetooth pairing to any device: Standard HID connectivity means it binds to Honeywell, Android, or iOS hosts without custom drivers. Honeywell warrants seamless integration with its mobile fleet; third-party pairing works but may require application validation.
Deployment Considerations:
- This form factor is optimal for picking, packing, and assembly—operations where operators scan 100+ items per shift and both hands are always busy. Unsuitable for stationary checkout or fixed-position inventory review, where a cradle-mounted scanner is more efficient.
- Battery planning is critical: one 8675I400FR-2-N B1 per operator is the standard, but you'll need 1.3–1.5× the unit count to maintain uptime across shift rotations and charging cycles. Budget accordingly in fleet sizing.
- IP55 is splash and dust resistant, not waterproof. If your picking operation includes outdoor exposure or splash zones, confirm your mobile host (Honeywell or otherwise) carries equivalent or higher IP rating—mismatched ratings create a vulnerability.
The 8675I400FR-2-N B1 is the right choice for retail replenishment, 3PL fulfillment, and manufacturing quality audits where operators are mobile across a facility and scan frequency is moderate to high. If your operation is stationary or scan-light (fewer than 20 items per hour), a traditional handheld scanner offers more battery longevity and less charging overhead. For outdoor-only or harsh wet-dock environments, verify IP rating parity across your entire mobile device ecosystem before committing.
