Honeywell 8675I200SR-2-N B1 Wearable Ring Scanner
Overview
The Honeywell 8675I200SR-2-N B1 is a wearable ring scanner engineered for warehouse, distribution, and field service environments where hands-free barcode capture directly impacts throughput and worker ergonomics. Unlike traditional handheld scanners that occupy one hand and create fatigue over an 8+ hour shift, this form factor leaves both hands free for picking, packing, or material handling—a meaningful advantage in high-velocity SKU environments where you're scanning dozens or hundreds of items per shift. The 8675i family is built around the principle that mobility and ergonomics are not negotiable in modern warehousing.
Key Features & Specifications
- 1D/2D Barcode Scanning: Reads linear codes (UPC, Code 128, Code 39) and matrix symbologies (QR, Data Matrix, PDF417). This dual-engine approach protects you against format lock-in—as suppliers change or operations evolve, you're not forced to upgrade hardware or retrain workers on new scan procedures.
- Bluetooth Wireless Connectivity: Operates at typical Bluetooth ranges of 30–100 feet depending on obstacles and receiver placement. Workers move freely across the warehouse floor without cable entanglement or docking delays that slow pack-and-ship workflows. Standard Bluetooth HID (Human Interface Device) means compatibility with any Bluetooth-enabled mobile computer or tablet running warehouse management software—no proprietary middleware required.
- IP55 Environmental Rating: Dust and water resistance handle routine warehouse spray-downs, outdoor loading dock operations, and humid or dusty environments without additional protective housings that add weight or maintenance overhead. Skip this device if you need full submersion (that requires IP67 or higher); for typical indoor/outdoor warehouse use, IP55 is sufficient.
- 28 Gram Weight (1.0 oz): Light enough for all-shift wear without cumulative hand and wrist fatigue—a critical factor when workers are scanning 8–10 hours daily. Compared to traditional ring-mounted or finger-trigger handhelds, the 28g mass keeps ergonomic penalty minimal, reducing worker compensation claims and turnover friction.
- 380 mAh Battery Capacity: Supports multi-shift operation on a single charge in typical warehouse pick-pack workflows. Exact shift duration depends on scan frequency and idle sleep behavior. For most distribution centers running 8-hour shifts with moderate-to-high scan volume, one charge covers the workday without mid-shift recharging or hot-swaps.
- Wearable Ring Form Factor: Worn on the index or middle finger, triggering scans via a thumb button or pressure contact. This ergonomic design reduces repetitive strain injuries compared to pistol-grip handhelds and leaves both palms available for package manipulation—a real win in tight space picking environments or when workers are climbing ladders or reaching into bins.
Integration & Compatibility
Pair the 8675I200SR-2-N B1 with any Bluetooth-enabled mobile computer or tablet running standard warehouse management or inventory software. Honeywell devices in the 8675i family integrate via standard Bluetooth HID without requiring special firmware, drivers, or integration layers beyond what the receiving application already supports. Configuration is straightforward: enable Bluetooth on the host device, pair the ring scanner, and scans appear as keyboard input to the WMS application. This simplicity makes deployment faster and reduces IT touch points.
The 8675i is well-suited for fast-pick, high-velocity SKU, or multi-zone scanning workflows where hands-free operation directly increases productivity. It is less ideal for low-volume or sporadic scan tasks, where pairing overhead and form-factor adjustment outweigh the hands-free benefit. For stationary picking at fixed scan stations or for operations requiring longer wireless range (beyond ~100 feet), evaluate traditional handheld scanners or fixed-mount presentation scanners from the Honeywell barcode scanner portfolio.
When to Choose a Different Model
If your operation requires Bluetooth range exceeding 100 feet or needs on-device data buffering and local storage, consider Honeywell's industrial-grade mobile computers with integrated 2D scan engines—these typically include stronger RF performance, larger batteries, and application-level processing. If workers are stationary and scanning is infrequent, fixed-mount presentation scanners deliver lower per-unit cost and eliminate battery concerns. For legacy serial/USB integration or advanced symbology filtering, traditional handheld scanners remain the safer choice.
Frequently Asked Questions
Q: Does the 8675I200SR-2-N B1 work with Android tablets and iOS devices?
A: Yes. The ring scanner pairs via standard Bluetooth HID. Any mobile device (Android, iOS, Windows) with Bluetooth and HID support can receive scan data. Compatibility depends on the warehouse management application running on the device, not the scanner itself.
Q: What is the effective Bluetooth range?
A: Typical Bluetooth range is 30–100 feet depending on obstacles, RF interference, and receiver antenna placement. Dense warehouse racking and metal structures reduce range; open floor plans extend it. Test in your facility before large rollout.
Q: Can the 8675I200SR-2-N B1 survive an accidental drop?
A: The IP55 rating indicates dust and water resistance, not impact protection. Wearable form factor and light 28g mass reduce drop impact compared to heavier handhelds. For drop-test data or ruggedness specifications beyond IP55, consult the Honeywell datasheet.
Q: How long does the 380 mAh battery last on a full charge?
A: Multi-shift operation is typical in standard warehouse workflows. Actual runtime depends on scan frequency, idle sleep behavior, and Bluetooth connectivity patterns. Most distribution centers report full-shift operation (8 hours) without recharging at moderate-to-high scan volumes.
Q: Is the 8675I200SR-2-N B1 suitable for outdoor yard or dock operations?
A: Yes. IP55 rating handles outdoor spray-downs, rain, and dust without protective casings. Use it for outdoor asset tracking, yard inventory, or dock gate scanning. For sustained outdoor cold-weather use, verify the operating temperature range in the Honeywell datasheet.
Q: What warranty applies to the 8675I200SR-2-N B1?
A: Refer to the Honeywell standard limited warranty for the 8675i product line. Contact the distributor or Honeywell directly for warranty terms, coverage, and claim procedures.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Honeywell 8675I200SR-2-N B1 solves a specific ergonomic and throughput problem that traditional handheld scanners create in high-velocity picking environments. A 28-gram wearable ring eliminates hand fatigue over an 8–10 hour shift and leaves both palms free for package manipulation—this matters when your pick rate is measured in hundreds of items per shift and workers are cycling between bins, shelves, and conveyor lines. The 380 mAh battery is sized for multi-shift warehouse use, not consumer convenience; it reflects a realistic understanding of how distribution centers actually operate.
Technical Highlights:
- 1D/2D Dual-Engine Scanning: Covers linear codes (UPC, Code 128, Code 39) and matrix codes (QR, Data Matrix, PDF417) without format-specific reconfiguration. If your operations mix barcodes from different suppliers or you transition between symbologies, this flexibility avoids hardware replacement.
- IP55 Dust and Water Resistance: Handles routine warehouse spray-downs and outdoor dock operations without additional protective casings. This is a meaningful weight and cost saving compared to ruggedized handhelds with equivalent environmental protection. Know your limits: IP55 is splash- and dust-resistant, not submersible; if you need underwater durability, that's IP67 or IP68 territory.
- Bluetooth HID Standard Protocol: Integrates with any Bluetooth-enabled mobile device using standard human interface device emulation. No proprietary drivers, no middleware licensing, no lengthy integration projects. Configuration is minutes, not weeks.
- 28-Gram Mass Over an 8-Hour Shift: Cumulative ergonomic load matters. A 28g ring versus a 400g handheld reduces repetitive strain injuries and worker turnover. Over a 100-person warehouse, this translates directly into HR cost savings and productivity consistency.
Deployment Considerations:
- Range Planning: Bluetooth effective range is 30–100 feet depending on warehouse density and RF environment. Dense racking, metal shelving, and structural steel reduce range significantly. In large open warehouses (10,000+ sq ft), you may need multiple Bluetooth receivers or repeater infrastructure to maintain consistent connectivity. Test this in your facility before committing to a fleet deployment.
- Not Ideal for Low-Velocity or Stationary Scanning: If workers spend most of their day at a fixed scan station, the pairing and form-factor adjustment overhead outweighs the hands-free benefit. Fixed-mount presentation scanners or traditional handheld devices are more cost-effective for stationary workflows.
- Battery Behavior in Sleep Mode: The 380 mAh battery supports multi-shift operation, but this assumes proper idle sleep behavior and periodic charge cycles. If the device is powered 24/7 without sleep states, runtime will degrade. Verify your WMS and Bluetooth pairing supports graceful sleep/wake to maximize shift duration.
Deploy the 8675I200SR-2-N B1 in fast-pick distribution centers, high-velocity SKU warehouses, or yard/dock asset tracking where hands-free scanning and worker ergonomics directly drive productivity and retention. This is not a one-size-fits-all device—it's purpose-built for mobile, high-frequency barcode capture. For stationary scanning, low-frequency tasks, or specialized symbologies, other form factors will serve you better.
