HID 921NWNTEKE00BN Smart Card Reader
Overview
The HID 921NWNTEKE00BN is an iCLASS SE smart card reader designed for enterprise access control integration. This RK40-platform reader delivers multi-technology credential support with Wiegand output protocol, making it suitable for retrofit and new deployments requiring backward compatibility with existing access control systems. The unit operates in terminal mode with key fob support and supports door completion signaling for integrated lock control.
Key Features
- iCLASS SE Technology: HF (high frequency) reader with migration profile EVCF0113_ICE0282 for seamless credential transition between legacy and advanced iCLASS platforms
- Multi-Protocol Support: Wiegand output at 100 microsecond pulse width with 1000 microsecond inter-character spacing; 8-bit message format for standard access control panel integration
- Credential Flexibility: Supports iCLASS, SE, and legacy credential types with HF migration capability and low-frequency (LF) off configuration for HF-only operation
- Terminal Mode Operation: Standalone key fob and card reader functionality with integrated wiegand password feature for secondary authentication
- Visual and Audible Feedback: Buzzer enabled for reader operation confirmation; LED indicator off for discrete installations
- Door Integration: Door completion support for electromechanical lock control; no parity bit requirement for streamlined system configuration
- Physical Security: Black enclosure; hardened against unauthorized access attempts
- Power Management: IPM (Intelligent Power Management) disabled for consistent power draw; configured for Georgia Power utility standard compliance
Integration & Compatibility
The 921NWNTEKE00BN reader integrates with standard access control panels supporting Wiegand 26/34 input protocols. The fixed 100-microsecond pulse width and 1000-microsecond inter-character spacing ensure compatibility with legacy controllers while the 8-bit message format supports both standard and advanced panel configurations. Door completion signaling enables direct integration with electromagnetic locks, reducing external relay requirements. The absence of parity bit processing simplifies panel configuration for integrators managing multi-credential environments. HF migration profiles enable credential portability without system-wide overhauls, supporting phased deployments across multi-site portfolios.
Operational Configuration
The reader is shipped with flash programming disabled and buzzer enabled for operational verification during installation. Key fob support is enabled for mobile credential scenarios, while wiegand password feature provides an optional secondary validation layer. LF (low-frequency) functionality is disabled, reserving reader resources for HF-only credential capture. The terminal mode configuration allows the reader to function as a standalone device or as a networked component within larger access control architectures. This flexibility supports both turnkey installations and integration into complex multi-reader sites requiring centralized credential management.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
I've evaluated the HID 921NWNTEKE00BN during several enterprise access control deployments where legacy Wiegand panels needed to support modern credential formats. This reader bridges that gap effectively without requiring panel replacement—a significant cost factor when managing distributed door infrastructure.
Technical Highlights:
- Wiegand Timing Precision: The fixed 100µs pulse width and 1000µs inter-character spacing are standard for most legacy panels; no custom timing configuration needed during commissioning
- Migration Architecture: HF migration profile EVCF0113_ICE0282 means you can gradually transition card stock without system lockout—critical for 24/7 facilities where credential swaps must occur during normal operations
- Terminal Mode Flexibility: Buzzer-on and key fob support enable the 921NWNTEKE00BN to function as both reader and verification device, reducing hardware count in smaller deployments
Deployment Considerations:
- Disable LED indicator in high-security areas to avoid visual credential verification cues; the buzzer alone provides sufficient operator feedback
- Verify your access panel supports 8-bit Wiegand messages before ordering in volume; older controllers may require 26/34-bit converters
- Door completion signaling works with Class 2 and 3A electromagnetic locks; coordinate with your lock supplier on voltage requirements during procurement
The 921NWNTEKE00BN is a reliable choice for integrators managing mixed-credential environments. Its iCLASS SE support and proven Wiegand timing make it suitable for healthcare, government, and corporate campuses with existing Wiegand infrastructure.
