HES

HES · 1600-606-LMS

HES Electric Strike Body Only Lock monitor and - 1600-606-LMS

When you need to retrofit an existing electric strike installation with lock monitoring capability, swapping out the entire assembly isn't always

• Drop-in body replacement retrofits existing HES 1600 series strikes without new frame prep.
• Integrated lock monitor delivers contact closure signal directly to your access control panel.
• Eliminates separate door position switches by confirming keeper engagement in one unit.

HES · 1600-606-LM

HES Electric Strike Body Only Lock monitor - 1600-606-LM

When you need to replace a failed strike body without rewiring the entire frame prep, or you're upgrading an existing 1600 series installation to

• Body-only form factor swaps into existing 1600 series frames without re-prepping cutouts.
• Integrated lock monitor adds keeper position feedback to panels lacking position sensing.
• Supports forced-door and door-held-open alarms when wired to compatible access controllers.

HES · 1600-606-DLMS

HES 1600-606-DLMS Electric Strike - Body Only

When you're retrofitting access control into existing openings or replacing failed strike components, you need the body assembly without redundant

• Strike body assembly for field replacement on 1006/1600 series
• Dual lock monitor contacts report latch and aux bolt status
• Retrofit-friendly without complete strike changeout

HES · 1600-606-DLM

HES 1600-606-DLM Electric Strike

• Dual lock monitors deliver independent latch and deadbolt status signals to your access control panel.
• Body-only design replaces failed strike without faceplate removal, cutting retrofit and service time.
• Rated UL 1034 and UL 10C 3-hour fire, with 1,500 lb static strength for commercial-grade reliability.

HES · 1600-606

HES Electric Strike Body Only Satin brass - 1600-606

• Drop-in body-only replacement for HES 1600 series cuts material and labor costs.
• Rated 1,500 lbs static strength with UL 1034 and UL 10C 3-hour fire listings.
• 12/24V DC field-selectable operation draws only 0.13 A at 24V DC.

HES · 1600-605-LMS

HES Electric Strike Body Only Lock monitor and - 1600-605-LMS

• Integrated lock monitor confirms latch engagement, closing audit-trail gaps.
• Body-only format supports retrofit installs on existing cylindrical or mortise hardware.
• Monitor output feeds directly to access control panels for real-time alarm verification.

HES · 1600-605-LM

HES Electric Strike Body Only Lock monitor - 1600-605-LM

• Body-only format pairs with existing HES 1600 series faceplates for retrofit installs.
• Integrated lock monitor output enables forced-door and door-ajar alerts at the panel.
• Suits wood, hollow metal, and aluminum frames; supports fail-secure or fail-safe wiring.

HES · 1600-605

HES Electric Strike Body Only Bright brass - 1600-605

When you need to replace a failed strike body in an existing HES 1600 series installation without tearing out the entire frame prep, this body-only

• Body-only swap preserves existing 1600 series faceplate and frame prep, cutting service labor.
• 1,500 lb static strength with UL 1034 and UL 10C 3-hour fire listing meets code requirements.
• 12/24V DC field-selectable operation draws just 0.13 A at 24V, minimizing panel load impact.

HES · 152:UNIVERSAL MOUNTING TABS

HES 152:UNIVERSAL MOUNTING TABS - Mount inside hollow metal

Installing electric strikes in hollow metal frames without proper backing creates flex, misalignment, and premature failure

• Solid backing inside hollow metal frames prevents strike flex and misalignment.
• Eliminates field welding or custom fabrication, reducing installation labor and risk.
• Distributes fastener loads across frame cavity to extend strike service life.

HES · 150:STRIKE LATCH GUARD

HES 150:STRIKE Latch Guard

Door frame gaps and misaligned strikes create vulnerabilities that undermine even the best electric strike installations

• Stainless steel (630 satin) construction withstands high-cycle commercial door use.
• Guides latchbolt into alignment, reducing intermittent failures and service calls.
• Surface-mounts between strike and frame to compensate for prep tolerances and settling.

HES · 1500C-BSP-LM

Hes 1500C-Bsp-Lm

• Fail-secure at power loss; 1,500 lb static strength meets institutional force requirements.
• LM monitor output delivers real-time latch status to access control panels and audit logs.
• 12/24V DC field-selectable voltage simplifies integration with existing power supply infrastructure.

HES · 1500C-BSP

HES 1500 Series Electric Strike Latchbolt Lock - 1500C-BSP

When you need reliable fail-secure latchbolt control in hollow metal or wood frames, the HES 1500 Series delivers field-proven performance without

• Fail-secure mode keeps the door locked on power loss — critical for IT closets and perimeter doors.
• 12/24V DC field-selectable operation integrates directly with most access control panels.
• UL 1034 and UL 10C 3-hour fire-rated; 1,500 lb static strength for high-security frames.

HES · 1500C-630-LM

HES 1500C-630 LM - Lock monitor - 1500C-630-LM

• Form C dry contact output integrates with virtually any access control panel.
• Monitors actual bolt retraction, not just power state, closing the verification loop.
• Field-installs on compatible HES 1500 series strikes without replacing existing hardware.

HES · 1500C-630-DLMS

HES 1500C-630-DLMS Heavy Duty Electric Strike with Dual Lock

• Field-selectable 12/24V DC operation eliminates duplicate SKUs across mixed-voltage projects.
• DLMS provides independent fail-secure and fail-safe status feedback for supervised access panels.
• UL 1034 and UL 10C 3-hour fire-rated; 1,500 lb static strength meets Grade 1 requirements.

HES · 1500C-629-LMS

HES Complete Electric Strike Kit - 1500C-629-LMS

When retrofitting access control into existing openings or standardizing hardware across multi-building projects, component compatibility becomes the

• Complete kit—strike body, faceplate, lip, and hardware—eliminates mismatched component callbacks.
• LMS reports latch position and strike status to ACS panels, enabling forced-entry detection.
• Accepts 12/24 VDC or VAC with internal rectification; field-reversible for left or right hand.

HES · 1500C-612-LMS

Hes 1500C-612-Lms

• Fail-secure mode keeps the door locked on power loss, protecting perimeter security.
• 12/24V DC field-selectable voltage simplifies deployment across mixed control systems.
• LMS dual monitoring of lock and strike status supports real-time access control auditing.

HES · 1500C-612

HES 1500C-612 Electric Strike Satin Bronze

• Accepts 12VDC or 24VDC input, fitting existing access control panel wiring.
• Field-selectable fail-secure/fail-safe mode supports code-compliant egress design.
• Latchbolt monitoring delivers real-time door position feedback to control panels.

HES · 1500-630

HES SB-1500-630 Strike Body Kit

• Fail-secure strike body kit for aluminum storefront doors
• 24VDC operation simplifies power supply and panel wiring
• Standard jamb fit for narrow-stile commercial frames

HES · 1200DE

HES Alarm Controls 1200DE Delayed Egress Magnetic Lock 1200 lb

When you need to secure emergency exits while maintaining code compliance, the delayed egress magnetic lock solves the conflict between security and

• Field-selectable 15/30-sec delay timer meets IBC and NFPA code requirements.
• 12/24V DC dual-voltage operation integrates with most access control power supplies.
• Built-in door position sensor and bi-color LED deliver real-time bond status feedback.

HES · 1200DDURO

HES Alarm Controls 1200DDURO Double Door Magnetic Lock DURO

• Single 12/24V DC unit secures both door leaves simultaneously at 600 lbs per leaf.
• Built-in door position sensor and bi-color LED confirm bond status without add-on hardware.
• UL Listed for Access Control with a lifetime warranty; integrates via dry contact relay.