HES

HES · 1600-629-DLM

HES 1600-629-DLM Electric Strike - Body Only

• Dual lock monitors give independent latch and deadbolt status to your access control panel.
• Body-only format reuses existing 1600 Series faceplates, cutting retrofit labor and parts cost.
• Rated UL 1034 and UL 10C 3-hour fire with 1,500 lb static strength for commercial-grade doors.

HES · 1600-613E-DLM

HES Electric Strike Body Only 1600 Dual lock - 1600-613E-DLM

When you're replacing a failed strike body in an existing access control installation, you need the exact component—not a full kit with hardware

• Dual Lock Monitor (DLM) independently confirms latchbolt and deadbolt status in real time.
• 1,500 lb static strength with UL 1034 and UL 10C 3-hour fire listings meets strict code requirements.
• 12/24V DC field-selectable input simplifies retrofit into existing panel wiring without rewiring.

HES · 1600-612-DLMS

HES 1600-612-DLMS Electric Strike - Dual Lock

• Strike body-only design enables component-level retrofit without disturbing existing frames.
• Dual lock monitor outputs deliver independent latch and deadbolt status signals to your panel.
• Discrete monitor contacts support direct integration with alarm systems and BMS platforms.

HES · 1600-612-DLM

HES 1600-612-DLM Electric Strike - Dual Lock Monitors

When you're retrofitting access control into existing frames or replacing failed strike bodies without tearing out the entire installation, a

• Dual lock monitors signal latch and bolt status independently—no extra sensors needed.
• 1,500 lb static strength with UL 1034 and UL 10C 3-hour fire listing for compliant installs.
• 12/24V DC field-selectable operation fits existing power supplies without rewiring.

HES · 1600-605-DLMS

HES 1600-605-DLMS Electric Strike - Body Only

When you need to monitor both latch and deadbolt status on a controlled opening, relying on a single sensor leaves critical blind spots in your

• Dual independent monitors confirm both latch and deadbolt status from one strike body.
• Body-only design lets you field-configure faceplate, keeper, and voltage for the opening.
• Direct panel integration delivers real-time door status without external sensors or added wiring.

HES · 1600-605-DLM

HES 1600-605-DLM Electric Strike - Dual Lock Monitors

When you're integrating access control into existing door hardware or replacing failed strike components, you need flexibility without tearing out

• Dual lock monitors output separate bolt and door status signals for precise event differentiation.
• Fail-secure mode holds the door locked on power loss; rated 1,500 lbs static strength.
• UL 1034 and UL 10C 3-hour fire listed; body-only design fits existing 1600 series faceplates.

HES · 10790024

Hes Fp:852m-612 - 10790024

• Stainless steel faceplate in 612 Satin Bronze finish resists corrosion in commercial frames.
• Direct-replacement design for 852M mortise locks eliminates frame modification or rework.
• Field-installable trim reduces swap-out time during scheduled maintenance or hardware upgrades.

HES · 10790023

Hes Fp:852m-606 - 10790023

When you're specifying access control for commercial door applications requiring reliable fail-secure operation, the HES FP:852M-606 delivers proven

• Fail-secure design keeps doors locked during power loss, protecting perimeter zones.
• Direct-replacement faceplate for HES 852M mortise strikes installs without frame rework.
• 606 satin brass stainless steel finish coordinates with standard architectural hardware.

HES · 10620442

Hes Sb:1006-F-12/24D-629-Lbsm - 10620442

When you need a fail-secure electric strike that handles both 12VDC and 24VDC systems without swapping power supplies, the HES 1006 series delivers

• Dual 12/24V DC field-selectable input eliminates power supply swaps on mixed-voltage installs.
• UL 1034 and UL 10C (3-hr fire) listed; 1,500 lb static strength for perimeter door compliance.
• Integrated LBSM delivers real-time latch status to access control panels without add-on hardware.

HES · 10620439

Hes Sb:1006-F-12/24D-606-Lbsm - 10620439

• Runs on 12V or 24V DC, eliminating separate SKUs across multi-voltage sites.
• Fail-secure mode keeps door locked during power loss—critical for secure perimeters.
• Latchbolt monitor delivers real-time door position feedback to access control panels.

HES · 10620436

Hes Sb:1006-F-12/24D-630-Lbsm - 10620436

When you're specifying electric strikes for openings where fail-secure operation, dual voltage flexibility, and field-reversible handing matter, the

• 12/24V DC field-selectable input eliminates separate power supplies on mixed-voltage panels.
• LBSM monitor delivers real-time latch and door status feedback directly to access control panels.
• UL 1034 and UL 10C (3-hr fire) listed; 1,500 lb static strength across a 1,000,000-cycle rated body.

HES · 10620435

Hes Sb:1006-F-12/24D-629-Lbm - 10620435

• Dual 12/24V DC field-selectable voltage eliminates panel compatibility guesswork on retrofits.
• LBM latch bolt monitor delivers real-time door position feedback to your access control system.
• UL 1034 and UL 10C 3-hour fire-rated; 1,000,000-cycle endurance suits high-traffic deployments.

HES · 10620434

Hes Sb:1006-F-12/24D-612-Lbm - 10620434

When access control points require a fail-secure electric strike that maintains security during power loss, the HES 1006-F series delivers

• Dual 12/24VDC field-selectable voltage eliminates separate SKUs across mixed-voltage sites.
• Integrated latchbolt monitor delivers real-time door position feedback for access control systems.
• 1,500 lb static strength and 1M-cycle endurance meet UL 1034 and UL 10C 3-hr fire ratings.

HES · 10620429

Hes Sb:1006-F-12/24D-630-Lbm - 10620429

When you need a fail-secure electric strike that handles high-traffic commercial openings without constant service calls, the HES

• Dual 12/24 VDC field-selectable voltage eliminates panel compatibility issues on retrofits.
• UL 1034 and UL 10C (3-hr fire) listings satisfy code requirements for commercial openings.
• LBM latch bolt monitor delivers real-time door-state feedback for accurate access control audit trails.

HES · 10620426

Hes Sb:1006-F-12/24D-606 - 10620426

• Auto-detects 12V or 24V DC — no jumpers, simplifying mixed-panel deployments.
• UL 1034 and UL 10C (3-hr fire) listed; 1,500 lb static strength for perimeter doors.
• Rated 1,000,000 cycles with fail-safe mode; 5-year limited warranty reduces callback risk.

HES · 10620425

Hes Sb:1006-F-12/24D-605 - 10620425

When you need a fail-secure electric strike that accommodates both 12 and 24 VDC control systems without additional transformers or power supplies

• 12/24V DC field-selectable voltage eliminates separate SKUs across mixed-voltage facilities.
• UL 1034 and UL 10C (3-hr fire) listings satisfy code requirements for life-safety installations.
• 1,500 lb static strength and 1,000,000-cycle endurance rating suits high-traffic commercial doors.

HES · 10620419

Hes Sb:1006-12/24D-612-Lbsm - 10620419

When you need fail-secure control on a commercial frame without field-reversibility delays, the HES SB:1006 series delivers a symmetrical non-handed

• Dual 12/24V DC field-selectable input eliminates voltage-specific SKUs on mixed-panel projects.
• Fail-secure mode and UL 10C 3-hour fire rating meet code in life-safety and high-security openings.
• 1,500 lb static strength and 1M-cycle endurance suit high-traffic commercial and institutional doors.