Middle Atlantic FWD Vert Duct 3X3 44-45U 1PC - FWD-VPCD-3X3-44-45

Middle Atlantic FWD-VPCD-3X3-44-45 Forward Vertical Cable Duct, 3x3, 44-45U

The Middle Atlantic FWD-VPCD-3X3-44-45 is a single-piece, 3-inch-wide forward vertical cable duct designed to route and dress patch cables, power cords, and low-voltage wiring along the exterior of BGR-series open-frame and enclosed racks in 44U and 45U configurations. At 78.75 inches tall with 77 inches of usable height, this duct handles full-height rack runs without splicing — a real time-saver during structured cabling installs in security head-end rooms, IT closets, and AV equipment bays.

Overview

Vertical cable management is the unglamorous part of every rack build, but it directly determines how long the next technician spends tracing a fault or swapping a patch cable. The FWD-VPCD-3X3-44-45 addresses that by providing a dedicated 3x3-inch channel — 3 inches wide, 2.94 inches of usable depth — that keeps vertical runs separated from horizontal equipment and accessible from the front of the rack without disturbing adjacent gear. The PVC plastic construction keeps weight down (6.14 lbs shipped at 8.86 lbs with packaging) and eliminates the corrosion concerns that come with uncoated steel in humid or outdoor-adjacent installations. Mounting hardware is included, so there are no secondary hardware orders holding up the build. The forward-compatible design means this duct will carry into future BGR rack upgrades without a replacement purchase.

Key Features

• Full-height single-piece construction (78.75 in / 200 cm total, 77 in / 195.6 cm usable): A one-piece duct spanning a 44U or 45U rack eliminates mid-run splice points. Splices are where cables bunch, labels get buried, and future technicians lose time — skipping them entirely is worth it on any install you expect to touch again.
• 3x3-inch channel profile (3 in wide, 2.94 in / 7.5 cm usable depth): Wide enough to handle a realistic density of patch cables and low-voltage runs without forcing cables into tight bends that stress RJ-45 boots. The square profile also makes it straightforward to estimate fill capacity during pre-install planning.
• PVC plastic finish, black: PVC weighs roughly half what comparable steel ducts do — at 6.14 lbs, this duct won't add meaningful load to a rack that's already near its weight rating. The black finish blends with standard black rack finishes and won't show dust the way lighter colors do in working equipment rooms.
• BGR base series compatibility: Purpose-matched to Middle Atlantic's BGR open-frame and enclosed rack family. Bracket geometry, hole spacing, and mounting hardware are engineered to align with BGR rack uprights — no field-drilling, no shimming, no improvised brackets.
• Forward-compatible design: If a BGR rack gets swapped for a newer frame in the same product line, this duct carries forward. That matters in environments where rack infrastructure gets refreshed on a longer cycle than the equipment it houses — you won't be repricing cable management on the next refresh.
• Mounting hardware included (steel): The steel mounting hardware ships in the box, so installation can proceed on receipt without a separate hardware order. For integrators running parallel rack builds, eliminating parts-chase delays keeps the schedule intact.
• Rated for 44U and 45U rack heights: The 44-45 RU range means this duct fits both common full-height rack configurations without needing to stock two SKUs — relevant for shops that split installs across mixed rack inventories.
• Lightweight shipping profile (8.86 lbs / 4 kg packaged): Keeps freight costs low on multi-unit orders. When you're ordering a dozen ducts for a multi-rack head-end room build, the per-unit shipping weight adds up.

Integration & Compatibility

The FWD-VPCD-3X3-44-45 (often searched as FWD VPCD 3X3 44 45) is engineered specifically for the Middle Atlantic BGR rack family. The forward-compatible designation means it aligns with current BGR mounting geometry and is designed to remain compatible with future BGR-series frames. This duct is appropriate for use alongside vertical and horizontal cable management accessories in the same family, including finger ducts and brush-strip panels, to complete a full cable-dress scheme. For integrators building out NVR and VMS head-end racks or PoE switch enclosures, pairing this duct with matching horizontal cable managers creates a clean, serviceable cable plant that holds up to repeated moves-adds-changes. The duct accommodates patch cables, power cords, and low-voltage wiring; it is not designed as a plenum-rated raceway or for use with high-voltage conductors. Verify local code requirements for any installation in a plenum or riser-rated space.

What's in the Box

• 1x Middle Atlantic FWD-VPCD-3X3-44-45 forward vertical cable duct (PVC, black, 78.75 in)
• Steel mounting hardware (included)

Frequently Asked Questions

Q: Which rack series is the FWD-VPCD-3X3-44-45 designed to fit?

A: The FWD-VPCD-3X3-44-45 is engineered for Middle Atlantic's BGR base series. The mounting hardware and bracket geometry are matched to BGR rack uprights. Verify compatibility with non-BGR frames before ordering.

Q: Does this cable duct cover both 44U and 45U rack heights?

A: Yes. The FWD-VPCD-3X3-44-45 is rated for both 44U and 45U rack configurations. At 78.75 inches total height with 77 inches of usable channel, it spans a full-height rack in either configuration without splicing.

Q: Is the mounting hardware included, or does it need to be ordered separately?

A: Steel mounting hardware is included in the box. No separate hardware order is required for a standard BGR rack installation.

Q: What is the usable depth of the cable channel?

A: The usable depth is 2.94 inches (7.5 cm). Combined with the 3-inch width, this provides a 3x3-inch cross-section for routing patch cables, power cords, and low-voltage wiring.

Q: Is this duct forward-compatible with future BGR rack upgrades?

A: Yes. The forward-compatible designation means the FWD-VPCD-3X3-44-45 is designed to remain compatible with future BGR-series rack frames, so you won't need to replace the duct when upgrading rack hardware.

Q: What material is the duct made from, and how much does it weigh?

A: The duct body is PVC plastic with a black finish. Product weight is 6.14 lbs (2.8 kg); shipping weight is 8.86 lbs (4 kg) with packaging.