Middle Atlantic FWD Vert Duct 1.5X3 44-45U 1PC - FWD-VPCD-1X3-44-45

Middle Atlantic FWD-VPCD-1X3-44-45 Forward Vertical Cable Duct

The Middle Atlantic FWD-VPCD-1X3-44-45 is a 1.5-inch-wide by 3-inch-deep forward-facing vertical cable duct designed specifically for 44- and 45U BGR-series racks. At 77 inches of usable height and built from PVC with a black finish, it gives integrators a clean, enclosed cable routing path from top to bottom of a full-height rack — without improvising with zip-tie trays or open ladder duct that creates service headaches later. If you're building out a BGR-frame rack and need a tidy cable management solution for the vertical run, this is the part.

Key Features

• 77 in Usable Height: The 77-inch usable channel (195.6 cm) spans virtually the entire interior of a 44-45U rack, so vertical cable runs don't dead-end partway up the frame and force awkward horizontal jogs.
• 1.5 in x 3 in (2.94 in Usable Depth) Channel: The 1.5-inch-wide by 2.94-inch usable-depth duct handles moderate bundle diameters — suitable for power cords, CAT6 runs, and fiber patch cables in mid-density deployments. Size up if you're running heavy copper bundles in a fully loaded 45U frame.
• PVC Construction: PVC is non-conductive and corrosion-proof — the right call for a cable duct that will be in contact with patch cables and power cords over the life of the rack. No rust risk in humid equipment rooms or light industrial environments.
• BGR Base Series Compatibility: Engineered for Middle Atlantic's BGR rack family. This isn't a generic duct — it mounts correctly against BGR vertical rails without shimming or custom hardware, saving installation time and ensuring a flush fit.
• Forward Compatible: Marked forward compatible, meaning it integrates with current BGR rack configurations and is designed to work with future frame updates in the BGR line — relevant for phased deployments where the rack may be expanded or reconfigured.
• Single-Piece Construction (1PC): Ships as one continuous piece rather than a segmented assembly. No mid-run seams to catch cables during pulls, and no alignment work when mounting. Total unit weight is 5.23 lbs, so it's manageable for a one-person install.
• Mounting Hardware Included: Steel mounting hardware ships with the duct, so you're not sourcing fasteners separately. Confirmed in evidence: mounting hardware is included in the package.

Integration and Compatibility

The FWD-VPCD-1X3-44-45 (often searched as FWD VPCD 1X3 44 45) is designed for Middle Atlantic BGR-series racks and is part of the broader vertical cable management line. It is not a universal-fit duct — verify your rack is BGR-series before ordering. If you are planning a structured rack build, pair this duct with a horizontal cable manager at regular intervals to prevent cable sag and maintain airflow. For larger bundle volumes in a high-density network equipment deployment, evaluate the wider duct variants in the same FWD family before committing to this 1.5-inch width.

What's in the Box

• 1x Middle Atlantic FWD-VPCD-1X3-44-45 vertical cable duct (PVC, black)
• Steel mounting hardware

Frequently Asked Questions

Q: What rack series is the FWD-VPCD-1X3-44-45 compatible with?

A: It is designed for Middle Atlantic's BGR base series racks. It is not a universal duct — confirm your rack is BGR-series before ordering.

Q: How much usable height does this duct provide?

A: The usable height is 77 inches (195.6 cm), with an overall unit height of 78.75 inches (200 cm). It is sized for 44-45U rack frames.

Q: What is the usable channel depth of this duct?

A: The usable depth is 2.94 inches (7.5 cm), with a nominal width of 1.5 inches (3.8 cm). This accommodates moderate cable bundle diameters.

Q: Does the FWD-VPCD-1X3-44-45 come with mounting hardware?

A: Yes. Steel mounting hardware is included in the package.

Q: Is this duct forward compatible with future BGR rack configurations?

A: Yes. The product is marked forward compatible, meaning it is designed to integrate with future BGR frame updates.

Q: What material is the duct made from?

A: The duct is constructed from PVC plastic with a black finish. PVC is non-conductive and corrosion-resistant.

Karl Wilson

The FWD-VPCD-1X3-44-45 is a detail that separates a rack build you're proud of from one you're apologizing for six months later. That 77-inch continuous usable channel — no seams, no mid-run joints — means cable pulls are clean end-to-end, and you're not fishing past a seam joint when you need to add a run post-commissioning.

Technical Highlights:

• 77 in Usable Height: Spans 195.6 cm of usable routing space inside a 44-45U frame — enough for full top-to-bottom vertical runs without lateral deviation.
• PVC Construction: Non-conductive material eliminates any grounding concern from duct-to-cable contact; corrosion-proof for equipment rooms with variable humidity.
• 5.23 lb Unit Weight: Light enough for a solo tech to hold in place and fasten without a second person, which matters when you're commissioning a rack in a tight IDF closet.

Deployment Considerations:

• Width is 1.5 inches nominal — adequate for light-to-medium bundle counts, but if you're routing 20+ Cat6A runs plus power in a fully loaded 45U, measure your bundle diameter before committing to this size; the FWD family includes wider variants.
• BGR-series specific: this duct will not mount cleanly on non-BGR frames. Verify your rack model before ordering — mismatched mounting points mean shimming or fabricating adapters on-site.

Best fit for BGR-based security or AV rack builds in structured wiring deployments — command centers, headend rooms, or multi-rack IDF buildouts where vertical cable discipline directly affects long-term serviceability.