Middle Atlantic Forward Small Device MNT Side CLAMP4PK - FWD-SIDECLMP-4

Middle Atlantic FWD-SIDECLMP-4 Forward Small Device Side Clamp 4-Pack

The Middle Atlantic FWD-SIDECLMP-4 is a four-pack of side clamps engineered specifically for the Forward small device mounting system — the hardware that keeps compact AV and security components locked in position without relying on rack ears or faceplate screws alone. If you're deploying Middle Atlantic rack solutions and need a clean, secure way to hold small-footprint gear, this is the clamp set to reach for.

Overview

Forward mounting systems are common in AV integration and security head-end racks where rack-mountable small devices (media converters, small NVRs, signal processors) lack standard 1U faceplates. The FWD-SIDECLMP-4 addresses this directly: side-applied clamping pressure holds devices in place laterally, independent of front-panel hardware. That matters in mobile or vibration-prone environments — and in any rack where you want serviceability without disturbing neighboring gear. The clamps ship as a four-pack, giving you enough hardware for multiple device positions in a single order, which keeps project BOMs tighter. This is a purpose-built accessory for rack accessories and mounting hardware integrators who standardize on Forward system components.

Key Features

• Four Clamps Per Pack: A single FWD-SIDECLMP-4 order provides four side clamps — enough to secure two small devices with paired lateral support, or spread across a multi-bay rack build. Reduces reorder frequency on larger deployments.
• Pantone 3015 Blue Color Coding: The distinctive blue finish (Pantone 3015) makes these clamps immediately identifiable during installation and service calls. In dense racks with mixed hardware, color-coded hardware cuts troubleshooting time when you're tracing a loose component.
• 3.67-Inch Width: At 3.67 in (9.3 cm) wide, the clamp profile is sized to span the lateral edge of compact devices within the Forward mounting footprint — confirm your device's width falls within the Forward system's published range before ordering.
• USA Manufactured: Produced in the USA (Federal Ops Country of Origin: USA), which satisfies TAA compliance requirements relevant to government and public-sector installs. Check project specifications for Buy American or TAA clauses before substituting alternatives.
• Lightweight — 1 lb Shipped: The entire four-pack ships at 1 lb (0.5 kg), so freight impact on project logistics is negligible even when ordering multiples. Useful context for international shipments — these are available internationally.
• Forward System Integration: Designed exclusively for the Middle Atlantic Forward platform. These are not universal clamps — compatibility is specific to the Forward small device mounting ecosystem, which keeps the fit precise and the installation repeatable across techs.

Integration and Compatibility

The FWD-SIDECLMP-4 is a Forward system component and is not cross-compatible with other Middle Atlantic rack families or third-party mounting systems. Pair with Forward base mounts and device trays for a complete installation. For projects specifying rack planning and cable management, confirm that your small device dimensions align with Forward system tolerances before procurement — side clamps work in conjunction with the base mounting hardware, not as a standalone solution.

What's in the Box

• 4x FWD-SIDECLMP-4 Side Clamps (Pantone 3015 Blue)

Frequently Asked Questions

Q: How many clamps are included in the FWD-SIDECLMP-4 package?

A: The FWD-SIDECLMP-4 ships as a four-pack — four individual side clamps per order.

Q: What color are the FWD-SIDECLMP-4 clamps?

A: Blue, specifically Pantone 3015. This color coding helps identify Forward system hardware in mixed-hardware rack environments.

Q: Is the FWD-SIDECLMP-4 TAA compliant?

A: The Federal Ops Country of Origin is listed as USA, which supports TAA compliance for applicable government procurement requirements. Verify with your contracting officer for project-specific compliance determinations.

Q: Will the FWD-SIDECLMP-4 work with any rack system or only Forward?

A: These clamps are designed for the Middle Atlantic Forward small device mounting platform specifically. They are not general-purpose or universal rack clamps — compatibility is limited to the Forward system.

Q: What is the width of the FWD-SIDECLMP-4?

A: Each clamp measures 3.67 inches (9.3 cm) wide.

Q: Can the FWD-SIDECLMP-4 be shipped internationally?

A: Yes, the FWD-SIDECLMP-4 is available for international shipment.

Marty Allison

The FWD-SIDECLMP-4 is a small part that solves a real problem on Forward system builds — specifically the challenge of securing small-footprint devices that don't have standard rack ears. At 3.67 inches wide and shipping at just 1 lb for the full four-pack, this is the kind of hardware you want spec'd into your BOM before the rack goes live, not sourced as an afterthought when a device is rattling loose during commissioning.

Technical Highlights:

• Pantone 3015 Blue Finish: Color-coded hardware isn't just cosmetic — in a dense head-end rack with 10+ devices, being able to spot Forward system clamps by color alone saves real time during service calls and post-installation audits.
• Four-Pack Quantity: Two devices with paired side clamping per order. On multi-bay builds or phased deployments, ordering in four-packs keeps your parts inventory aligned with actual installation increments rather than buying singles.
• USA Country of Origin: Federal Ops COO is USA — relevant for public-sector and government projects with TAA or Buy American requirements where hardware provenance documentation is part of project closeout.

Deployment Considerations:

• These clamps are Forward-system-specific. Don't attempt to adapt them to other Middle Atlantic rack families or third-party systems — the geometry won't translate and you'll end up with an unsecured device.
• Side clamps work in tandem with Forward base mounting hardware, not independently. Ordering clamps without confirming the base mount and tray configuration is already in the BOM is a common procurement gap on first-time Forward builds.

The FWD-SIDECLMP-4 is the right call for integrators standardizing on the Forward platform in commercial AV or security head-end racks — particularly on government or public-sector projects where USA-made hardware and TAA-supportable components are a procurement requirement rather than a preference.