Panduit T70FH4IW Surface Raceway Faceplate for T-70 Series

The Panduit T70FH4IW is a four-port snap-on faceplate engineered for horizontal sloped T-70 surface raceway installations. Designed to terminate telecom, data, fiber, and A/V runs in commercial environments, this faceplate accepts four Panduit Mini-Com modules and mounts directly to T-70 raceway without additional brackets or screws. The sloped profile creates a natural wire-exit angle that reduces bend radius strain on Category 6A, OM4, and hybrid cable assemblies routed through the raceway channel. Off-white PVC construction meets UL5A and CSA 22.2 No.62-93 standards for plenum and non-plenum applications. Integrators use this faceplate to build modular drop points in conference rooms, datacenter hot aisles, IDF closets, and retail back-of-house areas where surface-mount infrastructure is the only viable option.

Key Features

Four-port capacity for Panduit Mini-Com modules (voice, data, fiber, A/V inserts sold separately)

Snap-on horizontal sloped design — no mounting screws or additional hardware required

Engineered for T-70 raceway series — guaranteed fit with 1.38" × 0.75" channel dimensions

Sloped exit geometry reduces cable bend radius violations on high-performance copper and OM3/OM4 fiber

Off-white PVC finish matches standard wall plate and raceway aesthetics in office environments

UL5A Listed and CSA 22.2 No.62-93 certified for code-compliant installations

RoHS compliant — meets municipal e-waste and procurement requirements

114.3mm W × 69.8mm H footprint — comparable to dual-gang wall plate coverage

This faceplate solves the three most common T-70 raceway deployment challenges: module retention, wire-exit strain, and field-installable flexibility. The snap-on mechanism anchors the faceplate to the raceway channel with a positive lock — installers hear an audible click when the unit seats correctly, and the faceplate stays secure under repeated plug/unplug cycles from patch cords and ST/LC connectors. The sloped design creates a 15° wire-exit angle that keeps Category 6A patch cords above the minimum bend radius threshold (4× cable diameter per TIA-568.2-D) even when the raceway runs tight against a wall or cubicle partition. The four-port layout supports mixed-media terminations — a typical install might populate two ports with RJ45 copper jacks for PoE++ endpoints (90W Type 4), one port with LC duplex fiber for backbone uplink, and one port with 3.5mm A/V insert for conferencing audio. All four module bays accept the full Mini-Com catalog (UTP, STP, fiber, coax, A/V, blank) without adapter plates or filler panels.

Integrators deploy the T70FH4IW in environments where drilling into walls or pulling cables through conduit isn't feasible: leased office space with no-penetration clauses, historic buildings with masonry walls, retail tenant improvements with 90-day turnaround windows, and datacenter retrofit projects where existing cable trays can't accommodate additional homerun capacity. The faceplate mounts at any point along a T-70 horizontal run — common practice is to install faceplates every 10–12 feet in open-plan offices to create drop zones for desk phones, IP cameras, wireless APs, and digital signage displays. The off-white finish blends with standard office color palettes and can be field-painted to match custom wall colors without affecting UL/CSA ratings. PVC material resists impact damage from rolling carts, chair collisions, and janitorial equipment — the faceplate won't crack under the same loading conditions that shatter brittle ABS wall plates.

UL5A and CSA 22.2 No.62-93 listings mean the T70FH4IW meets the same fire-propagation and toxicity standards as plenum-rated cable — critical for installations in return-air spaces, above drop ceilings, and in municipal buildings with strict fire code enforcement. RoHS compliance satisfies procurement requirements for government contracts, university projects, and corporate sustainability programs. The faceplate ships in cartons of 10 units, and each unit is individually packaged to prevent scratches during shipping. Pair with Panduit Mini-Com modules, T-70 raceway channel, and internal/external corner fittings to build a complete surface-mount cabling system that meets TIA, ISO/IEC, and NEC installation standards without exposing cables or disrupting finished wall surfaces.