Panduit UVP072 SteadySine External Battery Pack
Overview
The Panduit UVP072 is a 72V 9Ah external battery pack built for the Panduit SteadySine UPS line, specifically the U03S12V, U03S11V, U03N12V, and U03N11V models. If your facility runs continuous-duty loads — edge switches, access control panels, IP cameras, or small NVRs — and your existing UPS runtime doesn't cover the gap between a power event and generator pickup, the UVP072 is the direct extension path without replacing the UPS chassis. At 3.4 inches tall and 17.3 inches wide, it slides into a standard 2U rack space, keeping your power infrastructure tidy alongside your network and security gear.
Key Features
- 72V, 9Ah Rated Capacity: The 72V battery string is matched to the SteadySine inverter architecture — you're not bridging voltage mismatches with adapters or converters. Capacity at 9Ah means meaningful runtime extension for sub-2kVA loads; the actual added minutes depend on your connected load, but pairing one UVP072 with a U03S12V on a 500W load delivers a measurable buffer well beyond the internal pack alone.
- Direct Compatibility — No Configuration Required: The UVP072 is designed exclusively for U03S12V, U03S11V, U03N12V, and U03N11V UPS units. Plug-and-play within the SteadySine family means the UPS management software recognizes the extended capacity automatically — no firmware update, no manual capacity recalibration needed at installation.
- 1U Rack Form Factor (3.4" H × 17.3" W): At 86.5mm tall, this unit fits a standard 19-inch rack in 2U. If your wiring closet or IDF is already dense with patch panels and switches, the compact footprint means you're not sacrificing a half-rack bay just to extend runtime. Mount it directly below or above the parent UPS to keep battery cabling short.
- Drop-In Runtime Extension Without UPS Replacement: Replacing a UPS mid-deployment to gain runtime means downtime, re-cabling, and re-testing. The UVP072 preserves your existing SteadySine investment — add capacity as load grows or runtime requirements change, without touching the UPS itself.
- Cross-Reference Compatibility: The UVP072 is a direct functional replacement for the Eaton 5PXEBM72RTG2 and APC SRT96RMBP in deployments where the Panduit SteadySine UPS is the base unit. If you're evaluating against those SKUs, confirm your UPS model is in the U03S/U03N family before ordering any of them.
- SteadySine Sub-Brand Lineage: SteadySine denotes Panduit's double-conversion online UPS architecture — pure sine wave output on both battery and mains. The UVP072 is rated for this architecture specifically; it is not a generic VRLA pack and should not be cross-applied to other UPS platforms outside the compatible model list.
Integration & Compatibility
The UVP072 integrates directly with the following Panduit UPS battery systems and accessories: U03S12V, U03S11V, U03N12V, and U03N11V. These are rackmount double-conversion online UPS units in the SteadySine product family. If you are running a different Panduit UPS model or a third-party UPS, the UVP072 is not compatible — voltage and connector specifications are specific to this family. For multi-pack configurations, consult the parent UPS documentation for the maximum number of external packs supported per unit; the UPS management interface will reflect aggregate runtime once the pack is connected.
For facilities running edge security infrastructure — IP cameras, NVRs, PoE switches, and access control hardware — pairing the UVP072 with a SteadySine UPS provides the runtime bridge that keeps cameras recording and doors unlocked through short utility outages. This is the architecture most commonly deployed in intermediate distribution frames (IDFs) and security equipment rooms where generator backup is present but transfer time creates a gap.
When evaluating runtime requirements for your deployment, reference the UPS runtime and power planning guide to size your battery extension correctly against connected load.
Frequently Asked Questions
Q: Which UPS models is the UVP072 compatible with?
A: The UVP072 is designed for use with Panduit SteadySine UPS models U03S12V, U03S11V, U03N12V, and U03N11V. It is not compatible with other Panduit UPS families or third-party UPS units.
Q: How many UVP072 battery packs can I connect to a single UPS?
A: The maximum number of external battery packs per UPS unit is defined in the parent UPS documentation. The UVP072 evidence does not specify a per-UPS pack limit — consult the U03S/U03N installation guide for your specific model.
Q: What are the physical dimensions of the UVP072?
A: The UVP072 is 3.4 inches (86.5mm) tall and 17.3 inches (440mm) wide, designed to fit in a standard 19-inch equipment rack.
Q: Is the UVP072 a hot-swappable battery?
A: Hot-swap capability is not confirmed in the available product evidence. Refer to the Panduit SteadySine UPS installation documentation for battery replacement procedures before attempting a live swap.
Q: What is the UVP072 a replacement for from other brands?
A: The UVP072 is cross-referenced as a functional equivalent to the Eaton 5PXEBM72RTG2 and APC SRT96RMBP in deployments running a compatible Panduit SteadySine UPS as the base unit.
The UVP072 comes up frequently in IDF and security equipment room builds where the SteadySine UPS is already in place but the original runtime spec falls short of the facility's generator transfer time. At 72V and 9Ah, this pack is purpose-matched to the SteadySine inverter — not a universal VRLA that happens to fit a connector, which matters when you're counting on the UPS management layer to accurately report aggregate runtime to your monitoring system.
Technical Highlights:
- 72V Architecture Match: The 72V string voltage is native to the SteadySine double-conversion design. Correct voltage matching means the UPS inverter doesn't have to compensate for a mismatched pack, preserving output sine wave quality — critical for IP cameras and NVRs with switching power supplies sensitive to waveform distortion.
- 1U Rack Profile (3.4" / 86.5mm): In a packed IDF with patch panels, PoE switches, and the parent UPS all competing for rack space, a 3.4-inch unit is the difference between fitting in an existing cabinet and ordering a new one. Mount it adjacent to the UPS to keep battery interconnect cable length minimal.
- Direct Cross-Reference to Eaton 5PXEBM72RTG2 and APC SRT96RMBP: If you're quoting a replacement in a mixed-brand facility, the UVP072 is the Panduit-sourced equivalent — confirm the base UPS is a U03S/U03N model before substituting.
Deployment Considerations:
- The compatible UPS list is hard-limited to U03S12V, U03S11V, U03N12V, and U03N11V — verify the exact model on the UPS nameplate before ordering. A UPS model number that looks similar but isn't on this list will not support the UVP072 without manufacturer confirmation.
- Runtime calculations must account for actual connected load, not UPS nameplate VA rating. A 1500VA UPS running at 60% load will deliver meaningfully more runtime per pack than the same UPS at 90% load — get your watt-hour budget from the load meter, not the spec sheet.
The UVP072 is the right call for security IDF builds running Panduit SteadySine UPS hardware where generator transfer time exceeds the internal battery runtime — specifically facilities with IP camera systems, access control panels, and edge network gear that cannot tolerate even a 30-second power gap during utility events.
