Vertiv GL42UEX-60120W-MS-SP 42U 600x1200mm White Shock Pallet Rack Enclosure
Overview
The Vertiv GL42UEX-60120W-MS-SP is a 42U rack enclosure in a 600mm wide by 1200mm deep white finish, built with an integrated shock pallet for environments where equipment must survive transit — from staging areas to final data center deployment. If your project involves pre-loading servers, switches, or UPS units off-site and then shipping the loaded rack to the destination, the shock pallet feature addresses the single biggest risk in that workflow: vibration and impact damage during transport. This is not a stripped rack shell — it is purpose-configured for the move-and-install use case common in enterprise rollouts, branch deployments, and colocation hand-offs. The GL42UEX-60120W-MS-SP (often searched as GL42UEX 60120W MS SP) comes from Vertiv's EX enclosure line, sourced direct from the manufacturer.
Key Features
- 42U Capacity: Forty-two rack units of usable space lets you populate a full server stack — compute, top-of-rack switching, patch panels, and power distribution — in a single enclosure. That matters when your project is standardizing across multiple sites: one SKU, one floor plan, one cable run per rack.
- 600mm Width: The 600mm external width fits within standard aisle spacing and accommodates typical 19-inch equipment without side clearance issues. Wider 800mm cabinets are available in the EX family if you need cable trays or side-mounted PDU runs — but most 1U/2U servers and switches fit comfortably in 600mm.
- 1200mm Depth: At 1200mm depth, this enclosure handles full-depth servers (most 2U rack servers run 700–900mm) and leaves meaningful rear space for cable management and rear-mounted PDUs. Shallow 900mm racks force cable compromise; at 1200mm that pressure is removed.
- White Finish: The white powder-coat finish is the distinguishing visual marker for specific deployment environments — clean rooms, healthcare data closets, and some broadcast facilities where white enclosures are specified by the facilities team or required by standards. If your environment calls for standard grey/black, Vertiv offers the same chassis in alternate finishes within the EX line.
- Integrated Shock Pallet: The shock pallet is the defining specification of this SKU. It absorbs vibration and impact during forklift handling and freight transit, protecting pre-loaded equipment. Without a shock pallet, a loaded rack in transit is vulnerable to hard drive failures, loosened cable connections, and chassis damage. This matters most on staged deployments where the rack ships fully populated from an integration facility to the final site.
Integration & Compatibility
The GL42UEX-60120W-MS-SP follows standard 19-inch EIA-310 rack unit specifications, making it compatible with server, networking, and storage equipment from all major manufacturers. The 1200mm depth accommodates rear cable management channels and rear-mount power distribution units typical in structured data center infrastructure deployments. As part of the Vertiv rack enclosure catalog, this model is designed to integrate with Vertiv's own PDUs, cable managers, and airflow blanking panels, which simplifies BOM consistency when standardizing across a multi-rack deployment. For UPS and power management planning, confirm your PDU rail depth against the 1200mm interior before ordering rear-mount units. The white finish does not affect grounding, bonding, or thermal performance relative to the standard-color EX variants.
Frequently Asked Questions
Q: What is the shock pallet on the GL42UEX-60120W-MS-SP and why does it matter?
A: The shock pallet is a built-in vibration and impact absorption platform integrated into the base of the enclosure. It protects pre-loaded equipment during forklift handling, pallet jack movement, and freight transit — reducing the risk of hard drive failure, loosened connections, and mechanical damage when shipping a populated rack from a staging facility to the final installation site.
Q: Is the GL42UEX-60120W-MS-SP 42U of usable rack space?
A: Yes, the GL42UEX-60120W-MS-SP provides 42U of usable rack space in a 600mm wide by 1200mm deep enclosure, consistent with standard 19-inch EIA-310 equipment mounting.
Q: Why is this rack white instead of the standard black or grey?
A: The white finish is specified for environments where it is required — clean rooms, certain healthcare data closets, broadcast facilities, and some corporate deployments where facilities management mandates white enclosures. If your site does not require white, Vertiv offers the EX series in standard color finishes.
Q: What type of equipment fits in a 600x1200mm rack?
A: The 600mm width accommodates standard 19-inch rack-mount equipment. The 1200mm depth is sufficient for full-depth servers (typically 700–900mm), rear cable management, and rear-mount PDUs. Most 1U and 2U servers, switches, patch panels, and UPS units in this depth range will fit without modification.
Q: Can I use this enclosure for a non-transit application?
A: Yes. The shock pallet adds transit protection but does not affect use as a permanent stationary enclosure. Once installed at the final site, the rack functions as a standard EX series enclosure. The shock pallet is a feature, not a limitation.
The GL42UEX-60120W-MS-SP is the right answer when the rack needs to travel before it lives — the integrated shock pallet is specifically what separates this SKU from a standard EX enclosure of the same 42U, 600x1200mm footprint. For staged deployments where racks are populated at an integration facility and then freighted to the final site, this is where the spec pays off: loaded racks without shock protection are a meaningful source of DOA equipment on arrival.
Technical Highlights:
- 42U / 600x1200mm Form Factor: Full 42U height in a 600mm wide by 1200mm deep footprint — deep enough for full-depth servers and rear PDU runs, narrow enough for standard aisle plans without special clearance.
- Integrated Shock Pallet: Transit-rated shock absorption built into the enclosure base, not an aftermarket addition. Equipment loaded and shipped inside this rack has mechanical protection against the impact and vibration profiles of standard LTL freight handling.
- White Finish: The white powder coat is a controlled-environment specification detail — not an aesthetic choice. Healthcare data closets, broadcast production environments, and clean-room-adjacent installations frequently mandate white enclosures; this SKU satisfies that requirement within the Vertiv EX line.
Deployment Considerations:
- Confirm your PDU rear-mount depth before ordering — the 1200mm interior gives ample space, but rear-mount PDUs vary from 50mm to 200mm in projection depth and should be accounted for in the cable management plan.
- The shock pallet occupies floor space at the base; verify clearance on the destination floor plan if the rack is going into a tight row end-cap position or under a low ceiling segment during the move-in phase.
This enclosure is best positioned for enterprise branch rollouts, colocation hand-offs, and multi-site standardization projects where racks are staged centrally and shipped populated — exactly the scenarios where transit damage is the highest-cost risk in the deployment workflow.
