Vertiv GL42UEX-80120B-MS-SP 42U 800x1200mm Black Rack Enclosure with Shock Pallet

Overview

The Vertiv GL42UEX-80120B-MS-SP is a 42U EX-series server rack enclosure built for data center and enterprise deployments where both long-term cabinet performance and damage-free equipment transport are non-negotiable. At 800mm wide and 1200mm deep, this enclosure is sized for high-density server, storage, and networking gear — and the factory-integrated shock pallet means you're not retrofitting vibration protection at receiving; it ships ready to survive the freight leg without risking the hardware inside. If you've ever taken delivery of a rack that arrived with bent rails or shifted hardware, the shock pallet inclusion here is a meaningful specification, not a marketing footnote. Explore the full Vertiv rack and infrastructure line to find compatible power distribution, cooling, and cable management accessories.

Key Features

• 42U Form Factor: 42U of usable rack space is the standard footprint for a fully populated enterprise server rack. You can fit a dense mix of 1U and 2U servers, patch panels, KVM switches, and top-of-rack network gear without running out of vertical real estate mid-project. This is the size to spec when you're building a full-server stack rather than a partial fill.
• 800mm Width: The 800mm wide footprint provides the clearance needed for high-density cable runs and side-by-side airflow management. Standard 19-inch rackmount equipment fits centered with room for structured cabling trays on both sides — important when you're running structured cabling bundles through the enclosure without restricting cooling airflow.
• 1200mm Depth: A 1200mm depth accommodates even the longest 2-post and 4-post rail kits on the market, including extended-depth blade chassis and high-density storage arrays. Shallower 1000mm racks force you to choose equipment more carefully; at 1200mm, nearly every enterprise server ships with a compatible rail kit.
• 2000mm Height: At 2000mm tall, this enclosure fits under a standard 7-foot raised-floor ceiling with clearance for top-mounted PDUs or cable managers. Verify ceiling height in your data hall before ordering — 2000mm is the common data center height, but some colocation cages or older machine rooms run tighter.
• Shock Pallet Inclusion: The integrated shock pallet is the defining specification of the GL42UEX-80120B-MS-SP variant. Shock pallets use a controlled-deformation mount system to absorb fork-lift impacts, rough dock loading, and trucking vibration before they reach the cabinet frame and installed equipment. For pre-populated racks shipping to remote sites, branch offices, or colocation facilities, this is substantially lower risk than strapping a standard cabinet to a wooden pallet.
• 646 lb Shipping Weight: At 646 lbs, this is a floor-loading and logistics consideration before it's a deployment consideration. Verify your raised floor's point-load rating and confirm your freight dock has appropriate lift equipment. Most enterprise data centers spec 150–250 lbs per square foot; a populated 42U rack can push that ceiling, so weight planning starts at rack selection, not rack installation.
• Black Finish: The black powder-coat finish is standard for enterprise data center and colocation environments. It provides a consistent aesthetic in mixed-vendor deployments and reduces visible dust accumulation between scheduled cleaning cycles compared to lighter finishes.
• EX Series Architecture: The EX series is Vertiv's full-featured rack enclosure line designed for server rack deployments in production data centers. The enclosure is engineered for compatibility with Vertiv's accessory ecosystem, including power distribution units, blanking panels, cable managers, and side panels — reducing the vendor-juggling that comes with mixing rack brands and accessory lines.

Integration and Compatibility

The GL42UEX-80120B-MS-SP follows standard 19-inch EIA-310-D rackmount specifications, so it accepts equipment from any major server, storage, or networking vendor. The 1200mm depth is compatible with extended-depth rail kits from Dell, HPE, Cisco, and Lenovo, among others. For PoE switching, UPS integration, or cable management accessories, pair this enclosure with compatible rack power distribution units and blanking panels to maintain front-to-back airflow integrity. The shock pallet ships as part of the enclosure unit — no separate assembly or sourcing required before the freight leg.

For high-density deployments, consider pairing this enclosure with overhead cable management or in-row cooling accessories to keep the 1200mm depth from becoming a cable-management liability at the rear of the cabinet. Vertiv's accessory compatibility is documented at the series level, so verify specific accessory part numbers against the EX series compatibility matrix before ordering.

Frequently Asked Questions

Q: What does the shock pallet on the GL42UEX-80120B-MS-SP actually protect against?

A: The shock pallet is a controlled-deformation mounting system that absorbs impact energy from forklift handling, dock loading, and freight vibration during transport. It's designed for pre-populated rack shipments to remote sites or colocation facilities where rough handling is likely and installed equipment cannot be re-seated on arrival.

Q: Will standard 19-inch rackmount equipment fit in this enclosure?

A: Yes. The GL42UEX-80120B-MS-SP follows standard 19-inch EIA-310-D rackmount specifications and accepts equipment from any major vendor. The 1200mm depth accommodates extended-depth rail kits for blade servers, dense storage arrays, and other deep chassis.

Q: Is 800mm width necessary, or will a 600mm enclosure work for my deployment?

A: The 800mm width is the right choice when you're running high-density structured cabling bundles, side-mounted accessories, or airflow management components alongside rackmount equipment. If your deployment is lightly cabled or uses top-entry cabling only, a 600mm enclosure may suffice — but 800mm gives you the cable management real estate to keep your installation serviceable long-term.

Q: What is the shipping weight of the GL42UEX-80120B-MS-SP?

A: The unit ships at 646 lbs. Confirm your freight dock has appropriate lift equipment and that your raised floor or concrete slab meets the point-load rating for this enclosure before and after population with server equipment.

Q: Does the shock pallet remain installed after delivery, or is it removed?

A: The shock pallet is a transport accessory. It is typically removed after delivery and placement — the enclosure is then leveled and anchored using the standard floor-mounting provisions built into the EX series cabinet frame.