Panduit WMPV45EPB1 NetRunner 45RU End Panel Cover
Overview
The Panduit WMPV45EPB1 is the end panel enclosure for NetRunner™ WMPV45E vertical cable managers, designed to close off the exposed row end in open-frame rack rows. At 45 RU and 80.6 inches tall, it seals the side of your cable management run — protecting routed cables from accidental contact, reducing snag risk during adjacent equipment moves, and giving the installation a clean, finished appearance. This is a purpose-built structural accessory, not a generic cover: it ships as a two-piece metal panel assembly in black, engineered specifically for WMPV vertical cable routing configurations.
If you're running Panduit NetRunner vertical cable managers in a multi-rack data center row, the WMPV45EPB1 is the correct termination piece for the row end. Without it, the cable channels remain open on the aisle-facing side — an ongoing snag and containment liability that this panel resolves permanently.
Key Features
- 45 RU Height Coverage (80.6 in / 2,048 mm): Matches full-height 45U open-frame rack deployments exactly. No trimming, no gaps — the panel runs floor-to-top-of-rack on a standard 45U column, which means cable protection extends the full vertical run rather than leaving the top or bottom exposed.
- Two-Piece Metal Panel Design: The split construction reduces individual carton size, which translates to a lower damage risk during shipping and easier handling on-site by a single installer. Instead of wrestling an 80-inch single-piece panel into position in a tight data hall, each half is manageable by one person.
- Purpose-Matched to WMPV Vertical Cable Managers: The WMPV45EPB1 is explicitly designed for use with WMPV-series vertical cable routing — it's not a universal cover pressed into service. That means the bracket geometry, mounting points, and face profile align with the NetRunner™ system without shimming or field modification.
- Metal Construction in Black (RAL-matched to NetRunner™): Metal rather than plastic matters in active data centers: it won't warp under sustained heat loading in enclosed hot-aisle/cold-aisle containment rows, and the black finish matches standard NetRunner™ hardware so the end of your cable row looks intentional rather than patched.
- RoHS-Compliant: Meets the EU Restriction of Hazardous Substances directive — relevant for enterprise deployments with environmental procurement requirements or facilities operating under ISO 14001 environmental management standards. Verified on this SKU.
- Single-Unit Packaging (Package Qty: 1): Ordered per panel — useful when a row already has one end closed and only the open end needs coverage, so you're not buying pairs when you need one.
Integration and Compatibility
The WMPV45EPB1 is engineered specifically for vertical cable management systems in the NetRunner™ WMPV45E family. Before ordering, confirm your vertical cable manager model matches the WMPV series — this panel is not cross-compatible with WMPF flat-wall or WMPH horizontal manager lines. It fits standard 45RU open-frame rack rows where WMPV-series vertical managers are already installed along the rack column.
For infrastructure planners specifying a full row build-out, pair this end panel with the matching Panduit NetRunner cable management accessories — top and bottom caps, cable fingers, and horizontal managers — to complete the containment picture. For rack power distribution and structured cabling in the same row, see the broader racks and enclosures category for complementary hardware.
This panel ships as a standalone unit at Package Qty 1. If you are closing both ends of a row simultaneously, order two units. Width is 10.36 inches (263 mm), which determines the footprint extension at the row end — account for this in your floor plan if aisle width is constrained.
Frequently Asked Questions
Q: What cable manager models is the WMPV45EPB1 compatible with?
A: The WMPV45EPB1 is designed for use with Panduit WMPV45E vertical cable managers in the NetRunner™ series. It is not specified for use with other WMPV heights or horizontal manager lines.
Q: Does the WMPV45EPB1 come as a pair or a single panel?
A: It ships as a single unit (Package Qty: 1). If you need to close both ends of a cable manager row, order two units.
Q: What are the exact dimensions of the WMPV45EPB1?
A: The panel is 80.6 inches (2,048 mm) tall and 10.36 inches (263 mm) wide. It covers a full 45RU height run.
Q: Is the WMPV45EPB1 RoHS compliant?
A: Yes. The WMPV45EPB1 is listed as RoHS-compliant per Panduit's product data for this SKU.
Q: Why is this panel a two-piece design instead of a single piece?
A: The two-piece construction reduces carton size, lowering the risk of shipping damage and making on-site handling easier — an 80-inch single-piece metal panel is unwieldy in tight data center aisles.
Q: What material is the WMPV45EPB1 made from?
A: Metal, finished in black. Metal construction is preferable to plastic in hot-aisle/cold-aisle containment environments where sustained heat could cause plastic to warp over time.
The WMPV45EPB1 is one of those parts that data center project managers either spec correctly from the start or chase down as a punch-list item on day one of commissioning. At 80.6 inches tall — spanning the full 45RU run — this metal end panel closes the open row-end of a NetRunner WMPV cable management column. It's not decorative: open cable channels at aisle ends are a genuine liability during equipment moves, and this panel eliminates that exposure with hardware that's matched to the WMPV geometry.
Technical Highlights:
- 80.6 in / 2,048 mm Height: Exact match for 45RU open-frame rack rows — no field cutting, no exposed gap at the top of the run where cables would otherwise hang into the hot aisle.
- Two-Piece Metal Construction: Reduces per-carton weight and handling difficulty in tight data halls. A single 80-inch metal panel is a two-person lift in most aisle widths; the split design makes single-installer positioning practical.
- RoHS Compliance: Verified on this SKU — relevant for enterprise procurement teams with environmental materials requirements under EU RoHS or equivalent corporate standards.
Deployment Considerations:
- Width is 10.36 inches (263 mm) — add this to your row-end floor plan clearance calculation if your hot-aisle containment doors have tight tolerances to the last rack in the row.
- This panel is keyed to the WMPV45E specifically. Confirm your vertical manager model before ordering — it will not retrofit onto WMPF or horizontal-manager configurations without modification.
This is the right spec for enterprise data center rows running NetRunner WMPV45E vertical managers where end-of-row cable exposure needs to be closed out cleanly — particularly in hot-aisle/cold-aisle containment builds where open panel edges would compromise containment integrity.
