ELO Touch E369922 100W USB-C Power Supply Kit for I-Series
Overview
The ELO Touch E369922 is a 100W USB-C power supply purpose-built for the ELO I-Series touchscreen display line. This accessory delivers regulated power via USB-C connectivity, eliminating the need for legacy power connectors and streamlining cable management in retail, kiosk, and industrial environments where modern interface standards matter. The 100W capacity supports I-Series displays and their integrated peripherals—card readers, thermal printers, biometric sensors—without requiring separate power branches.
Key Features
- 100W Output Power: Sufficient headroom for I-Series displays plus ancillary devices. Avoid underpowered supplies that force throttling or resets during peak load—this wattage budget prevents that failure mode entirely.
- USB-C Connectivity: Modern, reversible connector eliminates insertion errors and physical wear common with legacy barrel connectors. Supports hot-swap capability without shutdown, a real advantage in continuous-operation retail or hospitality kiosks.
- I-Series Compatibility: Validated for the full ELO I-Series portfolio. Verify your specific I-Series model number against ELO's compatibility matrix before ordering if you operate mixed hardware generations.
- Factory-New Condition: Direct manufacturer sourcing ensures no refurbished stock, worn connectors, or parallel-import risk. Genuine ELO E369922 units only.
- US Warranty Path: Full manufacturer warranty coverage through direct sourcing channels. Support and RMA processing are handled by recognized ELO service partners, not third-party resellers.
Integration & Compatibility
This kit integrates exclusively with ELO Touch I-Series displays and related touchscreen accessories. The USB-C standard ensures forward compatibility with future I-Series revisions that maintain USB Power Delivery (USB PD) support. Confirm your I-Series model's power input specification against ELO's technical documentation before deployment—not all I-Series variants use USB-C power input.
For multi-display deployments, calculate total power demand across all connected peripherals. The 100W output is a ceiling; simultaneous thermal printing, card reader operation, and display brightness all draw from this budget. Oversizing the supply (if you upgrade displays later) costs more upfront but eliminates future power architecture rework.
Deployment Considerations
Cable length and routing matter more than integrators typically expect. USB-C power delivery over long cable runs (>10 feet) introduces voltage drop and efficiency loss. Verify your deployment scenario fits a reasonable cable run—if your display location is distant from power, consider relocating the supply or exploring wall-outlet-mounted enclosures designed for kiosk cabinets.
Heat dissipation is passive; the supply relies on ambient air circulation. Mount it in enclosed cabinets only if adequate ventilation (or active cooling) exists. Restricted airflow will cause the supply to throttle output or shut down thermally, mimicking a power failure.
This kit addresses a specific need: replacing a failed or inadequate I-Series power supply, or upgrading a legacy display to USB-C-powered I-Series hardware. It is not a universal USB-C supply; do not attempt to power non-ELO devices from it unless their power specifications exactly match 100W USB PD.
Frequently Asked Questions
Q: Is the E369922 compatible with all ELO I-Series models?
A: The E369922 is designed for I-Series displays that feature USB-C power input. Not all I-Series variants use USB-C; some older or specialized models may use alternative connectors. Verify your display model against ELO's compatibility documentation before purchase.
Q: Can I use the E369922 to power non-ELO USB-C devices?
A: The supply is validated for I-Series displays. Using it with third-party devices that support USB Power Delivery may work technically, but is not supported and risks equipment damage if power profiles do not match. Stick to ELO hardware.
Q: What is the warranty coverage on the E369922?
A: Full US warranty path through direct manufacturer sourcing. Specific warranty duration and RMA procedures are available from ELO support channels or your authorized service partner.
Q: What cable length is safe for the E369922 over USB-C?
A: USB Power Delivery maintains reliable voltage delivery up to approximately 10 feet of quality cable. Beyond that, voltage drop becomes significant. Use certified USB-C PD cables and keep runs under 10 feet when possible.
Q: Do I need a separate power supply if I upgrade my kiosk display to I-Series?
A: Likely yes. The E369922 is specific to I-Series USB-C power input. Legacy display supplies are not compatible. The cost of a new supply should be factored into your upgrade budget.
The E369922 is a straightforward but critical accessory if you're standardizing your kiosk or retail display fleet on ELO I-Series hardware. The 100W USB-C output sounds modest on paper, but it's precisely calibrated for the I-Series form factor—no wasted capacity, no undersizing risk if you're running card readers or thermal printers alongside the display.
Technical Highlights:
- 100W USB Power Delivery: Handles I-Series display plus one or two peripheral devices simultaneously. This wattage envelope is the sweet spot for retail kiosk deployments without requiring a separate power distribution board.
- USB-C Reversible Connector: Eliminates the physical failure mode of repeated barrel-connector insertions. In high-traffic retail environments, reversible connectors reduce wear and mean fewer field service calls for power connectivity issues.
- Direct Manufacturer Sourcing: Factory-new stock with full US warranty path. No refurbished units, no connector corrosion from prior use, no grey-market risk.
Deployment Considerations:
- Verify I-Series model compatibility before ordering—not all I-Series SKUs use USB-C power input. A mismatch wastes your money and creates on-site compatibility friction.
- Cable run length matters. USB Power Delivery voltage regulation degrades beyond 10 feet. If your kiosk cabinet is far from available power, plan for a relocated supply or a longer qualified PD cable run with voltage-drop testing.
- Passive thermal design means no active cooling. In an enclosed cabinet without ventilation, the supply may throttle or shut down. Ensure airflow in your mounting location.
The E369922 makes sense for fleets moving to I-Series or as a field replacement when a legacy supply fails. For single-unit kiosk replacements, bundle this into your display purchase to simplify logistics and warranty tracking. Avoid cross-powering non-ELO devices from it—the USB PD handshake is specific to ELO I-Series, and mismatches risk silent power degradation.
