Vertiv 7201E-2936-W-SQM6 37U White Server Rack Cabinet
Overview
The Vertiv 7201E-2936-W-SQM6 is a 37U rack cabinet built to Vertiv's commercial-grade Liebert cabinet line — 29 inches wide and 36 inches deep in a white finish. The 37U form factor gives you room to house a meaningful mix of 1U switches, patch panels, and compute hardware without going to a full 42U footprint, which matters when ceiling height or floor plan constraints are real factors in the deployment space. The white finish is a practical choice for lab environments, open offices, or any install where a black cabinet would visually dominate the room.
At 29 inches of usable internal width, this cabinet accommodates standard 19-inch rack-mount equipment with side clearance for vertical cable managers or power distribution units. The 36-inch depth suits most 1U and 2U switches and short-depth servers; confirm depth compatibility against your deepest chassis before ordering — some high-density GPU nodes or long UPS units may require a deeper enclosure. For the full infrastructure catalog, including deeper cabinet variants from the Vertiv product line, explore the category pages.
The white colorway (often searched as 7201E 2936 W SQM6) distinguishes this SKU from the standard black variants in the 7201E family. If your deployment calls for a black finish or a different depth, Vertiv offers parallel configurations within the same cabinet series — verify the suffix codes against your spec sheet before purchasing.
Key Features
- 37U Capacity: Houses up to 37 rack units of equipment — enough for a mid-density edge or branch deployment mixing switching, patch, and compute layers without committing to a full 42U cabinet.
- 29-Inch Cabinet Width: Standard 19-inch rail compatibility with side clearance for cable management accessories or vertical PDUs — no adapter kits required for standard rack-mount gear.
- 36-Inch Depth: Accommodates most 1U/2U network switching hardware and short-depth compute; check against chassis depth before specifying long UPS or deep GPU nodes.
- White Finish: Purpose-built for lab environments, open-office deployments, or data center aesthetics where a white enclosure is specified — matches clean-room or healthcare facility standards where black cabinets are discouraged.
Integration & Compatibility
Standard 19-inch EIA rail spacing supports rack-mount equipment from any major vendor. Pair with rack power distribution units and managed PoE switches to build out a complete edge infrastructure stack. Cable management accessories specific to the 7201E series should be confirmed against Vertiv's accessory compatibility list before ordering. For project-scale deployments requiring multiple cabinets, contact the pre-sales engineering team for a project quote with volume pricing.
Frequently Asked Questions
Q: What is the internal usable rack space of the 7201E-2936-W-SQM6?
A: The cabinet provides 37U of usable rack space on standard 19-inch EIA rails.
Q: What are the external dimensions of the 7201E-2936-W-SQM6?
A: The cabinet is 29 inches wide and 36 inches deep. Height corresponds to a 37U enclosure; refer to Vertiv's datasheet for the exact external height measurement in millimeters or inches.
Q: Is the 7201E-2936-W-SQM6 available in black?
A: This specific SKU ships in white. Vertiv offers equivalent cabinet configurations in black under different part numbers within the 7201E family — confirm the suffix code for your preferred finish.
Q: What is the cabinet depth and which equipment fits?
A: The nominal depth is 36 inches. This accommodates most standard rack-mount switches, patch panels, and short-to-mid-depth servers. Verify the chassis depth of long UPS units or high-density GPU servers before specifying.
Q: Can I add a PDU or cable manager to the 7201E-2936-W-SQM6?
A: Yes — the 29-inch width allows for vertical cable managers or PDUs alongside standard 19-inch equipment. Confirm Vertiv accessory compatibility codes for the 7201E series before ordering.
The 7201E-2936-W-SQM6 sits in an interesting spot in the Vertiv lineup — the 37U height with a 29-inch-wide, 36-inch-deep footprint is a deliberate trade-off. You get close to full-height density without the floor-space commitment of a 42U cabinet, and the white finish tells you this unit was spec'd for environments where aesthetics or facility standards matter as much as capacity.
Technical Highlights:
- 37U Capacity: Sufficient for a branch or edge stack — think top-of-rack switching, a couple of compute nodes, patch, and a 1U UPS — without requiring a full 42U enclosure that adds floor footprint and shipping complexity.
- 29-Inch Width: Fits standard 19-inch rail hardware with lateral room for vertical PDUs or cable managers — no custom mounting hardware needed for normal rack-mount gear.
- 36-Inch Depth: Covers most 1U/2U switching and short-depth server hardware; the constraint to watch is any chassis over ~32 inches of usable internal depth, which narrows your high-density GPU or long UPS options.
Deployment Considerations:
- White cabinets are commonly specified for open-office IT closets, lab environments, and healthcare installations — confirm your facility's color standards before ordering, since swapping finish post-delivery means a full return.
- At 36 inches of depth, double-check your deepest chassis before finalizing the BOM — some high-density compute or long-form UPS units require 40-plus inches of internal clearance and won't close properly in this enclosure.
For a branch office server room or an open-concept lab build where a white enclosure is specified and 37U of capacity covers the full hardware stack, the 7201E-2936-W-SQM6 is a practical fit — just size your PDU and cable management accessories against the 7201E series compatibility list before the order goes in.
