Panduit DUCT COVER W/PROTECTIVE FILM - C2WH6-F

Panduit C2WH6-F Duct Cover with Protective Film

The Panduit C2WH6-F is a 6-foot white PVC snap-on duct cover designed to close and protect 2-inch-wide wire duct installations in commercial and industrial cable management runs. A factory-applied protective film keeps the cover surface scratch-free through handling and installation, delivering a clean finished appearance from the moment the film is peeled away. If you're closing out a structured cable management tray in an equipment room, server closet, or low-voltage distribution channel, the C2WH6-F (often searched as C2WH6 F) is the standard cover for Panduit's 2-inch duct family.

Key Features

• 6 ft. / 1.8 m Length: Each piece covers a full 6 linear feet of duct run, minimizing the number of joints in a clean installation — fewer seams means a more professional finish in visible cable trays inside control rooms or equipment racks.
• 2-Inch Duct Compatibility (57.2 mm Overall Width): Sized specifically for 2-in. (50.8 mm) wide duct bodies with an overall cover width of 2.25 in. (57.2 mm) and a profile height of just 0.35 in. (8.9 mm) — fits flush without adding bulk in tight panel or rack installations where clearance matters.
• Snap-On Mount Method: Tool-free installation — the cover snaps directly onto compatible duct bodies without fasteners or adhesive, which matters during moves, adds, and changes when you need to re-route conductors without destroying the tray assembly.
• PVC Construction: The rigid PVC material resists the physical abuse of a working equipment room — incidental contact from cables, connectors, and technician traffic — while remaining light enough that a 6-foot section handles without flexing or cracking under normal installation stress.
• UL94 V-0 Flammability Rating: V-0 is the highest self-extinguishing rating in the UL 94 standard — material ignition self-extinguishes within 10 seconds with no dripping flame. In commercial installations governed by NEC or local fire codes, specifying V-0-rated duct covers is frequently a code requirement, not just a preference.
• UL Recognized, CSA Certified, CE Compliant, RoHS Compliant: Multi-jurisdictional compliance is pre-verified at the component level. UL Recognition and CSA Certification matter in US and Canadian builds; CE marks EU acceptance; RoHS compliance keeps the installation clean of restricted hazardous substances — relevant in environments with strict materials documentation requirements (healthcare, government, education).
• White (Color Code WH): The standard white finish coordinates with white duct bodies in clean drop-ceiling or surface-mount runs. Consistent color across duct body and cover gives a finished, intentional appearance in client-visible spaces like reception areas, conference rooms, and executive floors.
• Protective Film: The factory-applied film protects the cover surface during shipping, staging, and installation. Peel after mounting for a pristine surface — eliminates the scuffs and scratches that make cable management look afterthought in finished spaces.

Integration & Compatibility

The C2WH6-F is engineered to mate with Panduit's 2-inch wide wire duct product family. Confirm your duct body is a 2-in. nominal width before ordering — Panduit produces covers across multiple duct widths and the snap-on geometry is not interchangeable across sizes. The 6-ft. section length aligns with standard panel and rack heights, making full-run coverage straightforward in most equipment room layouts without field cutting.

For structured low-voltage installations — including IP camera cable runs, access control wiring, and PoE switch home-run channels — using matched duct and cover from the same Panduit product family ensures consistent mechanical retention and a compliant installation under NEC Article 362 (where applicable). Browse the full Panduit catalog for compatible duct bodies, fittings, and dividers that pair with this cover, or explore the broader cable management category for raceway, conduit, and tray options across brands.

When planning a structured cabling deployment — particularly for IP security systems with multiple camera home-runs — pairing duct covers with a solid PoE switch plan and a reviewed cable management strategy keeps the installation maintainable for the life of the system. For camera mounting and enclosure hardware that ships alongside cable management in the same project, see the security camera mounts category.

Frequently Asked Questions

Q: What duct width does the C2WH6-F fit?

A: The C2WH6-F is designed for 2-inch (50.8 mm) wide duct bodies. The cover itself measures 2.25 in. (57.2 mm) wide overall to achieve the snap-on fit. It is not compatible with 1-inch, 1.5-inch, or wider duct bodies — size-match your duct body before ordering.

Q: How does the C2WH6-F attach — does it require tools or adhesive?

A: The C2WH6-F uses a snap-on mount method. No tools, screws, or adhesive are required. The cover presses onto the compatible duct body and locks in place mechanically, making it easy to remove and reattach during cable adds or changes.

Q: What is the flammability rating and why does it matter?

A: The C2WH6-F carries a UL94 V-0 flammability rating — the highest self-extinguishing class in the UL 94 standard. Material ignition self-extinguishes within 10 seconds with no flaming drips. Many commercial building codes and project specifications require V-0 rated cable management components in occupied spaces.

Q: Is the C2WH6-F RoHS compliant?

A: Yes. The C2WH6-F meets RoHS compliance requirements, restricting the use of hazardous substances in the PVC material. This is relevant for installations in healthcare, government, and education environments with materials documentation requirements.

Q: What certifications does the C2WH6-F carry?

A: The C2WH6-F is UL Recognized, CSA Certified, CE Compliant, and RoHS Compliant — covering US, Canadian, and EU market requirements in a single SKU.

Q: How long is each piece, and how many do I need for a full rack height?

A: Each C2WH6-F section is 6 ft. (1.8 m) long. A standard 42U equipment rack is approximately 6 ft. tall, so one piece typically covers a full vertical duct run. For runs longer than 6 ft., sections butt-join end to end — plan your quantity based on total linear footage of duct to be covered.