Panduit DUCT COVER W/PROTECTIVE FILM - C1LG6-F

Panduit C1LG6-F Flush Duct Cover with Protective Film

Overview

The Panduit C1LG6-F is a 6-foot flush-style PVC duct cover designed to cap 1-inch wide wiring duct bases — a small component with outsized impact on how a finished cable management installation looks and holds up over time. At 25.4 mm wide and 31.8 mm in overall width, this cover snaps directly onto Type G, Type F, Type D, and Type FS duct bases without tools, keeping conductor bundles protected and rack or panel runs looking clean and professional. The protective film guards the cover surface during installation, which matters in environments where panels are dressed while other trades are still working nearby.

If you're sourcing from the Panduit wiring management catalog, the C1LG6-F (often searched as C1LG6 F) is the correct cover for standard 1-inch duct runs — not the wider 1.5-inch or 2-inch covers that share a similar part-number prefix.

Key Features

• 6-Foot Length per Piece: Each C1LG6-F covers 1.8 meters of duct run. In a typical telecommunications room or control panel, a single piece spans most horizontal runs without a mid-run joint — fewer seams means a cleaner assembly and fewer entry points for dust.
• Snap-On Mount — No Fasteners Required: The cover clips directly onto compatible duct bases. In high-density cable management installations where dozens of covers must be dressed after wiring is complete, tool-free snap-on installation is a real time saver versus screw-retained covers.
• PVC Base Material, Lead-Free: The PVC construction is dimensionally stable across typical indoor temperature ranges and resists the surface cracking that can develop on lower-grade covers over years of service. Lead-free material satisfies procurement requirements in healthcare, education, and government facilities that mandate RoHS-compliant components throughout the installation.
• UL94 V-0 Flammability Rating: V-0 is the strictest self-extinguishing classification under the UL94 standard — the material stops burning within 10 seconds after the flame source is removed and does not produce burning drips. In plenum-adjacent or control-room environments where local AHJs inspect flammability ratings, V-0 is the spec to have on the submittal.
• UL Recognized, CSA Certified, CE Compliant: Multi-standard recognition means the C1LG6-F can be specified without re-qualification in US, Canadian, and European projects. For integrators working across borders or submitting to a single procurement team covering multiple sites, this eliminates the need to source country-specific cover variants.
• RoHS Compliant: Full RoHS compliance is increasingly a contractual baseline, not a differentiator. Having it documented on the component simplifies declarations of conformity at project closeout — especially relevant for installations in EU member states or US federal projects with environmental material requirements.
• Flush Wiring Duct Style: The flush profile keeps the cover face even with the duct lip rather than projecting above it. In tight panel layouts where adjacent components clear by a few millimeters, a flush cover avoids interference fits that a lipped or oversized cover would create.
• Light Gray Color: Matches standard Panduit gray duct bases for a consistent panel aesthetic. Color consistency matters on installations where the owner's facilities team will be maintaining and documenting the system — mismatched covers are a common punch-list item in structured cabling inspections.
• 8.9 mm Overall Height: The low-profile height keeps the overall duct assembly compact. When mounting density is high and vertical panel space is at a premium, a low overall height preserves room for adjacent DIN rail components, terminal blocks, or cable saddles.

Integration & Compatibility

The C1LG6-F is designed for use with Panduit Type G, Type F, Type D, and Type FS duct bases in the 1-inch width class. It is not interchangeable with covers for wider duct bases — verify the duct base width before ordering. The snap-on fit is specific to Panduit duct profiles; generic or off-brand duct bases may not provide a secure retention fit even if the nominal width appears to match.

For projects running structured network cabling or security system wiring through duct, the C1LG6-F keeps conductor bundles contained and labeled runs accessible — covers can be removed and reseated without tools when future cable additions are needed. Pair with compatible Panduit duct bases sized to your conductor fill for a complete system.

Frequently Asked Questions

Q: What duct base types is the C1LG6-F compatible with?

A: The C1LG6-F is designed for use with Panduit Type G, Type F, Type D, and Type FS duct bases in the 1-inch (25.4 mm) width. It is not intended for wider duct bases.

Q: Does the C1LG6-F require tools or fasteners to install?

A: No. The C1LG6-F uses a snap-on mount method — it clips directly onto compatible duct bases without screws or adhesive.

Q: What flammability rating does the C1LG6-F carry?

A: The C1LG6-F is rated UL94 V-0, the strictest self-extinguishing classification under UL94. It is also UL Recognized, CSA Certified, CE Compliant, and RoHS Compliant.

Q: Is the C1LG6-F RoHS compliant and lead-free?

A: Yes. The C1LG6-F is explicitly lead-free and carries RoHS compliance, making it suitable for projects with environmental material requirements in the US, Canada, and EU.

Q: How long is each piece, and how many pieces are typically needed for a panel run?

A: Each C1LG6-F cover is 6 feet (1.8 meters) long. For most standard panel horizontal runs, a single piece covers the full span. Longer or vertical runs will require multiple pieces.

Q: What color is the C1LG6-F, and will it match standard Panduit duct bases?

A: The C1LG6-F is light gray, matching standard Panduit gray duct base colors for a consistent finished appearance.

Ted Perry

The C1LG6-F is the kind of component that determines whether a panel installation passes a punch-list walkthrough or generates a rework ticket. The UL94 V-0 flammability rating is the detail I look at first on any cover going into a control room or security head-end — V-0 means the material self-extinguishes in under 10 seconds with no burning drips, which is the threshold most commercial AHJs want to see documented on submittals.

Technical Highlights:

• UL94 V-0 Flammability: Strictest self-extinguishing class under UL94 — stops burning within 10 seconds, no flaming drips. Satisfies AHJ submittal requirements in control rooms, IDF closets, and plenum-adjacent panel installations without a variance request.
• Snap-On, Tool-Free Install: Clips directly onto Type G, F, D, and FS duct bases. On a 42U rack panel with 30+ duct runs being dressed simultaneously, tool-free retention meaningfully compresses the dress-and-cover phase of an installation.
• Multi-Standard Compliance (UL, CSA, CE, RoHS, Lead-Free): All four certifications on a single SKU simplifies procurement for multi-site projects spanning US, Canadian, and European facilities — no need to spec separate cover variants per region.

Deployment Considerations:

• Verify the duct base is a Panduit Type G, F, D, or FS profile before ordering — the snap-on fit is specific to Panduit geometry. Third-party duct bases with a nominal 1-inch width often have different lip profiles that won't retain the cover securely under repeated access.
• The overall height is 8.9 mm with the cover seated. In panels where DIN rail components or terminal block covers are mounted immediately above or below the duct, confirm clearance at the assembly stage — 8.9 mm is compact but not zero.

The C1LG6-F is the right call for any commercial security or structured cabling panel where the finished installation will be handed off to a facilities or IT team — the light gray color matches standard Panduit duct, the snap-on cover survives repeated cable-addition access cycles, and the V-0 rating keeps the as-built documentation clean on AHJ review.