Cradlepoint 170733-000 802.3af PoE Injector
Overview
The Cradlepoint 170733-000 is an 802.3af-compliant PoE injector with an EU-region line cord assembly. It delivers standard PoE power (up to 15.4W) over Ethernet to compatible devices without requiring separate power outlets at the endpoint. The model 170733-000 pairs specifically with the Cradlepoint 170732-001 (PoE Injector 56V base unit), extending its reach into European installations where Schuko (CEE 7/4) mains connectors are the standard. Deploy this when your network infrastructure cannot run PoE-enabled devices directly from wall power and your site requires EU-compliant cabling.
Compatibility
The 170733-000 is a line cord accessory designed for use with the Cradlepoint 170732-001 PoE injector. It supplies mains power to that base unit, which then injects 802.3af power onto network Ethernet conductors. Supports any 802.3af-powered endpoint: IP phones, wireless access points, compact network cameras, and other low-power devices drawing under 13W. Not compatible with high-power PoE+ (802.3at/bt) devices or 56V high-power injectors outside the 170732-001 family.
Installation Notes
The 170733-000 cable is 1.8 meters (5.9 feet) long—adequate for typical network cabinet-to-outlet runs. Mains end terminates in a Schuko Type F (CEE 7/4) plug rated 250V AC, appropriate for continental European electrical standards. Device end is a standard IEC 320 C5 connector (3-pin cloverleaf / Mickey Mouse plug), which mates directly to the 170732-001 injector. No tools or additional adapters required. Verify the 170732-001 unit is powered off before connecting or disconnecting the line cord.
What's in the Box
- 1x IEC 320 C5 to Schuko CEE 7/4 line cord (1.8m)
