Geovision FER5302-0S1U vs i-PRO S4556LA: Specification Comparison
Both the Geovision GV-FER5302-0S1U and the i-PRO WV-S4556LA are 5MP outdoor fisheye cameras designed for single-point 360-degree panoramic coverage. A buyer evaluating either would be choosing between a rugged, simplified deployment tool and a full-featured AI-analytics platform. The comparison covers imaging performance, environmental and installation specs, and integration depth—areas where the two products diverge significantly despite sharing the same resolution class and camera type.
In This Guide
How do the imaging specs compare?
Both cameras deliver 5MP resolution through a fisheye lens. The i-PRO WV-S4556LA specifies a 0.84mm focal length lens with a 1:2.4 maximum aperture ratio and a 186° horizontal and vertical field of view, backed by an Ambarella CV22 SoC. It provides detailed low-light figures—0.15 lx in color and 0.02 lx in black-and-white—along with a built-in 14m IR illuminator with selectable power, a maximum dynamic range of 120 dB (Super Dynamic on, level 31), and a maximum shutter range from 16/30s to 1/10000s. The Geovision FER5302-0S1U specifies a 1.05mm fisheye lens but provides no sensor type, minimum illumination, dynamic range, frame rate, or shutter speed data in the supplied specifications.
For installers who require quantified low-light performance, IR range, or WDR figures to meet a lighting or coverage specification, the i-PRO supplies those numbers while the Geovision does not. The i-PRO also supports digital zoom at 1x, 2x, and 4x levels and outputs resolution up to 2192×2192 in ceiling mount mode. No equivalent resolution output or zoom data is provided for the Geovision.
What about installation and environment?
Both cameras carry an IK10 impact rating per IEC 62262. Their IP ratings differ: the Geovision FER5302-0S1U is rated IP67, meaning dust-tight with tolerance for temporary immersion to 1 meter, while the i-PRO WV-S4556LA is rated IP66 and NEMA 4X (Type 4X per UL50), which covers powerful water jets but not immersion. The i-PRO additionally specifies wind resistance up to 40 m/s (approximately 89 mph), an EN50155-TX railway application rating, and an anti-condensation Rosahl element. Operating temperature for the i-PRO is rated at -40°C to +60°C with 10–100% humidity tolerance. No operating temperature or humidity specification is provided for the Geovision.
Both cameras are powered via PoE over an RJ45 Ethernet connection. The i-PRO specifies 802.3af PoE Class 0 at 12.4–12.5W, or alternatively DC12V at 1.03A. No PoE class or wattage figure is provided for the Geovision. The i-PRO body is described as aluminum, stainless steel, and polycarbonate with a dome form factor weighing approximately 870g with plate or 1.3kg with bracket. The Geovision is described as a housing form factor with a 1-meter cable; no weight or material data is specified.
Which fits your VMS and analytics better?
The i-PRO WV-S4556LA declares ONVIF Profile G, M, S, and T compliance, H.265/H.264 compression with CBR/VBR and unicast/multicast support, smart coding (GOP control and Auto VIQS), and supports up to 14 concurrent users. It includes onboard AI analytics: AI-VMD, AI People Counting optimized for 360-degree fisheye, AI Privacy Guard, AI Scene Change Detection, and AI Sound Classification covering gunshot, yell, vehicle horn, and glass break. Video Motion Detection supports 4 areas; Scene Change Detection covers 1 area. Audio input (3.5mm stereo mini jack, plug-in power) and audio output (3.5mm stereo jack, 600Ω) are built in. External I/O includes 3 alarm inputs, 1 alarm output, and 1 aux output. Alarm actions include email, HTTP, and TCP notification. microSD storage support is listed. Safety certifications include UL62368-1, c-UL, CE, and IEC62368-1; EMC covers FCC Part 15 Class A, ICES003 Class A, EN55032 Class B, and EN50121 among others. The camera carries a stated 5-year warranty.
The Geovision FER5302-0S1U lists Ethernet connectivity and PoE power but provides no ONVIF compliance data, no codec or compression specification, no analytics capabilities, no audio support, no alarm I/O, no onboard storage specification, no certifications, and no warranty term in the supplied specifications. Buyers integrating into a VMS or requiring edge analytics must verify these details directly with Geovision before making an assumption of compatibility.
Which should you choose: the FER5302-0S1U or the S4556LA?
Our take: The WV-S4556LA is the stronger choice when edge analytics, certified environmental performance, and deep VMS integration are required. Spec-for-spec, the i-PRO provides quantified low-light sensitivity (0.15 lx color / 0.02 lx B&W) versus no illumination figure for the Geovision, a 14m built-in IR illuminator versus none specified for the Geovision, and a validated operating range of -40°C to +60°C versus no temperature rating provided for the Geovision. The i-PRO also adds AI-VMD, people counting, sound classification, ONVIF G/M/S/T, and external alarm I/O—none of which appear in the Geovision's supplied data. The Geovision FER5302-0S1U holds one concrete environmental edge: IP67 immersion tolerance versus IP66 on the i-PRO. If the installation involves submersion risk or a simplified, low-integration deployment where immersion protection is the primary driver and analytics are handled upstream, the Geovision warrants evaluation—provided the installer first confirms codec, ONVIF, and storage support directly with Geovision.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision FER5302-0S1U | i-PRO S4556LA |
|---|---|---|
| Resolution | 5MP | 5MP |
| Image Sensor | — | Approx. 1/3 type 5MP CMOS |
| Lens / Focal Length | 1.05mm Fisheye | 0.84mm Fixed, 1:2.4 Aperture |
| Field of View | — | 186° H × 186° V |
| Min. Illumination | — | 0.15 lx (Color) / 0.02 lx (B&W) |
| Built-in IR / IR Range | — | Yes / 14m (45 ft), Selectable Power |
| Max. Dynamic Range (WDR) | — | 120 dB (Super Dynamic On, Level 31) |
| Max. Frame Rate | — | 30 fps |
| Video Compression | — | H.265 / H.264 (CBR/VBR, Unicast/Multicast) |
| IP Rating | IP67 | IP66 / NEMA 4X (Type 4X) |
| IK / Impact Rating | IK10 | IK10 / 50J (IEC 60068-2-75) |
| Operating Temperature | — | -40°C to +60°C |
| Power Input / PoE Class | PoE (Class not specified) | PoE 802.3af Class 0 / DC12V 1.03A (12.4–12.5W) |
| ONVIF Compliance | — | Profile G / M / S / T |
| Edge Analytics | — | AI-VMD, AI People Counting, AI Sound Classification, AI Privacy Guard, AI Scene Change Detection |
| Audio I/O | — | 3.5mm Mic Input / 3.5mm Line Output |
| Alarm I/O | — | 3x In / 1x Out / 1x Aux Out |
| Onboard Storage | — | microSD |
| Warranty | — | 5 Years |
Frequently Asked Questions
Which should you choose: the FER5302-0S1U or the S4556LA?
The WV-S4556LA is the stronger choice when edge analytics, certified environmental performance, and deep VMS integration are required. Spec-for-spec, the i-PRO provides quantified low-light sensitivity (0.15 lx color / 0.02 lx B&W) versus no illumination figure for the Geovision, a 14m built-in IR illuminator versus none specified for the Geovision, and a validated operating range of -40°C to +60°C versus no temperature rating provided for the Geovision. The i-PRO also adds AI-VMD, people counting, sound classification, ONVIF G/M/S/T, and external alarm I/O—none of which appear in the Geovision's supplied data. The Geovision FER5302-0S1U holds one concrete environmental edge: IP67 immersion tolerance versus IP66 on the i-PRO. If the installation involves submersion risk or a simplified, low-integration deployment where immersion protection is the primary driver and analytics are handled upstream, the Geovision warrants evaluation—provided the installer first confirms codec, ONVIF, and storage support directly with Geovision.
Is the Geovision FER5302-0S1U or the i-PRO S4556LA better for low-light performance?
Based on the supplied specifications, only the i-PRO WV-S4556LA provides quantified low-light figures: 0.15 lx in color and 0.02 lx in black-and-white, plus a 14m built-in IR illuminator. The Geovision FER5302-0S1U does not include minimum illumination or IR specifications in its supplied data, so a direct low-light comparison cannot be made from spec sheets alone.
Which camera is better protected against physical damage and harsh weather?
Both cameras are rated IK10 for impact resistance. For water and dust ingress, the Geovision FER5302-0S1U is rated IP67 (dust-tight, immersion to 1m), while the i-PRO WV-S4556LA is rated IP66 and NEMA 4X (dust-tight, powerful water jets, but not immersion). The i-PRO additionally specifies a wind resistance of up to 40 m/s and an EN50155 railway rating. For immersion scenarios, the Geovision's IP67 rating is superior; for railway or extreme-wind environments, the i-PRO provides documented certifications the Geovision's supplied specs do not.
Does either camera support ONVIF and edge analytics for integration with a third-party VMS?
The i-PRO WV-S4556LA specifies ONVIF Profile G, M, S, and T compliance, along with onboard AI analytics including AI-VMD, AI People Counting, AI Sound Classification, and AI Privacy Guard. The Geovision FER5302-0S1U's supplied specifications do not include ONVIF compliance data, codec information, or any analytics capabilities. Buyers requiring confirmed VMS integration or edge analytics should verify Geovision's compatibility documentation separately before selecting the FER5302-0S1U.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.