Comelit UT8020 4MP IP Audio/Video Module
Overview
The Comelit UT8020 is a wall-mounted audio/video endpoint designed for integration into Comelit Ultra IP (VIP) intercom systems. This module captures 4MP video and provides two-way audio through an integrated microphone, enabling real-time visitor verification and access control in residential and light commercial deployments. Power arrives via PoE+ (802.3at), eliminating the need for separate power runs and reducing installation labor on new and retrofit intercom projects.
Key Features
- 4MP video resolution: Delivers 2560 × 1920 pixel capture, providing sufficient detail to identify facial features and read documentation at typical door entry distances (3–8 feet). This resolution strikes a balance between clarity and network bandwidth — meaningfully better than standard 1080p for security purposes, without the storage overhead of higher megapixel models in the same family.
- PoE+ (802.3at) power delivery: Draws power directly from your network switch via a single Ethernet cable. No auxiliary DC power supply or hardwired 24VAC circuit required, which cuts installation time and simplifies cabling in retrofit scenarios where running new power lines is impractical.
- Integrated two-way microphone: Built-in audio input and output support live voice communication between the entry point and indoor stations. Critical for intercom functionality — eliminates the need for a separate audio module in many deployments.
- Wall-mount form factor: Compact surface-mounted design fits standard door frames and entry vestibules. Mounting hardware is straightforward, allowing installation by integrators without specialized tools.
- Ultra IP (VIP) system integration: Functions as a native video and audio endpoint within Comelit's networked intercom architecture. Works with Comelit Ultra IP door stations, indoor monitors, and cloud-based management interfaces to create unified access control and intercom workflows.
- Standard Ethernet connectivity: ONVIF-compliant network interface allows configuration and video streaming through standard IP-based tools and third-party integration platforms where documented compatibility exists.
Integration and Compatibility
The UT8020 is designed for deployment within Comelit Ultra IP system architectures. It functions as a video and audio endpoint on your network infrastructure, requiring only an Ethernet connection and PoE+ power. When planning a retrofit or new installation, confirm that your existing network switch supports PoE+ output (minimum 30W per port) to avoid overloading power budgets on older infrastructure. Consult NVR selection guides for recording and retention planning if you intend to log video from multiple entry points.
When to Choose a Different Model
If you require higher resolution for long-distance identification (more than 12 feet from the entry point) or if you need to integrate with third-party intercom systems outside the Comelit ecosystem, consider other options within the Comelit lineup or consult your systems integrator for compatibility assessment. The UT8020 is optimized specifically for Comelit Ultra IP deployments — choosing it for standalone or non-Comelit-centric projects may limit feature access and support resources.
Frequently Asked Questions
Q: Does the Comelit UT8020 require a separate PoE+ injector, or will standard PoE (802.3af) work?
A: The UT8020 requires PoE+ (802.3at), which supplies up to 30W. Standard 802.3af (15.4W) is insufficient. If your network switch does not have native PoE+ ports, you will need a dedicated PoE+ injector on that run.
Q: Can the UT8020 be used as a standalone IP camera outside a Comelit intercom system?
A: The UT8020 is optimized for and functions best within Comelit Ultra IP system deployments. Standalone or third-party VMS use may be technically possible but is not the intended use case and may limit feature availability.
Q: What is the field of view on the UT8020?
A: Specific lens focal length and angle of view are not detailed in the available evidence. Contact the manufacturer or your local systems integrator for precise FOV specifications before finalizing door-frame mounting layouts.
Q: Is the UT8020 rated for outdoor installation?
A: The UT8020 is designed for indoor wall-mounted applications. If you require an outdoor-rated entry camera, consult the broader Comelit catalog or your integrator for weatherproof alternatives.
Q: What video compression formats does the UT8020 support?
A: Compression codec details are not specified in the available technical evidence. Consult the full datasheet or your distributor for H.264, H.265, and MJPEG support information.
Q: Can I integrate the UT8020 with a third-party NVR or video management system?
A: The UT8020 is designed as a component of the Comelit Ultra IP ecosystem. ONVIF compliance may enable some cross-platform functionality, but this is not the primary use case. Verify compatibility with your chosen VMS before procurement.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Comelit UT8020 occupies a narrow but valuable niche: it's a purpose-built audio/video endpoint for Comelit's Ultra IP intercom ecosystem, not a general-purpose surveillance camera. The 4MP sensor and integrated microphone are specifically tuned for door-entry scenarios, and the PoE+ power model eliminates the most common installation friction point — having to run separate power for each entry unit. If you're standardized on Comelit intercom infrastructure, this is a straightforward choice. If you're evaluating multi-vendor access control, this product's tight integration with Ultra IP means compatibility questions need to be settled early.
Technical Highlights:
- 4MP video resolution on a wall-mount form factor: Provides sufficient facial detail for identity verification at typical door stations (3–8 feet) without the added complexity of PTZ or the storage burden of higher megapixel variants. The resolution-to-bandwidth ratio is pragmatic for continuous recording in residential or light commercial multi-unit deployments.
- PoE+ (802.3at) power model: Draws 30W maximum via Ethernet, simplifying retrofit scenarios where running new 24VAC or DC power lines would otherwise add weeks of labor and cost. A single Ethernet run handles both data and power — this is the single largest installation cost reducer for multi-unit entry systems.
- Native two-way audio: Integrated microphone support means you don't need a separate audio module or external microphone breakout. This tightness is deliberate: Comelit's engineering assumes a complete subsystem, not piecemeal audio bolting.
Deployment Considerations:
- PoE+ power budget is non-negotiable: verify your switch has PoE+ capacity (30W per port minimum) before ordering. Standard 802.3af will not work, and field substitution is not an option. Budget this into your infrastructure planning.
- The UT8020 is a subsystem component, not a standalone camera. Its value depends entirely on having a functioning Ultra IP deployment alongside it. Do not select this model if your primary VMS or intercom platform is not Comelit — you will face integration friction and limited feature access.
- Lens and compression codec specifics are not published in accessible datasheets. Confirm FOV, bandwidth requirements, and recording format compatibility with Comelit technical support or your systems integrator before finalizing a large-scale rollout.
The UT8020 makes sense for residential and light commercial multi-unit buildings where Comelit intercom is already the platform standard, new construction with existing Comelit infrastructure, and retrofit projects where eliminating separate power infrastructure is a primary cost driver. For single-door entry points, standalone IP camera solutions may be simpler. For enterprises with heterogeneous access control platforms, this model's tight coupling to Ultra IP is a liability, not an asset.
