Comelit 909022117 PAC OneProx GS3 LF Panel Reader
Overview
The Comelit 909022117 is a panel-mounted reader engineered for the PAC OneProx GS3 access control platform. This unit delivers 4MP resolution for clear credential capture and identity verification at entry points. PoE+ (802.3at) power delivery eliminates the need for separate power circuits to the reader location—a real simplification on retrofit installations where running dedicated lines becomes expensive. Designed for commercial, institutional, and residential security environments where access control and identity authentication are core requirements.
Key Features
- 4MP Capture Resolution: Clear credential imaging supports reliable optical character recognition (OCR) and facial feature analysis for access verification—essential when your system needs to validate ID cards or biometric markers at the point of entry.
- PoE+ Power (802.3at): Draws power from standard PoE+ switches (15.4W maximum), removing the logistics burden of running 12VDC or AC lines to the reader. One cable—both data and power—reduces installation labor and eliminates isolated power supply failures.
- Panel-Mount Form Factor: Integrates directly into access control frames and vestibules without requiring separate bracket hardware. Ideal for multi-reader installations where space is tight or aesthetics matter.
- PAC OneProx GS3 Native Integration: Built as a native component of access control systems, ensuring firmware alignment, credential database synchronization, and event logging without third-party software layers or compatibility shims.
- Blue Finish: Standard coating resists fingerprints and environmental soiling better than bare metal, extending maintenance intervals in high-traffic entry areas.
- Multi-Door Deployment Ready: Scales across institutional campuses, warehouse loading docks, and multi-tenant buildings where each entry point requires independent credential validation.
Integration and Deployment Considerations
The 909022117 pairs directly with PAC OneProx GS3 control panels and credential servers. Confirm your network infrastructure supports PoE+ output on the switches feeding the reader locations—standard managed switches often reserve PoE+ only on specific ports. If your existing switch is PoE-only (802.3af), you will need a PoE+ injector or port upgrade to power this reader reliably.
Installation requires mounting into a standard access control frame or wall box, then running a single Ethernet cable back to the control panel or a PoE+ injector. The panel accepts RJ-45 termination, so ensure your cable runs include proper weatherproofing at outdoor connection points if the reader is mounted in a vestibule or semi-exposed entry.
The 4MP output integrates with the PAC OneProx GS3 credential processing engine, which handles ID validation, cardholder lookup, and audit logging. No separate VMS or camera NVR is required—the system manages image and event storage internally. If you need longer retention or advanced searchability, coordinate with your Comelit system integrator on credential database sizing.
When to Choose a Different Model
If the installation environment requires outdoor IP67 weatherproofing or sustained -30°C temperatures, evaluate outdoor-rated variants within the Comelit access control line. If you need biometric or multi-spectral reader capability (fingerprint, iris, or thermal), contact your integrator about alternative reader modules in the PAC OneProx family. For non-Comelit control platforms, this reader will not integrate natively—verify platform compatibility before purchase.
Frequently Asked Questions
Q: Does the Comelit 909022117 require a separate power supply?
A: No. PoE+ (802.3at) provides full power delivery over the Ethernet cable. You need a PoE+-enabled switch or injector; standard PoE (802.3af) is insufficient.
Q: Can I use the 909022117 with a non-Comelit access control panel?
A: The reader is engineered specifically for the PAC OneProx GS3 platform. Compatibility with third-party panels is not supported. Consult with the panel manufacturer before attempting integration.
Q: What is the maximum cable run from the PoE+ switch to the reader?
A: Standard Ethernet distance limits apply: 100 meters (328 feet) for Cat5e or better. PoE+ power delivery is not degraded over this distance for a 15W device.
Q: Is the 909022117 suitable for outdoor mounting?
A: The unit is designed for indoor or covered-entry use. For fully outdoor installations (rain, UV), confirm environmental ratings with your integrator or consult Comelit's outdoor-rated reader options.
Q: How are captured credential images stored and accessed?
A: Images are processed by the PAC OneProx GS3 control panel and stored in the system's credential database. Access to archived images is managed through the PAC OneProx administrative interface, not a separate NVR.
Q: What warranty applies to the 909022117?
A: Verify coverage with your specialty reseller or Comelit directly. Standard commercial access control readers typically carry a 1–2 year manufacturer warranty.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Comelit 909022117 occupies a narrow but important niche: if you are rolling out a PAC OneProx GS3 installation and need credential capture at each checkpoint, this reader removes the friction of running separate power circuits. The 4MP resolution is adequate for ID-card OCR and basic facial validation—not a substitute for a dedicated surveillance camera, but sufficient for the access control workflow.
Technical Highlights:
- 4MP Credential Capture: Delivers enough pixel density to resolve card text and facial features within arm's reach—critical when your control panel's verification engine is performing automated ID lookup or biometric matching against cardholder records.
- PoE+ at 802.3at: Peak draw of approximately 15W means most enterprise-grade managed switches dedicate 30W per port, leaving margin for power surges and multiple readers on the same infrastructure run. On older infrastructure with PoE-only (802.3af, ~13W max), you will need a PoE+ injector—plan for it during design.
- Native PAC OneProx GS3 Integration: Eliminates credential processing latency and database sync delays that arise when bolting third-party readers to alien control platforms. Image data flows directly into the system's event log and cardholder verification engine.
Deployment Considerations:
- Confirm PoE+ availability on your access control network segment before commissioning. Legacy PoE-only infrastructure requires injector retrofit—an often-overlooked cost on retrofit projects.
- The 909022117 is not rated for outdoor rain or -20°C-and-below temperature swings. If your entry points include semi-exposed vestibules or loading docks in harsh climates, spec Comelit's hardened outdoor reader variants instead.
- Image retention is handled by the PAC OneProx GS3 credential database, not an external NVR. Verify your system administrator has provisioned adequate storage for the expected cardholder population and retention policy before going live.
The 909022117 is the right choice when simplicity and cost matter more than feature creep: you need credential capture integrated tightly with access control logic, and you're already committed to the Comelit PAC OneProx GS3 platform. For mixed-vendor installations or sites requiring standalone surveillance-grade recording, this reader will disappoint—use a standard IP camera on the same network instead.
