Comelit 33411M IKALL Metal Video Module - 1 Button
The Comelit 33411M is a metal-housed single-button video module engineered for IKALL intercom installations. This compact video entry point adds or upgrades video capability in residential and light-commercial access control deployments without requiring system-wide redesign. The stainless steel construction resists corrosion in semi-outdoor mounting environments, and the one-button interface integrates seamlessly into existing IKALL wiring and power infrastructure. It's the go-to replacement or expansion module when you need a durable video callbox for door entry verification or tenant access control.
Key Features
- Metal Housing: Stainless steel construction rated for outdoor/semi-outdoor environments. Eliminates corrosion concerns on exterior walls or covered entry vestibules.
- Single-Button Design: One call button simplifies user operation and reduces maintenance points compared to multi-button panels.
- IKALL System Integration: Wiring and power compatible with Comelit IKALL platforms. No additional cabling topology or controller upgrades required.
- Compact Form Factor: 4.41" × 3.52" footprint fits standard mounting surfaces without panel modification or special installation brackets.
- Optional LED Nameplate: Available with blue, white, or no illumination for visual identification in low-light entry areas.
- Video Module: Integrates video signaling into IKALL speaker units and handsets, enabling visual verification before door release.
- 2-Year Warranty: Manufacturer coverage for defects in materials and workmanship.
- US Origin: Domestic manufacturing supports supply chain continuity and warranty service response.
The 33411M is a modular component—it is not a standalone unit and must be integrated into an active IKALL system with compatible speaker units, power distribution, and cabling. Before ordering, verify your installed IKALL revision, cabling topology, and speaker unit models with your system integrator or Comelit technical support. Incompatible cabling or power source configuration will prevent video and audio signaling.
Installation requires wall or panel mounting suitable for the module's 4.41" width and 1.26" depth. Ensure your mounting surface can support the hardware weight (0.18 lb) and that any exposed wiring complies with local electrical codes and IKALL system specifications. LED nameplate color (if selected) must be chosen at time of order—it is not field-configurable after manufacture. Semi-outdoor installations should be protected from direct rain spray and temperature extremes; review Comelit's environmental ratings for your specific climate zone before final placement.
The modular architecture of the 33411M makes it ideal for phased IKALL deployments where video capability is added incrementally across a multi-unit or multi-building property. Each module occupies one position on the IKALL system wiring backbone, and multiple modules can coexist on the same system, provided the power budget and control architecture support the load. Consult the IKALL system datasheet and your control unit's port density to confirm capacity before installation.
Comelit backs the 33411M with a 2-year manufacturer warranty covering defects in materials and construction. Service and technical support are available through authorized distributors and Comelit directly. The stainless steel housing and modular design support a 10+ year service life in typical residential and light-commercial environments, making this module a cost-effective long-term component for access control refresh cycles.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
We've installed the Comelit 33411M across residential multifamily and small commercial properties as a cost-effective video entry upgrade path for existing IKALL systems. The real operational value is that it's a drop-in module—no system controller firmware updates, no new power supplies, no cabling infrastructure overhaul. If your IKALL system is already wired and powered, this module plugs into the existing topology. The stainless steel housing is genuinely corrosion-resistant on covered porches and vestibules; we've seen units survive five-plus years in salt-air environments without degradation. Where the 33411M differs from larger video panel systems is scale: it's single-button only, so it's appropriate for single-family homes, duplex entry points, or small commercial gates. Multi-tenant buildings or high-traffic lobbies typically need a larger IKALL panel with multiple buttons and display. The one-button constraint is intentional—it keeps installation simple and cost predictable. LED nameplate color is a pre-manufacture choice, so think through your branding or visibility needs before ordering; you cannot swap it out in the field. The 0.18 lb weight and compact footprint mean almost any wall surface can accommodate it without reinforcement.
Technical Highlights:
- Stainless Steel Housing: Outdoor environment rating—survives rain, dust, and salt-spray exposure without corrosion or finish degradation. No special coating touch-ups or seasonal maintenance required.
- IKALL Wiring Compatibility: Works with existing IKALL system cabling and power without adapter modules or additional power supplies. Field integration time is typically 30 minutes per module, including wall preparation and cable routing.
- Single-Button Architecture: Reduces call-routing complexity compared to multi-button panels. One button routes to one handset or speaker unit—no confusion about which button to press, lower user-error rates.
- Compact Dimensions (4.41" × 3.52" face): Fits standard residential entry surfaces and recessed wall boxes. No custom brackets or panel redesign needed; integrators appreciate the off-the-shelf installation without fabrication delays.
- Optional LED Illumination: Blue or white nameplate lighting improves visibility in low-light entry areas and adds subtle branding cues. Nominal power draw (<100 mA per LED) does not materially impact IKALL system power budget.
- Video Module Integration: Carries video signal to paired IKALL speaker units or handsets. Enables visual door-unlock verification and tenant screening before buzzer release.
Deployment Considerations:
- Module-only component—must be integrated into an active, compatible IKALL system. Verify your installed IKALL revision and existing speaker unit model numbers before ordering; incompatible cabling topology will prevent video and audio signaling.
- LED nameplate color is selected at manufacture and cannot be field-changed. Decide on blue, white, or no illumination before submitting the order; any color swap requires returning the unit.
- Power and signal integrity depend entirely on IKALL system cabling compliance. Do not use Cat5e or non-twisted-pair wiring as a cost-cutting measure—signal degradation on video lines is common and difficult to troubleshoot after installation. Insist on cabling that meets Comelit spec.
- Semi-outdoor mounting (covered vestibules, carport entry gates) is supported by the outdoor environment rating; fully exposed outdoor mounting (direct rain/UV) should be confirmed with Comelit before deployment. Drainage and moisture protection around the mounting hole are the installer's responsibility.
- The 33411M occupies one port on the IKALL control backbone. If your system is near port capacity, confirm that your controller and power supply can handle the additional module load before installation.
The Comelit 33411M is best suited for single-family residential homes, duplex entry points, and small commercial gate access where one video call button covers the need. If you're managing a multi-tenant building or high-traffic lobby, you'll likely want a larger multi-button IKALL video panel instead. For incremental video upgrades to an existing IKALL footprint, this module is the most cost-effective and fastest path to deployment. See our complete Comelit catalog for other intercom and video entry solutions.
