Panduit TM3S10-C Screw-Applied Cable Tie Mount

The Panduit TM3S10-C addresses a recurring problem in structured cabling and surveillance installs: securing cable bundles to mounting surfaces without sacrificing accessibility or creating strain points. This screw-applied tie mount uses a through-hole design that accepts #10 (M5) screws or rivets, delivering maximum holding force for bundles routed along walls, J-hooks, ladder rack, or equipment chassis. The cradle geometry keeps ties centered and prevents lateral shift under vibration or tension. Nylon 6.6 construction handles temperatures from -40°F to 185°F and resists UV degradation in plenum or outdoor J-box applications. Ships 100 per package, 500 per carton.

Key Features

• Through-hole mount for #10 (M5) screw or rivet — no adhesive failure risk
• Cradle design stabilizes bundles and eliminates side-to-side play
• Nylon 6.6 material: high tensile strength, heat resistance to 185°F, flame-rated
• Compatible with Panduit miniature, intermediate, standard, and light-heavy ties
• Low-profile 0.37" height keeps bundles tight to surface
• Natural color blends with white/beige wall plates and conduit
• UL recognized (E136577), CE compliant, RoHS compliant

Screw-applied mounts solve the adhesive-failure problem common in dusty, cold, or humid environments — data centers with fluctuating temperatures, outdoor camera J-boxes, parking garage conduit runs. The through-hole accepts sheet-metal screws, wood screws, or pan-head machine screws, so you can anchor to steel studs, plywood backboards, equipment racks, or enclosure panels. The 0.86" base length provides enough surface contact to resist torque when bundles shift during adds-and-moves. Cradle wings capture the tie head and prevent the bundle from rotating or sliding off-center, which matters when you're routing 50+ Cat6 cables along a tray or grouping PoE+ drops above a ceiling grid.

Nylon 6.6 offers better mechanical properties than standard nylon or polypropylene mounts: higher tensile strength (80 MPa vs. 30 MPa for PP), better creep resistance under continuous load, and a wider temperature range. In surveillance installs, that translates to mounts that won't sag or crack when exposed to attic heat or freezing temps in unheated MDF rooms. The material is also self-extinguishing (UL 94 V-2 rating), which satisfies NEC 300.22(C) plenum requirements when used with plenum-rated ties. Natural color is UV-stabilized, so outdoor mounts won't yellow or become brittle after 2-3 years of sun exposure on building exteriors or under eaves.

This mount is sized for Panduit's miniature through light-heavy tie families, covering bundle diameters from 0.25" to 2.5". For typical commercial jobs — grouping 12-24 Cat6 cables at a switch, securing coax and power drops at a camera, or bundling fiber patch cords in a server rack — you'll pair these with PLT1M (miniature) or PLT2S (standard) ties. The 0.61" width accommodates tie heads up to 0.5" wide, which includes most intermediate and standard cross-sections. If you're bundling heavier loads (3" diameter conduit drops, thick power cables), step up to Panduit's TM4S or ABM mounts with wider cradles.

Ships 100 mounts per package, 500 per carton. UL recognized under file E136577 for use in cable management systems. CE marked for EU installations. RoHS compliant for projects with hazardous-substance restrictions (government, healthcare, EU exports). For integration projects requiring documented compliance with building codes, sustainability mandates, or manufacturer warranties, Panduit's third-party certifications and 60+ year track record in structured cabling provide the audit trail procurement and GCs expect.