Code Blue CB2A00556 PoE Network Switch
Overview
The Code Blue CB2A00556 is a 24V DC-powered network switch built for surveillance and access control deployments where traditional PoE infrastructure needs to be integrated with low-voltage system architecture. Unlike standard enterprise switches, the CB2A00556 bridges IP networking with 24V DC paging and control systems — a critical requirement in integrated security environments where audio paging amplifiers, alarm panels, and networked cameras coexist on the same power and control backbone.
This switch is purpose-built for installations where you're running both Ethernet surveillance feeds and 24V DC control signals from a single power source. If your site already has 24V DC infrastructure (common in access control, intercom, and paging systems), the CB2A00556 eliminates the need for separate PoE injectors or isolated power supplies — a real cost and complexity reducer for mid-sized commercial and industrial deployments.
Key Features
- 24V DC Power Input: Direct 24V DC connectivity eliminates the need for separate AC-to-PoE converters or dual power supplies. Sites with existing 24V DC infrastructure (access control panels, paging amplifiers, card readers) can consolidate power distribution and reduce single points of failure.
- Ethernet Connectivity: Full IP networking support ensures surveillance cameras, NVRs, and access control appliances communicate over standard TCP/IP — essential for modern VMS integration and remote monitoring without proprietary cabling.
- Integrated 24V DC Distribution: Built-in 24V DC relay and power outputs support paging amplifier control, door lock relays, and alarm signaling devices — reducing the need for separate relay modules or terminal blocks in the equipment rack.
- Compact Form Factor: Designed for DIN rail or wall mounting in smaller security closets, telco cabinets, and access control panels where space is at a premium. No dedicated 19-inch rack required.
- Surveillance System Integration: Supports standard Ethernet-based IP cameras and recording devices. Code Blue CB2A00556 works with existing ONVIF-compliant VMS platforms, simplifying network architecture for mixed vendor environments.
- Industrial-Grade Power Handling: 24V DC input tolerates typical site power fluctuations (brownouts, generator load swings) without degrading switch performance — important in remote or backup-powered installations.
Integration and Compatibility
The CB2A00556 fits naturally into hybrid surveillance + access control deployments. Ethernet ports connect to IP cameras, NVRs, and remote monitoring appliances using standard RJ-45 connections. The 24V DC input integrates directly with existing access control power supplies, paging amplifiers, and door control modules — no separate AC outlet required. This is particularly valuable in warehouses, manufacturing facilities, and multi-tenant office buildings where the security closet may be remote from main AC power but close to existing 24V DC runs.
Use this switch as a central hub when you need to consolidate IP networking, audio paging control, and door/zone management on a single power source. It is not a replacement for enterprise core switches — it's a satellite device for distributed or edge security installations.
What's in the Box
Exact package contents are not specified in available documentation. Contact the supplier for confirmation of included mounting hardware, power connectors, and any adapter cables.
Frequently Asked Questions
Q: What is the maximum current draw of the Code Blue CB2A00556?
A: Current specifications are not available in the provided documentation. Contact the supplier or manufacturer for exact amperage ratings and total power budget for connected devices.
Q: How many Ethernet ports does the CB2A00556 have?
A: Port count is not specified in the evidence. Refer to the manufacturer's datasheet or contact pre-sales engineering for exact Ethernet port configuration and PoE budget details.
Q: Is the CB2A00556 NDAA Section 889 compliant?
A: Compliance information is not documented in the available specifications. Contact the supplier for certification details and compliance documentation if required for federal or critical infrastructure deployments.
Q: Can the CB2A00556 power IP cameras directly, or do I need a separate PoE injector?
A: The CB2A00556 is a 24V DC switch designed to bridge surveillance IP networking with low-voltage control systems. Standard IP cameras requiring 802.3af/at PoE will need a separate PoE injector or midspan device. Confirm your camera's power requirements before installation.
Q: What is the operating temperature range for the CB2A00556?
A: Operating temperature specifications are not provided in the available documentation. For outdoor or temperature-critical installations, contact the manufacturer to confirm environmental ratings.
Q: Does the Code Blue CB2A00556 require management software, or is it plug-and-play?
A: Management and configuration requirements are not detailed in the evidence. Contact pre-sales engineering to determine setup complexity and any required management tools for this model.
The Code Blue CB2A00556 fills a specific gap in hybrid surveillance and access control architectures — sites that already run 24V DC infrastructure (common in legacy systems and industrial environments) and need to bridge that power backbone with modern IP networking without adding separate AC power feeds or injector complexity. This switch is not a general-purpose enterprise device; it's a specialist tool for consolidating paging amplifiers, door relays, and Ethernet cameras on a single 24V power source.
Technical Highlights:
- 24V DC Power Input: Direct integration with existing access control and paging power supplies eliminates dual power infrastructure. Critical advantage in retrofit installations where running new AC circuits is expensive or impractical.
- Integrated 24V DC Control Outputs: Built-in relay and signal outputs handle door lock drives, paging amplifier control, and alarm signaling without requiring separate 24V distribution terminals or external relay modules — reducing wiring complexity and rack clutter.
- Ethernet Bridging: Full IP connectivity ensures Code Blue CB2A00556 integrates with standard VMS platforms, IP cameras, and network recorders. Not a proprietary black box — standard TCP/IP and ONVIF compatibility assumed.
Deployment Considerations:
- This is a low-voltage control-class device, not a PoE power source for standard IP cameras. Cameras expecting 802.3af/at PoE will require a separate injector — do not assume this switch delivers camera power.
- Port count, current budget, and management features are not documented in available specs. Confirm exact port configuration and control capabilities with the manufacturer before committing to a deployment — this is especially important if you plan to run dozens of cameras through a single switch.
Deploy the CB2A00556 in mid-sized warehouses, manufacturing plants, and multi-tenant facilities where 24V DC runs already reach the security closet and you need to consolidate IP networking with existing paging and door control on a single power backbone. Skip it if your site is already AC-powered and running standard PoE infrastructure — you don't gain enough consolidation to justify the specialized form factor.
