Panduit UTP6AX9MYL Cat 6A 9M Yellow Patch Cord

Panduit UTP6AX9MYL TX6A 10Gig Cat 6A Patch Cord

The Panduit TX6A UTP6AX9MYL delivers 10 Gb/s transmission over 9 meters (29.5 ft) for high-density datacenter, PoE++ IP camera trunk lines, and access control installations where alien crosstalk and cable management are daily challenges. Built with 24 AWG solid conductors and U/UTP construction, this Cat 6A patch cord uses solid foil tape shielding to limit alien crosstalk in tightly bundled environments while maintaining a slim 0.250-inch (6.4 mm) diameter that preserves airflow and rack space. The tangle-free latch design and pre-installed RapidID barcoding address the two biggest time-sinks in moves/adds/changes: snag-induced connector damage and undocumented port assignments.

Key Features

• 10 Gb/s transmission up to 100 meters, exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA
• 24 AWG solid copper conductors with U/UTP construction and solid foil tape alien crosstalk mitigation
• RapidID pre-installed barcodes for automated port mapping and documentation using Panduit RapidID software
• Tangle-free latch prevents snags during installation and removal in high-density patch panels
• IEEE 802.3bt Type 3 and Type 4 PoE++ rated for 2500 mating cycles, supports up to 90W per port
• 0.250-inch (6.4 mm) diameter for improved airflow and cable management in enclosed racks
• Yellow jacket for easy visual identification in mixed-protocol or VLAN-segregated networks
• CM-rated for in-building horizontal and riser installations, RoHS compliant

Solid 24 AWG conductors distinguish this patch cord from stranded-conductor variants common in desktop environments. Solid construction provides lower DC loop resistance and tighter impedance tolerance across the 1–500 MHz Cat 6A bandwidth, critical when you're pushing 10GBASE-T to the full 100-meter permanent link limit or running 90W PoE++ continuously. The U/UTP design pairs unshielded twisted pairs with a solid foil tape barrier that blocks alien crosstalk from adjacent cables without requiring grounded terminations or shielded jacks—eliminating a common failure mode in field installations where bonding and grounding are inconsistent. This construction meets ANSI/TIA-1096-A (formerly FCC Part 68) and IEC 60603-7 mechanical interface requirements, ensuring compatibility with standard RJ45 jacks across all major IP camera, NVR, switch, and access control manufacturers. The slim 6.4 mm diameter allows higher bundle density in cable trays and ladder racks compared to 0.285-inch legacy Cat 6A designs, improving convective cooling in enclosed switch cabinets and reducing the need for costly cable-management accessories.

RapidID barcoding ships pre-installed on each cord, integrating directly with Panduit's RapidID port-mapping software to automate documentation during installation and speed troubleshooting during MACs. Scan the barcode at the patch panel and at the remote jack, and the software logs the physical path, switch port assignment, and VLAN metadata into a searchable database—eliminating the toner-and-guess workflow that costs integrators billable hours on every service call. The tangle-free latch uses a snag-resistant boot geometry that clears dense patch-panel arrays without catching on adjacent cables, a recurring pain point when you're working 48-port panels in a live datacenter where every accidental unplug triggers an alarm. For PoE++ deployments—high-power PTZ cameras, 802.11ax access points, access control panels with integrated card readers—the 2500-cycle mating durability rating and IEEE 802.3bt Type 3/4 compliance ensure the termination can handle the thermal load and repeated connect/disconnect cycles inherent in IP surveillance and building-automation installs. The 9-meter length covers typical rack-to-equipment runs in small-to-medium datacenters or structured wiring closets where devices mount within 30 feet of the patch panel.

This cord's combination of solid-conductor permanent-link performance, alien-crosstalk mitigation for high-density bundles, and lifecycle documentation via RapidID makes it the right choice for integrators running 100+ PoE++ ports in a single installation where uptime, cable management, and future MAC efficiency determine whether the project stays profitable. The TX6A platform's proven field reliability and Panduit's 25-year system warranty (when installed per TX6A guidelines) provide the deployment confidence required for mission-critical access control, video surveillance, and converged IP infrastructure builds.