Panduit UTP6AX6MGR 6m Cat 6A UTP Patch Cord - Green

Panduit UTP6AX6MGR Cat 6A UTP Patch Cord

The Panduit UTP6AX6MGR is a 6-meter Cat 6A UTP patch cord engineered for 10GBASE-T networks in enterprise, datacenter, and commercial security installations. Built with 24 AWG solid conductors and high-performance RJ45 modular plugs, this green cord delivers full 10 Gb/s throughput over distances up to 100 meters when paired with compliant Cat 6A cabling infrastructure. The 0.250-inch (6.4mm) diameter and U/UTP (unshielded twisted pair) construction balance performance with flexibility for high-density patch panel and switch deployments.

Key Features

• Cat 6A 10Gig performance — exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA requirements for full 10 Gb/s Ethernet
• 24 AWG solid conductors with internal foil tape for alien crosstalk suppression
• Tangle-free latch design prevents snags during moves, adds, and changes in dense rack environments
• RapidID-enabled with pre-installed barcodes for automated port mapping and asset tracking
• PoE++ compliant — rated for IEEE 802.3bt Type 3 and Type 4 (up to 90W) over 2,500 mating cycles
• CM-rated jacket for plenum-alternative installations where CMP is not required
• 6-meter (19.7 ft) length ideal for cross-rack connections and IDF patch panel to switch runs

The UTP6AX6MGR uses Panduit's TX6A construction with solid foil tape shielding between pairs to limit alien crosstalk — the primary performance limiter in high-density Cat 6A deployments. Unlike standard Cat 6 cords, this design maintains the 500 MHz bandwidth and –10 dB return loss required for 10GBASE-T across the full 100-meter channel, even when bundled with dozens of other cables in high-EMI environments. The 24 AWG solid conductor provides lower DC resistance than stranded alternatives (9.38 Ω/100m max), reducing insertion loss and improving power delivery for PoE++ devices like PTZ cameras, multi-sensor panoramics, and 802.11ax access points drawing 60–90W.

Operationally, the tangle-free latch solves a recurring problem in crowded patch panels: traditional boot designs catch on adjacent cords during removal, forcing techs to work one-handed or risk damaging neighboring connections. Panduit's low-profile latch releases cleanly with a single finger press, cutting MAC cycle time in half during re-patching or troubleshooting. RapidID barcodes on each cord integrate with Panduit's mobile app for iOS/Android, allowing installers to scan patch cords during termination and auto-populate port maps, VLAN assignments, and device associations — eliminating the manual spreadsheet step that leads to documentation drift on large jobs.

Standards compliance includes ANSI/TIA-1096-A (formerly FCC Part 68) for telecom compatibility, IEC 60603-7 for international interoperability, and UL 1863 for communication cable safety. The modular plugs are rated for 2,500 insertion cycles under IEEE 802.3af/at/bt load, exceeding the TIA-568.2-D requirement of 750 cycles — critical for environments where patch cords are frequently re-patched during tenant moves or seasonal network reconfigurations. For integrators running IP camera networks, access control panels, or POS systems over Cat 6A infrastructure, this cord provides the headroom to support 10 Gb/s aggregation links, multi-gigabit PoE, and future 25GBASE-T upgrades without re-cabling.