Panduit UTP6AX29VL 10G Cat 6A Patch Cord - 29 ft - Violet

Panduit UTP6AX29VL TX6A 10Gig Cat 6A UTP Patch Cord - 29 ft, Violet

The Panduit UTP6AX29VL is a 29-foot Cat 6A patch cord engineered for 10GBASE-T networks in commercial surveillance, datacenter, and enterprise environments. Built on 24 AWG solid U/UTP cable with TX6A modular plugs, it delivers certified 10 Gb/s throughput to 100 meters while controlling alien crosstalk—critical when bundling dozens of high-speed links in cable management. The violet jacket provides instant visual identification in multi-service pathways, and factory-installed RapidID barcodes streamline port documentation during installs and MAC cycles. Rated CM and PoE++ compatible (802.3bt type 3/type 4), it's spec'd for IP camera uplinks, NVR trunks, and access-layer switching where full Cat 6A channel performance is required.

Key Features

• Cat 6A U/UTP construction — exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA for guaranteed 10 Gb/s to 100m
• 24 AWG solid copper conductors — lower DC resistance than stranded equivalents, optimized for short fixed runs
• Solid foil tape shielding — limits alien crosstalk (AXT) in high-density bundles without requiring grounded terminations
• TX6A modular plugs — rated 2,500 insertion cycles, field-proven plug geometry for multi-vendor switch compatibility
• RapidID pre-installed barcodes — scan-to-document port mappings using Panduit RapidID software, eliminating manual label errors
• Tangle-free latch design — snag-resistant boot releases cleanly from crowded patch panels, cutting MAC time
• 29-foot length, 0.250 in (6.4 mm) diameter — fits typical rack-to-adjacent-rack or cross-aisle runs in 42U datacenter rows
• Violet jacket (RAL color-coded) — instant visual ID in multi-protocol cabling (e.g., purple = surveillance VLAN, blue = management)
• PoE++ compatible — 802.3bt type 3 (60W) and type 4 (90W) rated for high-power PTZ cameras, wireless APs, and PoE lighting
• CM flame rating — ANSI/TIA-1096-A (FCC Part 68), UL 1863, RoHS compliant for permanent installation in commercial pathways (upgrade to CMP for air-handling spaces)

Solid-conductor patch cords occupy a niche between stranded work-area cords (flexible but higher attenuation) and permanent horizontal cabling (termination-intensive). The UTP6AX29VL's 24 AWG solid copper reduces insertion loss by ~0.5 dB/100m compared to stranded equivalents, preserving link margin on fully-loaded 100-meter channels where you're already running near the -36 dB attenuation limit at 500 MHz. The U/UTP construction—unshielded twisted pairs with a single overall foil tape—provides alien crosstalk isolation without the grounding complexity of F/UTP or S/FTP cables. In bundled runs (think 48-port switch uplinks zip-tied together in vertical cable managers), that foil tape keeps pair-to-pair interference from adjacent cords below the Class EA AXT limits, preventing the packet loss and retransmit storms that kill sustained 10G throughput. Unlike true unshielded (UTP) cords, you get crosstalk protection; unlike fully shielded designs, you avoid the ground-loop and bonding headaches that slow down large installs.

The factory RapidID barcode solves the documentation problem every integrator faces: a 48-port switch with 29-foot uplinks to a SAN or NVR cluster generates 48 cable IDs that need to match port numbers, VLANs, and endpoint devices. Scanning the QR code at each end auto-populates Panduit's RapidID software with MAC address, install date, circuit ID, and link status—no clipboard, no fat-fingering \"Port 23\" when you meant \"Port 32.\" During post-install audits or troubleshooting (\"Which cord goes to NVR-3 port 8?\"), you scan instead of trace, cutting mean-time-to-repair on a 2,000-drop campus from hours to minutes. The tangle-free latch compounds that speed gain: traditional snagless boots catch on adjacent cords during removal, forcing you to pull the whole bundle forward to get slack; Panduit's low-profile release mechanism disengages with a straight pull, even when surrounded by 47 other patch cords in a 1U panel. That's the difference between a 30-second swap and a 5-minute wrestling match when a camera uplink fails at 2 a.m.

Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA insertion loss, return loss, and near-end crosstalk specs across the full 1–500 MHz bandwidth, with PoE++ type 4 validation to 90W continuous (the DC resistance and heat-rise testing required for 802.3bt). Meets ANSI/TIA-1096-A plug durability (2,500 cycles) and IEC 60603-7 contact-retention specs. The 29-foot length bridges typical rack-to-rack spacing (42U cabinet + 6 ft aisle + 42U cabinet ≈ 20–25 ft cable path after vertical/horizontal routing); order in 10-packs (carton quantity) to outfit a full row with spares. For air-handling spaces above drop ceilings, substitute Panduit's CMP-rated Cat 6A cords; the CM jacket on this SKU is code-compliant only in non-plenum horizontal pathways and equipment rooms.